Road Commander System Monitor Module

Part Number: 00-01097-000

Document Revision: 53-01097-001 Rev C 1/31/24

Description

The Road Commander System Monitor Module provides real-time feedback on vehicle health and status. It is capable of reading up to four battery banks and four tank levels. This module is not a standalone device; information is transmitted across the network to be displayed on a mobile device or LCD display. These display devices can be assigned to specify which battery and tank each input is tied to. Blue, Gray, and Black tanks are supported by the System Monitor module. Multiple modules can be used in a system if necessary, allowing for a dynamic number of tanks and batteries or for ease of installation.

The system monitor is used in conjunction with the Wireless Communications module to communicate information to a SMART device. The module is internally protected from over-current situations. More specific applications and installation information are available in the service manual for this module. There are no serviceable parts within the System Monitor module. If the module is deemed defective, it must be replaced. Disassembly of the module voids the warranty.

Diagram Description: Typical Arrangement – 2 Battery Banks, 3 Tanks

The diagram illustrates the typical arrangement of the Road Commander System Monitor Module within a vehicle's electrical system. It depicts the module receiving regulated "Vehicle DC Power" via a "V Reg" and processed by a "μP" (microprocessor). The module interfaces with "Battery Inputs" (capable of monitoring up to two battery banks, labeled Battery 1 and Battery 2) and "Tank Inputs" (designed to monitor up to four tanks, specifically mentioning Blue, Gray, and Black tanks). Information gathered by the module is transmitted through the "Road Commander Network" and "Wireless Communications" to a "Smart Phone" or a "Touchscreen" display, enabling real-time feedback on vehicle health and status.

Product Features

Specifications

Environmental Specifications

Operating temp:-40/50 deg C (-40/122 deg F)
Storage temp:-40/125 deg C (-40/260 deg F)
Intrusion Rating:None
Agency approvals:None

Electrical Specifications

ParameterUnitMinTypMax
Operating supply voltageV101220
Reverse supply voltageV-36
Quiescent Current DrawmA50
Control Current (Per Output)A00.2
Control Circuit VoltageV101220
Logic Input VoltageV01220

Mechanical Specifications

ParameterUnitValue
Housing: L x W x HInch5 x 2 x 1.2
mm125 x 51.3 x 24.9
Module Weight:ounces5
grams136

Harness Information

Harness TypePart Number
Configurator Adapter Harness11-01097-006
6-way Wiring Pig-tail (J1)11-01095-106
8-way Wiring Pig-tail (J3)11-01095-108

Connectors

J3, 8-way Molex Mini-Fit Jr.

J1, 6-way Molex Mini-Fit Jr.

Available Product Literature and Guides

Available Accessory Items and Kits

Contact Information

Website: www.intellitec.com

Intellitec Products, LLC

1485 Jacobs Road, DeLand Florida, USA 32724

Phone: (386) 738-7307

53-01097-001-Prod-Spec-Road-Commander-System-Monitor John Colletti Adobe PDF Library 23.8.246

Related Documents

Preview Intellitec Road Commander Mega Module Product Specification
Detailed product specification for the Intellitec Road Commander Mega Module, covering features, electrical and mechanical specifications, environmental data, and connector pinouts. This module offers comprehensive control for RV systems.
Preview Intellitec Bi-Directional Isolator Relay Delay (B.I.R.D.) Installation Guide
Installation guide for the Intellitec Bi-Directional Isolator Relay Delay (B.I.R.D.) part number 00-01136-000. This document provides instructions for installing the B.I.R.D. unit, including wiring diagrams, connection types, and operational verification.
Preview Intellitec Battery Guard 1000 (RV-C) Installation Guide
Installation guide for the Intellitec Battery Guard 1000 (RV-C), detailing setup, wiring, and operation for RV electrical systems. Includes connection diagrams, specifications, and contact information.
Preview Intellitec Command Center: Advanced RV Electronic Control Panel Specifications
Detailed specifications and features of the Intellitec Command Center, an advanced and economical electronic control panel designed for RVs, offering comprehensive monitoring and control capabilities for slide-outs, accessories, generators, tanks, and batteries.