Acquaer Shallow Well Jet Pump (Model CCJC, 1HP) Instruction Manual

1. Танилцуулга

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Acquaer Shallow Well Jet Pump, Model CCJC. This 1HP electric motor pump is designed for wells up to 25 feet deep, providing strong suction and water flow. It is suitable for various applications including irrigation systems, sprinkler setups, gardens, and supplying water to homes or small farms.

Acquaer Shallow Well Jet Pump overview, highlighting its performance capabilities.

2. Аюулгүй байдлын мэдээлэл

Please read and understand all safety warnings and instructions before installing, operating, or performing maintenance on this pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• Насосыг засварлахаасаа өмнө үргэлж цахилгааныг нь салга.
• Цахилгаан цочролоос сэргийлэхийн тулд зөв газардуулга хийх.
• Do not operate the pump dry; always ensure it is primed with water before starting.
• Install the pump in a well-ventilated area, protected from freezing temperatures and direct sunlight.
• Суурилуулалт болон засвар үйлчилгээний явцад зохих хувийн хамгаалах хэрэгсэл (PPE) ашиглана уу.

3. Бүтээгдэхүүний онцлог

• Powerful 1HP Motor: Provides strong suction and high water flow, suitable for wells up to 25 feet deep.
• Хос ботьtage Operation (115V/230V): The pump motor is designed to operate safely on either 115V or 230V power supplies. It is factory-set for 230V.
• Автомат хэт халалтаас хамгаалах: An intelligent system automatically shuts off the pump if it runs out of water or the motor overheats, preventing damage and extending product life.
• Автомат даралтын унтраалга: Functions as a pressure booster, activating the pump when pressure drops below 20 PSI and deactivating it when pressure exceeds 40 PSI, ensuring consistent water supply. A pressure gauge is included on the casing for monitoring.
• Durable Cast Iron Volute: Constructed with a rugged cast iron casing for enhanced durability and reliable performance.

Key features including the capacitor motor, quality construction, and warranty information.

4. Бүрэлдэхүүн хэсгүүд дууссанview

Familiarize yourself with the main components of your Acquaer Shallow Well Jet Pump:

• Priming Port: Used to fill the pump with water before initial operation.
• 1" NPT Outlet: Connection point for the discharge pipe.
• 1-1/4" NPT Inlet: Connection point for the suction pipe from the well.
• Ботьtage Box: Contains the electrical connections and voltage сонгох шилжүүлэгч.
• Эрчим хүчний хайрцаг: Houses the motor's electrical components.
• Даралт хэмжигч: Одоогийн усны даралтыг харуулна.

5. Тохиргоо ба суурилуулалт

5.1. Ботьtage Сонголт

Your pump is factory-set to 230V. If your power supply is 115V, you must adjust the voltage switch before initial use. Refer to the diagram below:

• 115V-ийн үйл ажиллагааны хувьд: Ensure the switch is in the "115V" (down) position.
• 230V-ийн үйл ажиллагааны хувьд: Ensure the switch is in the "230V" (up) position.

CAUTION: Please select the correct voltage for the first time using to prevent damage to the pump.

5.2. Насосыг праймераар цэнэглэх

Before starting the pump for the first time or after it has been drained, it must be primed with water to ensure proper operation and prevent damage from dry running.

1. Алхам 1: Unscrew the priming port cap located on the top of the pump casing. Carefully pour water into the cavity until it is completely full.
2. Алхам 2: Once the cavity is fully filled with water, reinstall the priming port cap securely. The pump is now ready for startup.

6. Ашиглалтын заавар

The Acquaer Shallow Well Jet Pump features an automatic pressure switch for convenient operation. Once properly installed and primed, the pump will manage water pressure automatically.

• The pump will automatically start when the system pressure drops below 20 PSI.
• The pump will automatically shut off when the system pressure reaches or exceeds 40 PSI.
• Monitor the built-in pressure gauge to observe system pressure.
• Ensure a continuous water supply to the pump inlet to prevent dry running.

7. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны насосны урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.

• Өвөлжилт: In areas subject to freezing temperatures, drain the pump completely to prevent damage. Disconnect power, open drain plugs, and remove the priming cap to allow all water to escape.
• Холболтуудыг шалгах: Periodically check all pipe connections for leaks and tighten as necessary.
• Цэвэр агааржуулалт: Ensure motor cooling vents are free from debris to prevent overheating.
• Pressure Tank (if applicable): If used with a pressure tank, regularly check the air pressure in the tank, ensuring it is 2 PSI below the pump's cut-in pressure.

8. Алдаа засах

If you encounter issues with your pump, refer to the following common troubleshooting steps:

If problems persist, contact qualified service personnel.

9. Техникийн үзүүлэлтүүд

Detailed technical specifications for the Acquaer Shallow Well Jet Pump, Model CCJC:

10. Баталгаат хугацаа ба дэмжлэг

Your Acquaer Shallow Well Jet Pump comes with a 24-month warranty, ensuring peace of mind regarding product quality and performance.

• Баталгаат хугацаа: Худалдан авсан өдрөөс хойш 24 сар.
• Дэмжлэг: For technical assistance, warranty claims, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Acquaer webсайт.