Phanteks XT View Mid-Tower тоглоомын явах эд ангийн зааварчилгааны гарын авлага

1. Танилцуулга

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Гол онцлогууд:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Багцын агуулга

Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Зип зангиа (30х)
  • MB/SSD Screws (30x)
  • Эрхий эрэг (4х)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Тохиргоо ба суурилуулалт

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View явах эд анги.

3.1. Явах эд анги бэлтгэх

1. Баглаа задлах: Явах эд ангийг савлагаанаас нь болгоомжтой салга.
2. Самбарыг устгах: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Зураг 3.1: Дотоод засал view of the XT View chassis, ready for component installation.

3.2. Эх хавтанг суурилуулах

1. Зогсоогч суурилуулах: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Эх хавтанг байрлуулах: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Аюулгүй эх хавтан: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Цахилгаан хангамжийн нэгж (PSU) суурилуулах

1. Цахилгаан хангамжийн албан тушаал: PSU-г явах эд ангийн арын доод хэсэгт байрлах зориулалтын тасалгаанд шургуулна.
2. Аюулгүй цахилгаан хангамж: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Хадгалах диск суурилуулах

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5 инчийн хатуу диск: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Өргөтгөлийн карт (GPU) суурилуулах

1. Слотын тагийг арилгах: Явах эд ангийн ар талаас шаардлагатай тэлэлтийн үүрний тагийг ав.
2. Карт оруулах: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Хамгаалалтын карт: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Зураг 3.2: Арын доторлогоо view highlighting expansion slots and fan mounting points.

3.6. Сэнс болон Радиатор суурилуулах

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Дээд тал: 360 мм хүртэл.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Кабелийн менежмент

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Зураг 3.3: Ар талд view illustrating cable management space.

3.8. Урд талын оролт гаралтын холболтууд

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0 толгой
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Ашиглалтын заавар

4.1. Асаах/унтраах

дээр дарна уу Цахилгаан товч located on the top front panel to turn the system on or off.

4.2. Урд самбарын холболт

The front I/O panel provides convenient access to:

• 1x USB 3.0 порт
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Засвар үйлчилгээ

5.1. Тоосны шүүлтүүрийг цэвэрлэх

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Шүүлтүүрийг устгах: Gently slide out or unclip the dust filters.
2. Цэвэр: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Дахин суулгах: Place the clean, dry filters back into their positions.

5.2. Ерөнхий цэвэрлэгээ

Гаднах гадаргуугийн хувьд зөөлөн, d ашиглана ууamp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Алдаа засах

Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно.

6.1. Систем асахгүй байна

• Эрчим хүчний холболтууд: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Эх хавтангийн холболтууд: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Эх хавтанг синк хийх: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Товчлуурын функц: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Холболтууд: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Саад бэрхшээл: Сэнсний ирийг хааж буй кабель эсвэл эд зүйл байгаа эсэхийг шалгана уу.
• Тоос: Clean any dust buildup on fan blades.

7. Техникийн үзүүлэлтүүд

8. Дэмжлэг ба баталгаа

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webсайт:

www.phanteks.com

Refer to the Phanteks webтанай бүс нутагт хамаарах хамгийн сүүлийн үеийн баталгаат хугацааны нөхцөл, болзлыг сайтаас үзнэ үү.