MoFi Electronics MasterDeck Turntable User Guide

mofi-logo

MoFi Electronics MasterDeck Turntable

MoFi-Electronics-MasterDeck-Turntable-product

Specifications:

  • Model: TURNTABLE REPACKING GUIDE (v3)
  • Accessories: Platter belt, RCA cable, power supply, power cable, manual, accessories tubes

Product Usage Instructions

Packing Preparation:

Make sure all accessories are in foam top. Wrap turntable body and platter with supplied plastic bags before packing the box.

Prepare for Shipping:

Remove platter post by unscrewing the three screws holding it in place. Install platter strap and thumb screws. Lift platter from turntable, wrap it in the supplied plastic bag, and securely place it in the foam base.
Place masking tape over the cartridge guard to secure it in place. Remove the tonearm, wrap it in the supplied plastic bag, and securely place it in the foam top cutout.

FAQ:

  • Q: Can I use alternative packaging materials?
    A: It is recommended to use all of the original packaging materials to ensure safe transportation of the turntable.
  • Q: How do I secure the platter during shipping?
    A: Use the platter strap and thumb screws to secure the platter in place before packing it in the foam base.

REMOVE THE FOLLOWING ITEMS

  • Platter belt
  • Cables

MAKE SURE ALL ACCESSORIES ARE IN FOAM TOP

Platter belt, RCA cable, power supply, power cable, manual and accessories tubes

PREPARE FOR SHIPPING

MoFi-Electronics-MasterDeck-Turntable-fig- (1)

  1. Remove the platter post by removing the three screws holding it in place.
  2. Install platter strap and thumb screws. Lift the platter from the turntable and wrap the supplied plastic bag. Place the platter securely in the foam base.
  3. Place masking tape over the cartridge guard to hold it in place. Remove the tonearm and wrap in a supplied plastic bag. Place tonearm securely in foam top cutout.

PACK THE BOX

MoFi-Electronics-MasterDeck-Turntable-fig- (2)

  • A. Foam Top
  • B. Turntable
  • C. Foam Base
  • D. Inner Box
  • E. Outer Box

WARNING

  • Please use all of the original packaging
  • Wrap turntable body with supplied plastic bag before packing the box
  • Wrap platter with supplied plastic bag before packing the box

Documents / Resources

PDF thumbnailElectronics MasterDeck Turntable
User Guide · Electronics MasterDeck Turntable, MasterDeck Turntable, Turntable

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.