Introduction
This manual provides essential information for setting up, operating, and maintaining your HP EliteDisplay E273 27-inch LED-Lit Monitor. Please read these instructions carefully to ensure proper use and to maximize the performance and lifespan of your device. This monitor is designed for optimal viewing, productivity, and ergonomics, featuring a 3-sided micro-edge bezel and 4-way adjustability.
1. Setup
1.1 Unpacking the Monitor
Carefully remove all components from the packaging. Ensure all included items are present:
- HP EliteDisplay E273 27-inch LED-Backlit LCD Monitor
- Monitor Stand (Base and Riser)
- Power Cord
- VGA Cable
- DisplayPort Cable
- USB 3.0 to USB 3.0 Type B Cable
1.2 Attaching the Stand
- Place the monitor face down on a soft, clean surface to prevent scratches.
- Attach the riser to the back of the monitor panel, ensuring it clicks securely into place.
- Attach the base to the riser and tighten the thumb screw at the bottom of the base.
1.3 Connecting Cables
Connect the necessary cables to your monitor and computer:
- Power: Connect the power cord to the monitor's power input and then to a grounded electrical outlet.
- Video: Connect one end of the DisplayPort, HDMI, or VGA cable to the corresponding port on the monitor and the other end to your computer's video output port. Use only one video connection.
- USB: Connect the USB 3.0 Type B cable from the monitor's upstream USB port to an available USB 3.0 port on your computer to enable the monitor's USB hub functionality.
1.4 Initial Power-On
Press the power button on the monitor. The monitor should display an image from your connected computer. If no image appears, ensure all cables are securely connected and the computer is powered on.
Image: Front view of the HP EliteDisplay E273 27-inch monitor with its adjustable stand.
Video: A 360-degree view of the HP EliteDisplay E273 monitor, showcasing its design and adjustable stand features.
2. Operating the Monitor
2.1 Adjusting the Display
The HP EliteDisplay E273 offers versatile adjustments for ergonomic comfort:
- Height Adjustment: Gently push or pull the monitor panel up or down along the stand riser to achieve your desired viewing height.
- Tilt Adjustment: Hold the top and bottom edges of the monitor panel and gently tilt it forward or backward.
- Swivel Adjustment: Rotate the monitor panel left or right on its base.
- Pivot Adjustment: The monitor can pivot from landscape to portrait orientation. Before pivoting, ensure the monitor is at its maximum height and tilted back to avoid contact with the desk surface.
2.2 On-Screen Display (OSD) Menu
Use the buttons on the monitor's bezel to access and navigate the OSD menu. This menu allows you to adjust various display settings such as brightness, contrast, color temperature, input source, and more.
- Press the Menu button to open the OSD.
- Use the navigation buttons to scroll through options.
- Press the Select button to confirm a selection.
- Press the Exit button to close the OSD.
2.3 Input Selection
If you have multiple devices connected to the monitor, you can switch between input sources using the OSD menu or a dedicated input selection button (if available) on the monitor's bezel.
3. Maintenance
3.1 Cleaning the Monitor
To maintain the clarity and appearance of your monitor:
- Always power off the monitor and unplug it from the power outlet before cleaning.
- Use a soft, lint-free cloth lightly dampened with water or a non-abrasive screen cleaner.
- Do not spray cleaner directly onto the screen. Apply it to the cloth first.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the screen or casing.
4. Troubleshooting
If you encounter issues with your monitor, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| No image on screen | Ensure the power cable is securely connected and the monitor is powered on. Verify the video cable is connected to both the monitor and the computer. Check if the correct input source is selected via the OSD menu. |
| Image is dim or too bright | Adjust the brightness and contrast settings through the OSD menu. |
| Fuzzy or blurry image | Ensure the display resolution on your computer is set to the monitor's native resolution (1920 x 1080). Check the video cable for secure connection and damage. |
| USB ports not working | Verify that the USB 3.0 Type B upstream cable is connected from the monitor to your computer. Ensure your computer's USB drivers are up to date. |
5. Specifications
| Feature | Detail |
|---|---|
| Brand | HP |
| Model Number | 1FH50A8#ABA |
| Model Name | E273 |
| Screen Size | 27 inches |
| Display Type | LED-Backlit LCD, IPS Panel |
| Resolution | 1920 x 1080 (FHD 1080i) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Response Time | 5 milliseconds |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178 degrees |
| Connectivity | DisplayPort, HDMI, USB 3.0 (2 ports), VGA |
| Dimensions (D x W x H) | 2"D x 27.6"W x 20.6"H |
| Weight | 15.5 pounds |
| Color | Black/Silver |
| Mounting Type | Wall Mount |
| Included Components | LED-backlit LCD monitor, VGA cable, DisplayPort cable, USB 3.0 to USB 3.0 type B cable |
6. Warranty Information
This HP EliteDisplay E273 monitor comes with a 3 years limited warranty. For detailed terms and conditions, please refer to the warranty documentation included with your product or visit the official HP support website.
7. Support
For further assistance, technical support, or to download the latest drivers and software, please visit the official HP support website:
You may also find helpful resources and FAQs on the HP website.