1. Танилцуулга
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Figure 1: Procolored F13 Panda DTF Printer.
2. Аюулгүй байдлын мэдээлэл
Принтерийг гэмтээх, гэмтээхээс сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Принтерийг тогтвортой, тэгш гадаргуу дээр байрлуулсан эсэхийг шалгаарай.
- Connect the printer to a grounded power outlet with the correct voltage (AC 100-230V).
- Принтерийг ус эсвэл хэт чийгшилд бүү байлга.
- Ашиглалтын явцад гараа хөдөлж буй хэсгүүдээс хол байлга.
- Use only recommended inks and cleaning solutions.
- Хүүхдийн гар хүрэхгүй газар хадгална.
3. Багцын агуулга
Бүх зүйл багцад байгаа эсэхийг шалгана уу:
- Procolored F13 DTF Printer
- Roll Film 13"
- DTF Ink Set (CMYK+WW)
- Nozzle Protection Fluid
- DTF Powder
- Хуванцар дэмжлэг
- Өгөгдлийн кабель (USB)
- Цахилгаан кабель
- Moisturizing Device
- Хаягдал лонх
- Хайрцаг
- Spare Ink Tube
- Роллер хаалт
- Бэхний дэвсгэр
- Арчигч
- Таслагч ир
- USB Dongle
- Тариур
- Халив
- Roller Bar
- Өргөтгөх хоолой
- Needle Hub
- Хавар
- Арчдас
Figure 2: Included accessories for the Procolored F13 DTF Printer.
4. Тохируулах гарын авлага
4.1 Хайрцагнаас задлах, анхны байршуулах
Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.
Video 1: Procolored F13 DTF Printer Unboxing. This video demonstrates the unboxing process and initial setup steps for the printer.
4.2 Film Roll Installation
Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.
4.3 Ink System Setup
Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.
Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.
4.4 Power Connection and Software Installation
Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.
Зураг 4: Илүүview of the Procolored RIP software interface and available tutorials.
5. Ашиглалтын заавар
5.1 Preparing for Print
- Power on the printer using the main switch.
- Ensure the DTF film is correctly loaded and aligned.
- Open the Procolored RIP software on your computer.
- Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.
5.2 Хэвлэх үйл явц
Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.
Video 2: Procolored F13 DTF Printer in operation. This video demonstrates the printing process, including film feeding and ink application.
5.3 Хэвлэсний дараах
After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.
Зураг 5: Жишээ ньamples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.
6. Засвар үйлчилгээ
6.1 Автомат цэвэрлэгээний систем
The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.
6.2 White Ink Circulation
The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.
Video 3: F13 L1800 DTF Apparel Printer features. This video highlights the white ink circulation and automatic cleaning functions.
6.3 Ерөнхий цэвэрлэгээ
Принтерийн гадна талыг зөөлөн, d аргаар үе үе цэвэрлэж байгаарай.amp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.
7. Алдаа засах
Хэрэв та хэвлэгчтэйгээ холбоотой асуудалтай тулгарвал дараах нийтлэг шийдлүүдийг анхаарч үзээрэй.
- Хэвлэх чанарын асуудал: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
- Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
- Програм хангамжийн алдаа: Restart the software and the printer. Ensure your software and drivers are up to date.
- Холболтын асуудал: Verify USB cable connection and ensure the printer is powered on.
For persistent issues, contact Procolored customer service.
8. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Брэнд | Өнгөөр будсан |
| Загварын нэр | F13-XMJZ |
| Холболтын технологи | USB |
| Хэвлэлийн технологи | Бэхэн |
| Онцлог шинж чанар | Зөөврийн |
| Принтерийн гаралт | Өнгө |
| Хамгийн их хэвлэх хурд (өнгөт) | 1 ppm |
| Хамгийн их хэвлэх хурд Monochrome | 1 ppm |
| Бүтээгдэхүүний хэмжээ (D x W x H) | 16.53"D x 34.25"W x 16.4"H |
| Бэхний өнгө | Cyan, Magenta, Yellow, Black, White, Light Cyan |
| Шийдвэр | 1440 x 1440 dpi |
| Хамгийн их медиа хэмжээ | A3 (13 Inches) |
| Програм хангамжийн дэмжлэг | Windows 7/10/11 |
| Бүтээгдэхүүний тусгай хэрэглээ | Textile Printing |
9. Баталгаат хугацаа ба дэмжлэг
Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:
- Print Head and Related Components: Six-month warranty.
- Бусад хэрэгслүүд: Нэг жилийн баталгаа.
Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.