1. Танилцуулга
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 Air Solenoid Valve. Please read this manual thoroughly before using the product to ensure proper function and to prevent potential hazards.
2. Аюулгүй байдлын мэдээлэл
Always adhere to local safety regulations and general engineering practices when working with pneumatic components. Failure to follow these instructions may result in injury or damage to the equipment.
- Ensure the system is depressurized and de-energized before installation, maintenance, or repair.
- Only qualified personnel should install, operate, and maintain this valve.
- Do not exceed the specified operating pressure or voltage.
- Protect the valve from contamination, moisture, and extreme temperatures.
- Тохиромжтой хувийн хамгаалалтын хэрэгслийг (PPE) ашиглах.
3. Бүтээгдэхүүн дууссанview
The FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 is a high-performance air solenoid valve designed for precise control in pneumatic systems. It features a compact design and robust construction for reliable operation.
Зураг 3.1: Изометр view of the FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 Air Solenoid Valve, showing its compact design with two black solenoid coils mounted on a silver-colored valve body. The coils have electrical connections and blue indicator dots.
Зураг 3.2: Урд view of the FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 Air Solenoid Valve, highlighting the two black solenoid coils with their electrical terminals extending upwards. The silver valve body is visible between and below the coils.
Зураг 3.3: Хажуу талын мэргэжлийнfile view of one end of the FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 Air Solenoid Valve, showing the black solenoid coil and the mounting screws on the side of the valve body.
4. Тохиргоо ба суурилуулалт
Proper installation is crucial for the valve's performance and longevity. This valve is designed for mounting on a sub-base.
4.1 Суурилуулалт
- Суурилуулах гадаргуу нь цэвэр, тэгш байх ёстой.
- Mount the valve securely onto the designated sub-base. The maximum tightening torque for valve mounting is 2 Нм.
- The valve can be mounted in ямар ч албан тушаал.
4.2 Пневматик холболт
- Connect pneumatic lines to the G1/4 ports on the sub-base, ensuring all connections are tight and leak-free.
- The pneumatic working port is G1/4, compatible with sub-bases of size 26 mm as per ISO 15407-1 and Size 01 as per VDMA 24563.
- Auxiliary pilot air ports 12 and 14 are also sub-base, size 26 mm as per ISO 15407-1.
- Pilot exhaust air ports 82/84 can be ducted or not ducted as per standard.
4.3 Цахилгааны холболтууд
- Connect the electrical supply to the solenoid coils. The electrical connection is Form C as per DIN EN 175301-803, without PE conductor.
- Үйл ажиллагааны ботьtage байна 24V хувьсах гүйдэл.
- Ensure the power supply matches the valve's specifications (24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA).
- Зөвшөөрөгдөх ботьtage fluctuations are -15% / +10%.
5. Ашиглалтын заавар
The VSVA-B-T32U-AZH-A1-1AC1 is a 2x3/2, open, monostable, pilot-controlled valve with electrical actuation.
- Үйлдэл: The valve is actuated electrically. Applying the specified voltage to the solenoid coil will shift the valve position.
- Дахин тохируулах арга: The valve resets via a pneumatic spring when the electrical signal is removed.
- Гараар хүчингүй болгох: A non-detenting manual override is available for testing or emergency situations.
- Signal Status Display: An LED indicator provides visual confirmation of the valve's signal status.
- Үйл ажиллагааны орчин: Use compressed air as per ISO 8573-1:2010 [7:4:4]. Operation with oil lubrication is possible (required for further use).
6. Засвар үйлчилгээ
Regular maintenance ensures optimal performance and extends the lifespan of the valve.
- Шалгалт: Periodically inspect the valve and connections for leaks, damage, or wear.
- Цэвэрлэгээ: Keep the valve and surrounding area clean. Avoid using harsh chemicals that could damage the housing or seals.
- Агаарын чанар: Ensure the compressed air supply meets the specified quality standards to prevent internal contamination.
- Солих: If any part of the valve is damaged or worn, replace it with genuine FESTO spare parts.
7. Алдаа засах
Нийтлэг асуудлууд болон тэдгээрийн боломжит шийдлүүдийг доорх хүснэгтээс харна уу.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хавхлага солигддоггүй | No electrical signal; Incorrect voltage; Low pilot pressure; Contamination | Check electrical connections and power supply; Verify pilot pressure (3-10 bar); Check air quality and clean if necessary. |
| Агаарын нэвчилт | Loose pneumatic connections; Damaged seals | Tighten connections; Inspect and replace seals if damaged. |
| Удаан хариу үйлдэл | Low operating pressure; Contamination; Incorrect pilot air supply | Verify operating pressure (2-10 bar); Check air quality; Ensure pilot air supply is external and correct. |
8. Техникийн үзүүлэлтүүд
Detailed technical data for the FESTO VSVA-B-T32U-AZH-A1-1AC1 547110 Air Solenoid Valve.
| Параметр | Үнэ цэнэ |
|---|---|
| Хавхлагын функц | 2x3/2, open, monostable |
| Тойрог | Давхцах |
| Үйлдлийн төрөл | Цахилгаан |
| Хавхлагын хэмжээ | 26 мм |
| Standard nominal flow rate | 900 л/мин |
| Pneumatic working port | G1/4, Sub-base, size 26 mm as per ISO 15407-1, Size 01 sub-base as per VDMA 24563 |
| Үйл ажиллагааны ботьtage | 24V хувьсах гүйдэл |
| Ашиглалтын даралт | 2 bar ... 10 bar |
| Дизайн | Piston gate valve |
| Дахин тохируулах арга | Пневматик пүрш |
| Хамгаалалтын зэрэг | IP65, ОБЕГ 4 |
| Нэрлэсэн өргөн | 9 мм |
| Код оруулна уу | VSVA |
| Exhaust air function | With flow control option |
| Битүүмжлэх зарчим | Зөөлөн |
| Суурилуулах байрлал | Ямар ч |
| Стандартад нийцсэн | VDMA 24563, ISO 15407-1 |
| Гараар дарах | Non-detenting |
| Хяналтын төрөл | Pilot-controlled |
| Pilot air supply port | Гадаад |
| Урсгалын чиглэл | Буцах боломжгүй |
| Тэмдэг | 00991819 |
| Signal status display | LED |
| Нисгэгчдийн даралт | 3 bar ... 10 bar |
| Flow rate of pneumatic valve | 1250 л/мин |
| Flow rate of pneumatic valve on individual sub-base | 1000 л/мин |
| Optimized flow rate of pneumatic valve pneumatically concatenated flow | 900 л/мин |
| Унтраах цаг | 28 мс |
| On switching time | 20 мс |
| Ажлын мөчлөг | 100% |
| Coil characteristics | 24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA |
| Зөвшөөрөгдөх ботьtage хэлбэлзэл | -15 % / +10 % |
| Үйл ажиллагааны дунд | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Чичиргээний эсэргүүцэл | Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 |
| Цочролын эсэргүүцэл | Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class (CRC) | 0 - No corrosion stress |
| Дунд зэргийн температур | -5 °C ... 50 °C |
| Агаарын харьцангуй чийгшил | 0 - 90 % |
| Дуу чимээний түвшин | 85 дБ(А) |
| Pilot medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Орчны температур | -5 °C ... 50 °C |
| Max. tightening torque for valve mounting | 2 Нм |
| Бүтээгдэхүүний жин | 305 гр |
| Цахилгааны холболт | Form C as per DIN EN 175301-803, Without PE conductor |
| Холболтын төрөл | On sub-base |
| Auxiliary pilot air port 12 | Sub-base, size 26 mm as per ISO 15407-1 |
| Auxiliary pilot air port 14 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pilot exhaust air port 82/84 | Not ducted as per standard, Ducted |
| Pneumatic connection 1 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pneumatic connection 2 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pneumatic connection 3 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pneumatic connection 4 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pneumatic connection 5 | Sub-base, size 26 mm as per ISO 15407-1 |
| Pilot interface | as per ISO 15218 |
| Материалын талаархи тэмдэглэл | RoHS-тэй нийцдэг |
| Seals material | HNBR, NBR |
| Орон сууцны материал | Цутгамал хөнгөн цагаан |
| Material of screws | Ган, цайрдсан |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries, please contact your FESTO distributor or visit the official FESTO website. Ensure you have your product model number (VSVA-B-T32U-AZH-A1-1AC1) and manufacturer part number (547110) available when seeking support.