Monster Clarity 100 Airlinks true wireless bluetooth headset
Monster Clarity 100 Airlinks

Product specification

Product number : Monster Clarity 100 Airlinks
Drive unit : 6mm moving coil
Bluetooth version : 5.0
Water proof coefficient : IPX5
Audio decoding : SBC、AAC
Charging performance of the charging compartment : DC 5.0V
Endurance : About 5 hours
The number of times the charging compartment recharges the headset : About 4.5 next
Charging Time : Approximately 1.5 hours for earphones, 1.2 hours for charging box
Weight : 51g


Bluetooth pairing

  1. Take out the left and right earphones at the same time
  2. When you hear the “pairing” prompt (the blue indicator light is flashing), turn on the Bluetooth of the device to be connected and connect Connect to “Monster Clarity 100 Airlinks”
  3. If the connection is successful, you will hear the “connected” prompt (the blue indicator flashes once in 6 seconds)
  4. Single ear mode: Take out the single earphone from the charging box, after the earphone is paired with the device, you can use the single ear operation

Reset method

  1. Please delete the Bluetooth connection record on the phone first
  2. Please take out the earphones, press both sides simultaneously for 8 seconds, the earphones will sound Power Off, come again There will be two beeps and the headset will automatically clear all pairing information.


  1. Switch on/off: Take out/put back the charging box
  2. Adjust the volume level: tap the left ear 2 times (down)/right ear 2 times (up)
  3. Switch tracks: Tap and hold the left ear for 2 seconds (top)/right ear for 2 seconds (bottom)
  4. Play/pause, answer/hang up: tap the left/right ear once
  5. Voice assistant (not during music playback): click on either side of the earphone once (not during music playback)
  6. Reject the call: Long press the left/right ear for 2 seconds to reject the call

Monster Clarity 100 Airlinks User Manual – Download [optimized]
Monster Clarity 100 Airlinks User Manual – Download

Leave a comment

Your email address will not be published.