MOFAGE POCO Drop In Filter Adapter Instructions

Contents hide

The front end of this product is used to connect to the lens, The rear end is used to connect to the camera body.
To remove filter – Push the bottom to remove filet
To install filter – Insert filter into the socket on the side until it clicks.
Before using this product, please check the length of your lens insert to avoid damaging filter.
If you’re not sure about the length, please download the Test Card from the official website.
This product provides certain degree of sealing, but do not use this product in extreme conditions. toke extra protection if necessar
In case of stain or foreign object contamination on the filter, do not wipe it directly. Please use the correct cleaning tools and methods to avoid danmaging the filter.
Please install lens support when using heavy a lens to avoid damaging the adapter from the weight.
POCO produces extra optical pathway, so it’s necessary to use it with a clear filter.
When connecting focus motor and VND, please adjust focal length manually.
We recommend using focus motor torque of about 0.5 Nm to avoid damage to the linkage mechanism