Butane Gas Injector Nozzle Set for IKEA Hob

Бүтээгдэхүүн дууссанview

This Butane Gas Injector Nozzle Set (Model 481231039115) is a replacement part designed for various gas hobs, primarily compatible with IKEA, Whirlpool, and Ignis models. It is crucial to verify compatibility with your specific appliance model before installation.

Image: Four brass-colored gas injector nozzles, each with a small central hole and a threaded base, arranged diagonally on a white background. These nozzles are essential components for regulating gas flow in a hob.

Тохиромжтой байдал

This injector nozzle set is compatible with a wide range of gas hob models from IKEA, Whirlpool, and Ignis. Please refer to the detailed list below to ensure compatibility with your appliance. If your model is not listed or you are unsure, please contact customer service for assistance.

Compatible with IKEA:

This set is specifically designed for IKEA gas hobs.

Compatible with Whirlpool Models:

• 90125091 - 854175929611, 857126844500
• AKM268IX - 857126810501
• AKM200/TF - 857120029520
• AKM 202/WH - 857120229530
• AKM 202/NB - 857120229540
• AKM 202/TF - 857120229550
• AKM 212/WH/01 - 857121229540
• AKM 212/NA/01 - 857121229560
• AKM 217/NA - 857121729500
• AKM 217/IX - 857121729510
• AKM 232/WH - 857123220510
• AKM 235 IX - 857123538500
• AKM 242/IX - 8571242200530
• AKM 253/IX - 857125338500
• AKM 260/WH - F091828, 857126029510
• AKM 260/NB - F091829
• AKM 260/JA/01 GAS HOBS WP - 8557126038590
• AKM 260/NA/01 - 857126038600
• AKM 260/AE/01 - 857126038610
• AKM 265/NA - 857126538500
• AKM 521/WH/01 - 8571521229530
• AKM 521/NB/01 - 857152129540
• AKM 521/IX/01 - 857152129550
• AKM 526/AE - 857152638530
• AKM 526/JA - 85715263855020
• AKM 526/IR - 857152638540
• AKM 526/NA/C - 857152638510
• AKM 528/NA - 857152829500
• AKM 529/NA/C - 857152920500
• AKM260/IX/01 - F091827
• AKM 226 IX - F093485
• AKM 260/IX - F093497, 8571260805000
• AKM 232/IX - F093561
• AKM 519/WH - 857151929500
• AKM 519/NB - 857151929510
• AKM 519/IX - 857151929520
• AKM 546/IX - 857154638500
• AKM 533/IX - F091856
• AKM 528/JA - 857152829510
• AKM 520/IX/01 - 857152038520
• AKM524/IX - 857152438500
• AKM 260/NB - F093570
• AKM200IX - 857120020540, 857120029530
• AKM202IX - 857120220540, 857120229560
• AKM232IX - 857123220500
• AKM250IX - 857125035500
• AKM260IX - 857126029500
• AKM260NB - 857126029520

Compatible with IGNIS Models:

• AKL 701/IX - 854170138500
• AKL 701/WH - 854170138510
• AKL 701/NB - 854170138520
• AKL 710 TF GAS HOBS IG - 854171038530
• AKL 710/NA - 854171038550
• AKL 710/JA - 854171038560
• AKL 710/AE - 854171038570
• AKS 327/IX - 857932738500
• AKS 339/IX - 857933938500
• AKS 370/IX - ...

Суулгах гарын авлага

Аюулгүй байдлын чухал мэдэгдэл: Installation of gas appliance parts should only be performed by a qualified and certified technician. Improper installation can lead to gas leaks, fire, explosion, or serious injury. Always ensure the gas supply is turned off before beginning any work.

1. Бэлтгэл: Ensure the gas supply to the hob is completely shut off. Disconnect the appliance from the power supply if it has an electric ignition.
2. Access the Burners: Carefully remove the hob grates, burner caps, and burner crowns to expose the gas injectors.
3. Remove Old Injectors: Using an appropriate wrench, carefully unscrew the old gas injectors. Be gentle to avoid damaging the threads.
4. Install New Injectors: Screw the new butane gas injector nozzles into place. Ensure they are tightened securely but do not overtighten, as this can strip the threads.
5. Дахин угсрах: Replace the burner crowns, caps, and grates.
6. Битүүмжлэх туршилт: After installation, slowly turn the gas supply back on. Apply a soapy water solution to the newly installed injectors and connections. Look for bubbles, which indicate a gas leak. If bubbles appear, turn off the gas immediately and re-tighten the connections. Repeat the test until no bubbles are present.
7. Үйл ажиллагааны тест: Once no leaks are detected, carefully turn on the hob burners to ensure proper ignition and flame appearance.

Үйл ажиллагааны зарчим

Gas injector nozzles are critical components in a gas hob's burner system. They are precisely engineered to regulate the flow of gas from the manifold to the burner. The size of the orifice in the nozzle determines the amount of gas that can pass through, which in turn affects the flame size and heat output. Using the correct type of nozzle (e.g., butane, propane, natural gas) and the correct orifice size is essential for safe and efficient operation of your gas hob.

Засвар үйлчилгээ

Proper maintenance of your gas hob, including the injector nozzles, ensures safe and efficient operation. While the nozzles themselves require minimal direct maintenance, regular cleaning of the burner area is recommended.

• Тогтмол цэвэрлэгээ: Keep the burner caps and crowns clean from food spills and debris. Blockages can affect flame quality.
• Flame Inspection: Periodically observe the flame on each burner. A healthy gas flame should be predominantly blue with a small, stable inner cone. Yellow or orange flames, or flames that lift off the burner, may indicate an issue with gas-air mixture, potentially due to a partially blocked nozzle or burner.
• Мэргэжлийн хяналт: It is advisable to have your gas appliance inspected by a qualified technician periodically to ensure all components, including injectors, are functioning correctly and safely.

Алдааг олж засварлах

If you experience issues with your gas hob after replacing the injector nozzles, consider the following common problems and solutions. Always ensure the gas supply is off before inspecting or attempting repairs. If you are unsure, contact a qualified technician.

• No Gas Flow / Weak Flame:
  • Хийн хангамжийг шалгах: Ensure the main gas valve to the hob is fully open.
  • Incorrect Nozzle: Verify that the correct type of nozzle (butane) and the correct orifice size for your hob and gas type have been installed.
  • Блоклогдсон цорго: Although new, a nozzle could be partially blocked. Carefully remove and inspect.
• Yellow/Orange Flame or Sooting:
  • Incorrect Nozzle: The nozzle size might be too large for the gas type, leading to incomplete combustion.
  • Insufficient Air: Ensure the burner and air inlets are clean and unobstructed.
• Хийн үнэр:
  • Шууд арга хэмжээ: Turn off the gas supply immediately, open windows, and do not operate any electrical switches. Evacuate the area and contact your gas provider or a qualified technician.
  • Битүүмжлэх туршилт: Re-perform the soapy water leak test on all connections.

Үзүүлэлтүүд

Note: Some specifications from the source data (e.g., defrost system, batteries, cooling method) are not applicable to this product (gas injector nozzles) and have been omitted.

Дэмжлэг ба холбоо барих

For further assistance, compatibility inquiries, or technical support, please contact our customer service. We are a specialist in household appliance spare parts since 1984.

Please refer to your purchase documentation or the seller's information for direct contact details.