Танилцуулга
The BISSELL CrossWave Edge is a versatile multi-surface hard floor cleaner designed to vacuum and mop simultaneously. Featuring ZeroGap™ Technology for edge-to-edge cleaning and Tangle-Free Technology to minimize hair wrap, this appliance is engineered for efficient and effective cleaning of various sealed hard floors and area rugs. Its Two-Tank Technology ensures that clean water and solution are always kept separate from dirty water, providing a fresh clean every time.
Тохиргоо
Before first use, ensure all components are present and assembled correctly. The unit includes a clean water tank, a dirty water tank, a brush roll, and a storage/rinse tray.
- Цэвэр усны савыг дүүргэх: Remove the clean water tank from the back of the unit. Fill it with water up to the indicated 'Water' line. For enhanced cleaning, add the recommended BISSELL cleaning formula up to the 'Formula' line. Ensure the cap is securely fastened before reattaching the tank to the unit.
- Attaching the Brush Roll: Ensure the brush roll is properly seated in its compartment. The Tangle-Free brush roll is designed to reduce hair wrap.
- Эрчим хүчний холболт: Plug the power cord into a suitable electrical outlet. The CrossWave Edge is a corded electric appliance, providing consistent power during operation.


Video 1: Official CrossWave Edge Feature Video. This video provides a visual guide to the product's features, including aspects of setup and operation.
Ашиглалтын заавар
The CrossWave Edge is designed for efficient wet and dry cleaning on multiple sealed hard surfaces and area rugs.
- Асаах: Press the power button located on the handle to turn on the unit.
- Select Surface Mode: Choose between 'Hard Floor' or 'Area Rug' mode using the dedicated buttons on the handle. This optimizes the cleaning process for the specific surface.
- Тоос сорогч болон шүүр: Hold the solution spray trigger to dispense cleaning solution while pushing the unit forward to vacuum and mop. Release the trigger when pulling the unit back to allow for suction and drying.
- Ирмэг цэвэрлэх: Utilize the ZeroGap™ Technology by aligning the cleaner head along edges and baseboards to pick up debris close to the wall.
- Хоёр танкийн технологи: The separate clean and dirty water tanks ensure you are always cleaning with fresh solution. Monitor the dirty water tank and empty it when it reaches the 'Full' line.



Засвар үйлчилгээ
Regular maintenance ensures optimal performance and longevity of your CrossWave Edge.
- Өөрийгөө цэвэрлэх мөчлөг: After each use, place the unit on its storage/rinse tray. Activate the self-cleaning mode by pressing the dedicated button on the handle. This flushes debris from the brush roll and internal components.
- Бохир усны савыг хоослох, цэвэрлэх: Remove the dirty water tank and dispose of the contents. Rinse the tank thoroughly with water.
- Сойзны өнхрүүлгийг цэвэрлэх: Remove the brush roll from the cleaner head. Rinse it under running water to remove any hair or debris. Allow it to air dry completely before reinserting.
- Шүүлтүүрийн засвар үйлчилгээ: The Antimicrobial FreshStart™ Filter helps combat odors. Remove and rinse the filter regularly. Allow it to air dry completely before placing it back into the dirty water tank. Replace the filter as needed to maintain performance.

Алдааг олж засварлах
If you encounter issues with your CrossWave Edge, refer to the following common solutions:
- No Suction/Poor Performance: Check if the dirty water tank is full or improperly seated. Ensure the clean water tank has sufficient solution. Verify the brush roll is free of obstructions and properly installed. Clean the filter.
- Шалан дээрх зурааснууд: Та чөлөөтэй байгаа эсэхээ шалгаарайasing the spray trigger on the backward pass to allow for maximum suction. The brush roll may need cleaning or replacement.
- Odor from Unit: Thoroughly clean the dirty water tank, brush roll, and filter after each use. Ensure all components are completely dry before reassembling and storing.
For more detailed troubleshooting or persistent issues, please consult the full user manual or contact Bissell customer support.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Бисселл |
| Загварын нэр | CrossWave Edge |
| Загварын дугаар | 4111 А |
| Зүйлийн жин | 9.5 фунт |
| Бүтээгдэхүүний хэмжээс | 10.5 x 11.4 x 43.6 инч |
| Хүчин чадал | 620 миллилитр |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Оруулсан бүрэлдэхүүн хэсгүүд | Brushroll, Trial-size CrossWave Pet Pro Oxy Formula, Antimicrobial FreshStart Filter, Storage & Rinse Tray |
Баталгаат болон дэмжлэг
For detailed warranty information, please refer to the documentation included with your product or visit the official Bissell webсайт. Нэмэлт хамгаалалтын төлөвлөгөөг тусад нь худалдан авах боломжтой байж магадгүй.
For customer support, product registration, or to purchase replacement parts and cleaning formulas, please visit the Амазон дээрх Бисселл дэлгүүр or the official Bissell webсайт.