Lexicon 1492GY-1

Lexicon Dade Queen Platform Bed (Model 1492GY-1) Instruction Manual

Contemporary Wood & Velvet Queen Platform Bed

1. Бүтээгдэхүүн дууссанview

The Lexicon Dade Queen Platform Bed is designed to offer a modern and versatile sleeping solution. This platform bed features a gray velvet fabric upholstered headboard with vertical channel-tufting, complemented by a brushed gray finish on the engineered wood frame, footboard, and rails. Its platform construction eliminates the need for a box spring.

Lexicon Dade Queen Platform Bed in a bedroom setting

Image 1.1: The Lexicon Dade Queen Platform Bed in a contemporary bedroom setting, showcasing its gray velvet headboard and wood frame.

2. Аюулгүй байдлын мэдээлэл

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product. Keep all small parts and packaging materials away from children. Assembly should be performed by at least two adults. Do not use power tools for assembly unless specifically instructed, as overtightening fasteners can cause damage. Ensure all connections are secure before use. Do not exceed the recommended weight capacity for the bed frame.

3. Багцын агуулга

Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, please contact customer support.

  • Толгойн тавцан (1)
  • Хөлийн тавцан (1)
  • Хажуугийн хашлага (2)
  • Support Slats (Multiple)
  • Center Support Legs (Multiple)
  • Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. Угсрах заавар

Зөв угсрахын тулд эдгээр алхмуудыг анхааралтай дагаж мөрдөнө үү. Орыг ашиглах өрөөнд угсрахыг зөвлөж байна.

  1. Савлах ба эд ангиудыг тодорхойлох: Бүх эд ангиудыг савлагаанаас болгоомжтой авч хая. Зураас үүсэхээс сэргийлж зөөлөн, цэвэр гадаргуу дээр тавь. Өгөгдсөн эд ангийн жагсаалтыг ашиглан эд анги бүрийг тодорхойл.
  2. Хажуугийн хашлагыг самбарын толгойд бэхлэх: Align the side rails with the pre-drilled holes on the headboard. Secure them using the appropriate bolts and washers from the hardware pack. Do not fully tighten bolts until all major components are connected.
  3. Хажуугийн хашлагыг хөлийн тавцан дээр бэхлэх: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all four corners are connected, gently tighten all bolts using the provided Allen wrench.
  4. Хажуу тал view of the Lexicon Dade Queen Platform Bed frame

    Зураг 4.1: Хажуу тал view of the bed frame, illustrating the connection points between the side rails, headboard, and footboard.

  5. Төвийн тулгуур хөлийг суурилуулах: Attach the center support legs to the designated crossbeams or support points on the side rails. Ensure they are firmly attached and provide stable support.
  6. Place Support Slats: Lay the wooden support slats across the bed frame, ensuring they are evenly spaced and secured to the side rails using the provided fasteners (if applicable). The slats provide the necessary support for your mattress.
  7. Өнцөгтэй view of the Lexicon Dade Queen Platform Bed frame with slats installed

    Зураг 4.2: Өнцөг view of the bed frame with the wooden support slats properly installed, ready for a mattress.

  8. Эцсийн чангаруулах: Double-check all bolts and fasteners to ensure they are fully tightened. Do not overtighten.

5. Хэрэглээ

This platform bed is designed to be used without a box spring. Simply place your queen-sized mattress directly onto the support slats. Ensure the mattress is centered and evenly distributed on the frame. Avoid jumping on the bed or placing excessive localized weight on any single point of the frame or slats.

6. Засвар үйлчилгээ

  • Хилэн бүрээсийг цэвэрлэх: Ерөнхий цэвэрлэгээнд зориулж хилэн даавууг зөөлөн тоос сорогчоор арчина. Асгарсан тохиолдолд цэвэрхэн, хуурай даавуугаар нэн даруй арчина. Зовлонтой толбо гарвал мэргэжлийн тавилга цэвэрлэгчтэй зөвлөлдөнө үү. Хүчтэй химийн бодисоос зайлсхий.
  • Cleaning Wood Frame: Модон хүрээг зөөлөн арчиж, damp cloth. Avoid abrasive cleaners or polishes that may damage the finish. Dry immediately with a clean cloth.
  • Техник хангамжийн шалгалт: Periodically check all bolts and fasteners to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
  • Нарны шууд тусгалаас зайлсхийх: Prolonged exposure to direct sunlight can cause fading of the velvet fabric and wood finish.
Close-up image showing the gray velvet fabric and brushed gray wood finish

Image 6.1: Close-up detail of the gray velvet fabric and the brushed gray wood finish, illustrating the textures for cleaning reference.

7. Алдаа засах

  • Чичигнэх чимээ: If the bed squeaks, check all bolts and connections. Tighten any loose hardware. Ensure the center support legs are firmly on the floor and evenly supporting the frame.
  • Тогтворгүй хүрээ: If the bed feels wobbly, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
  • Гэмтсэн хэсгүүд: If any part is damaged during assembly or use, discontinue use and contact customer support for replacement parts.

8. Техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
Загварын дугаар1492GY-1
ХэмжээХатан хэмжээ
Бүтээгдэхүүний хэмжээ (L x W x H)91" x 63" x 48"
Толгойн тавцангийн өндөр48"
Хөлний тавцангийн өндөр14"
Бүтээгдэхүүний жин84.5 фунт
МатериалEngineered wood, Velvet fabric, Solid wood
ДуусгаBrushed Gray
ӨнгөСаарал
Угсрах шаардлагатайТиймээ
Хайрцагны пүрш шаардлагатайҮгүй
Diagram showing the dimensions of the Lexicon Dade Queen Platform Bed: 91 inches length, 63 inches width, and 48 inches height.

Image 8.1: Dimensional diagram of the Lexicon Dade Queen Platform Bed.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and customer support, please refer to the product description on the store page or contact Lexicon customer service directly. You can visit the official Lexicon store for more details: Lexicon Store.

© 2026 Lexicon. Бүх эрх хуулиар хамгаалагдсан.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.