Sonoff ZBMINIL2 Zigbee Smart Relay Quick Start Guide
This guide provides essential information for the installation and operation of the Sonoff ZBMINIL2 Zigbee Smart Relay.
Safety Precautions
Important: Device installation and fault repair should be performed by qualified electricians only. To prevent electric shock, do not perform wiring operations or touch wiring terminals when the device is powered on.
Product Information
Product Name: ZBMINIL2 Smart Switch V1.5
Material & Printing: 105g coated paper, 4-color printing, accordion 16-page fold.
Dimensions: Unfolded: 672x58mm, Folded: 42x58mm.
Print Date: 2024.11.15
Certifications: CE, FCC, RoHS (indicated by markings).
Installation and Pairing
The Sonoff ZBMINIL2 is a Zigbee-enabled smart relay designed for smart home automation.
Installation Steps:
Follow these general steps for installation. Refer to the original document's diagrams for precise wiring connections.
- Ensure the power supply is turned off before proceeding.
- Wire the ZBMINIL2 into your electrical circuit, connecting the power input (L, N) and the load output (L, N) according to the device's terminal markings.
- Securely mount the device in a suitable location.
- Restore power to the circuit.
Zigbee Pairing:
To connect the ZBMINIL2 to your Zigbee network:
- Ensure your Zigbee hub is powered on and in pairing mode.
- To put the ZBMINIL2 into pairing mode, typically you need to power cycle the device a specific number of times (e.g., turn on, wait a few seconds, turn off, repeat 3-5 times). The device will usually indicate pairing mode with an LED indicator or a specific behavior. (Refer to original document for exact sequence).
- The ZBMINIL2 should appear in your Zigbee hub's device list. Confirm the pairing.
Operation
Once paired, the ZBMINIL2 can be controlled via your Zigbee hub's mobile application or integrated with other smart home platforms. You can typically turn connected lights or appliances on/off remotely, set schedules, and create automations.
