SloanLED 100L1 24 VDC Power Supply - logo100L1 24 VDC тэжээлийн хангамж
Суулгацын зааварчилгаа

SloanLED 100L1 24 VDC Power Supply - figure 1 SloanLED 100L1 24 VDC Power Supply - figure 2
1. Шаардлагатай багаж хэрэгсэл: Утас тайлагч, өрөм, халив. 2. Supplies required: Conduit and electrical enclosure for power supply (if not placed in a sign made from enclosure rated material), #8 pan head screws, UL Listed PLTC cable, UL Listed electrical wire connectors (e.g., wire nuts), silicone. Europe: Electrical enclosure for power supply, M4 pan head screws, PLTC cable, silicone, 3M™  Scotchlok™ connectors.
SloanLED 100L1 24 VDC Power Supply - figure 3 SloanLED 100L1 24 VDC Power Supply - figure 4
3. Power Supply: Identify primary wires, secondary wires, and the location of mounting tabs. 4. Mount Power Supplies: Use mounting tab in the corner to secure power supply.
SloanLED 100L1 24 VDC Power Supply - figure 5
5. Connect Primary: CAUTION: Have a licensed electrician connect to the primary.

ТАЙЛБАР: Ensure adequate ventilation. Power supply operating ambient temperature is -40º to 55º C. Power supply must be mounted in an enclosure (i.e., the transformer can/raceway). Power supply spacing to thermoplastic, wood, fiber, or other combustible type enclosure materials shall be 1″ (25 mm). Two or more adjacent power supplies shall not be mounted closer than 1″ (25 mm) end to end or 4″ (102 mm) side to side.
If mounted inside a sign cabinet, UL requires that the cabinet is made from an enclosure-rated material. Ensure power supplies are not overloaded by verifying output current is less than 4.15 DC Amps. It is recommended to use photocells or light sensors to prolong the life of the power supply and to keep unit at maximum operating efficiency.


If the sign is not functioning properly, check the following:

  • Анхан шатны ботьtage is between 120-277 VAC
  • Secondary voltage is 24 VDC
  • Output current is 4.15 Amps or less
  • The power supply is not overloaded (see power supply capacity chart in product installation guide or
  • There are no shorts in the secondary wiring
  • All secondary connections are RED-TO-RED and BLACK-TO-BLACK

SloanLED products carry a limited warranty.
For complete details refer to the warranty policy found at SloanLED.comSloanLED 100L1 24 VDC Power Supply - iconҮзүүлсэн бүтээгдэхүүнүүдийн зарим эсвэл бүхэлд нь хүлээгдэж буй АНУ-ын болон гадаадын патентуудад хамрагдсан бөгөөд АНУ-д олгосон дараах патентуудын аль нэгэнд хамрагдсан болно:
6776504, 6969179, 7192157, 6932495, 7241031

SloanLED 100L1 24 VDC Power Supply - logoХарилцагчийн үйлчилгээ, техникийн дэмжлэг
SloanLED-ийн төв байр
5725 Оливас Парк Драйв, Вентура, Калифорниа, АНУ
888.747.4LED (888.747.4533) • [имэйлээр хамгаалагдсан]
P/N 402794 Илчлэлт А 2021-03-24
SloanLED Europe bv
Argonstraat 110, 2718 SN Zoetermeer, NL
+31 88 12 44 900 • [имэйлээр хамгаалагдсан]

Баримт бичиг / нөөц

SloanLED 100L1 24 VDC тэжээлийн хангамж [pdf] Суулгах гарын авлага
701895-100L1, 100L1 24 VDC тэжээлийн хангамж, 100L1, 24 VDC тэжээлийн хангамж

Сэтгэгдэл үлдээх

Таны и-мэйл хаяг хэвлэгдсэн байх болно.