EASYmaxx Wellness Shower Head

Welcome

We are delighted that you have chosen this EASYmaxx wellness shower head. If you have any questions about the product, contact the customer service department via our website: www.ds-group.de/kundenservice

Intended Use

• This product is intended to be used as a shower head on shower hoses with a 1/2" IG internal thread.
• The product is designed for personal use only and is not intended for commercial applications.
• Use the product only for the intended purpose and as described in the operating instructions. Any other use is deemed to be improper.

The warranty does not cover faults caused by incorrect installation, handling, damage, calcification or attempted repairs. This also applies to normal wear and tear.

Safety Notices

• Keep the packaging material and mineral beads away from young children and animals. There is a danger of suffocation!
• Do not make any modifications to the product.
• Before you use the product, make sure that it has been connected correctly.
• The product is not a toy! Supervise children to ensure that they do not play with the product. There is a danger of scalding!
• Protect the product from fire and impacts.

Items Supplied

• 1 x shower head with mineral beads
• 1 x operating instructions

Check the items supplied for completeness and the components for transport damage. If you find any damage, do not use the product but contact customer service. Remove any possible films, stickers or transport protection from the product.

At a Glance

Product Components (Diagram A)

• 1 Rocker switch for water jet mode
• 2 Head
• 3 Thread
• 4 Mineral beads
• 5 Stainless steel plate with nozzles
• 6 Ring

Water Jet Modes (Diagram B)

• 7 Massage
• 8 Wellness
• 9 Rain shower

Product Data

Installation and Use

Please Note!

• Do not apply any force during installation and cleaning or when replacing the mineral beads! The shower head could be damaged.
• Tighten the screw connections hand-tight.
• Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the product! These may damage the surfaces.

1. Screw the thread of the shower head (3) as far as it will go into the thread of the shower hose (see Diagram C for connection).
2. Connect the shower hose to the water pipe.
3. Open the tap.

Setting Water Jet Mode

The shower head has three water jet modes (see Diagram B). To change the water jet mode, press the rocker switch (1) on the side of the shower head.

Cleaning the Shower Head

Clean the shower head and descale the nozzles at least every three weeks or when the nozzles are clogged.

• Clean the shower head with standard cleaning agent and a damp cloth or sponge.
• To descale the nozzles, the ring (6) on the head (2) can be unscrewed and the stainless steel plate (5) with seal ring can be removed (see Diagram D for removal). When you assemble them, make sure that the stainless steel plate and the seal are inserted correctly.

Disposal

Dispose of the packaging material in an environmentally friendly manner so that it can be recycled. Dispose of the product in an environmentally friendly manner as well.

Contact Information

DS Produkte GmbH

Am Heisterbusch 1
19258 Gallin, Germany

Phone: +49 38851 314650

*Calls to German landlines are subject to your provider’s charges.