GameSir G7 SE Wired Controller for Xbox

Package Contents

• GameSir-G7 SE *1
• 3m USB-C Cable *1
• User Manual *1
• Thank You & After-sale Service Card *1
• GameSir Sticker *1
• Certification *1

Requirements

Xbox One / Xbox Series X|S / PC (Win 10 or above) with USB port

Device Layout

The controller features a symmetrical design with two analog joysticks, a D-pad, ABXY buttons, View, Menu, and Xbox buttons. On the top shoulders are LB/RB bumpers and LT/RT triggers. A USB-C port is located at the top center. Additionally, there are two mappable rear buttons (R4/L4 Quick-Latch) and a 3.5mm audio jack with a microphone mute button. An indicator light displays connection status.

Connection Indicator

Solid White = Connected

Solid Red = Microphone Mute

Volume Control

1. Master Volume: Hold M + D-pad Up/Down to increase/decrease master volume (10 levels). A beep indicates min/max level.
2. Game/Chat Volume Balance: Hold M + D-pad Left/Right to increase game volume while decreasing voice chat volume, or vice versa. A beep indicates min/mid/max level.

Microphone Mute Function

When headphones are plugged in, press the Microphone Mute Button. The indicator turns solid red (mute on). Press again to turn off (indicator off, mute off - default).

Back Buttons Settings

Mappable Buttons: A/B/X/Y/LB/RB/LT/RT/L3/R3/D-pad/Menu/Xbox/View Button.

1. Set R4/L4 Button Value: Hold M + R4/L4 for 3s. Indicator blinks slowly. Tap the desired button to map. Indicator turns solid to confirm.
2. Cancel R4/L4 Button Value: Hold M + R4/L4 for 3s. Indicator blinks slowly. Tap R4/L4. Indicator turns solid to confirm cancellation.

Joysticks & Triggers Calibration

1. Initiate Calibration: Hold View + Menu + Xbox buttons. Insert USB-C cable into PC. Indicator blinks slowly white.
2. Start Calibration: Ensure LT, RT, left, and right joysticks are untouched. Press A button. Indicator turns off.
3. Calibration Steps: Press LT & RT to maximum travel. Rotate joysticks to maximum angles 3 times. Press A button. Indicator turns solid white to confirm completion.
4. Post-Calibration: Unplug and replug the controller before use.

Customization via "GameSir Nexus" Software

Download "GameSir Nexus" from Microsoft Store (Xbox/PC) or gamesir.hk. Use it to upgrade firmware and create up to 3 custom profiles. Profiles allow button mapping, joystick/trigger zone adjustment, vibration control, etc.

Note: If software R4/L4 mapping differs from manual settings, the software setting prevails.

Profile Switching

Press M + A/B/X/Y buttons in sequence to switch profiles:

• M + Y = Default Profile
• M + B = Profile 1
• M + A = Profile 2
• M + X = Profile 3

Legal Information

Microsoft, Xbox, Xbox "Sphere" Design, Xbox Series X, Xbox Series S, Xbox Series X|S, Xbox One, Xbox Game Pass, Windows 10/11 are trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners.

For customer service and more information, visit https://www.gamesir.hk/pages/ask-for-help.