Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Танилцуулга

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Бүтээгдэхүүний онцлог

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Хөдөлгөөнгүй ажиллагаа: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Хамгаалалтын батерейны тасалгаа: Includes an optional screw to secure the battery cover, preventing accidental opening.

Тохиргоо

1. Батерейг суурилуулах

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Удирдлагын ар талд байгаа зайны тасалгааг олоорой.
  2. Зайны тагийг доош гулсуулж нээнэ үү.
  3. Хоёр AAA батерейг оруулаад зөв туйлшралыг (+ ба -) баталгаажуулна уу.
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Буцах view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Ашиглалтын заавар

Урд view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Зураг: Урд view of the Anderic RRLC16.2 remote control.

  • Асаах товч (): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Буцах товчлуур (): Өмнөх дэлгэц эсвэл цэс рүү буцна.
  • Гэрийн товчлуур (): Roku-н үндсэн дэлгэц рүү буцна.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Тоглуулах/түр зогсоох, буцаах, хурдан урагшлуулах: Standard media control buttons for content playback.
  • Хураангуй түлхүүрүүд: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Тохиромжтой байдал

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review доорх нийцтэй байдлын дэлгэрэнгүй мэдээлэл:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. -г удаан дар (Гэр) ба (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Бусад түлхүүрүүдийг сурахын тулд 2-4 алхамыг давтана уу.
  6. дарна уу (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Үйлдвэрийн анхны төлөв рүү дахин тохируулах

Дарж удаан дарна уу (Гэр) ба (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Бүх сурсан түлхүүрүүдийг устгана уу

Дарж удаан дарна уу (Гэр) ба (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Үзүүлэлтүүд

Бүтээгдэхүүний хэмжээс 5.75 x 1.75 x 1 инч
Зүйлийн жин 1.76 унц
Загварын дугаар RRLC16.2
Батерей 2 AAA батерей шаардлагатай
Брэнд Андерик
Онцлог шинж чанар Бүх нийтийн
Өнгө Хар
Дэмжигдсэн төхөөрөмжүүдийн хамгийн их тоо 2
Тохиромжтой төхөөрөмжүүд Streaming Device, Television

Алдааг олж засварлах

  • Алсын удирдлага хариу өгөхгүй байна: Батерейг зөв суулгаж, дуусаагүй эсэхийг шалгаарай. Шаардлагатай бол солино.
  • Харааны шугам: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Буруу функциональ байдал: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Товчлуурын товчлуурууд ажиллахгүй байна: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Баталгаат болон дэмжлэг

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webсайт эсвэл харилцагчийн үйлчилгээтэй холбогдоно уу. Баталгаат зарга авахын тулд худалдан авалтын баримтаа хадгална уу.

Anderic is a registered trademark of Dan's Electronics Etc., Inc. All Rights Reserved. We are not affiliated with Roku. Roku is a registered trademark of Roku Inc.

Тусламж авахыг хүсвэл зочилно уу: www.anderic.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.