1. Вовед и безбедносни информации
This manual provides essential instructions for the safe installation, operation, and maintenance of your FDPBY Modern Vanity Light. Please read this manual thoroughly before installation and retain it for future reference.
1.1 Општи безбедносни мерки на претпазливост
- Електрична безбедност: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about electrical wiring.
- Правилно заземјување: Осигурајте се дека апаратот е правилно заземјен за да избегнете потенцијален електричен удар.
- Барања за светилки: Use only E26 standard bulbs with a maximum wattage of 60W. Do not exceed the recommended wattage.
- Ракување: Внимателно ракувајте со кристалните компоненти за да спречите кршење.
- Локација: This fixture is designed for indoor use in bathrooms or dressing tables. It is not water-resistant and should not be exposed to direct water spray.
2. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата. Доколку недостасуваат или се оштетени некои делови, ве молиме контактирајте ја службата за корисници.
- Vanity Light Fixture (Brushed Nickel with Crystal Shades)
- Монтажни хардвери (завртки, жичени навртки, монтажна плоча)
- Extra Replacement Crystal Strips
- Упатство за употреба
Note: E26 standard bulbs are not included and must be purchased separately.
3. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | FDPBY |
| Име на моделот | Суета светлина |
| Број на модел | 002 |
| Боја | Nickel Straight |
| Материјал | Кристал, метал |
| Тип на завршница | Брусен |
| Димензии на производот | 20.47"Д x 7"Ш x 7.48"В |
| Број на извори на светлина | 3 |
| Основа за сијалица | E26 US Standard Socket |
| Макс Ватtage по сијалица | 60 W |
| Voltage | 110 волти |
| Тип на извор на светлина | LED, Halogen, Incandescent, CFL (bulbs not included) |
| Посебни карактеристики | Instant On, Dimmable (with compatible bulbs/switches) |
| Тип на инсталација | Полуфлеш монтажа |
| Внатрешна/надворешна употреба | Затворен |
| Потребно е собрание | Да |
4. Поставување и инсталација
This fixture is designed for American Standard junction boxes. For your safety, it is recommended to have a qualified electrician perform the installation.
4.1 Чекори пред инсталација
- Исклучете го напојувањето: Пронајдете го прекинувачот што го контролира напојувањето на светилката и исклучете го. Проверете дали напојувањето е исклучено со помош на волтаикон.tagд тестер.
- Распакувајте ја содржината: Внимателно извадете ги сите компоненти од пакувањето. Проверете дали има оштетувања.
- Подготовка на жици: If replacing an existing fixture, carefully disconnect the old wiring.
4.2 Постапка за инсталација
- Прикачете ја монтажната плоча: Прицврстете ја монтажната плоча на разводната кутија со помош на приложените завртки.
- Поврзете жици: Connect the fixture's wires to your household wiring using the provided wire nuts. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
- Прицврстувач за монтирање: Carefully align the fixture with the mounting plate and secure it with the decorative nuts or screws.
- Инсталирајте светилки: Screw E26 base bulbs (not included) into the sockets. Do not overtighten.
- Attach Crystal Shades: Carefully attach the crystal shades to the fixture.



5. Упатства за работа
Once installed, your FDPBY Modern Vanity Light is ready for use.
- Вклучување: Вратете го напојувањето на прекинувачот.
- Работа на прекинувачот: Operate the light using your existing wall switch.
- Карактеристика за затемнување: The fixture is dimmable when used with compatible dimmable E26 bulbs and a compatible dimmer switch (not included).


6. Одржување
Regular cleaning will help maintain the appearance and performance of your vanity light.
- Чистење: Пред чистење, проверете дали струјата е исклучена. Користете мека, сува или малку влажна крпа.amp cloth to wipe down the metal finish and crystal shades. Avoid abrasive cleaners or chemicals that could damage the finish or crystals.
- Замена на сијалицата: Always turn off power before replacing bulbs. Allow bulbs to cool completely before handling.
7 Смена на проблеми
If you encounter issues with your vanity light, refer to the following common solutions:
- Светлото не се вклучува:
- Проверете дали прекинувачот е вклучен.
- Ensure bulbs are securely screwed into sockets and are not burnt out.
- Потврдете дека сите жичени врски се безбедни.
- Трепкачки светла:
- Ensure bulbs are fully compatible with any dimmer switch being used.
- Проверете дали има лабави врски со жици.
- Crystal shades appear dull:
- Clean the crystal shades with a soft, lint-free cloth to remove dust or smudges.
If problems persist, contact FDPBY customer support or a qualified electrician.
8. Гаранција и поддршка
FDPBY stands behind the quality of its products.
- Гаранција: This product comes with a 60-day money-back guarantee and a 12-month replacement warranty.
- Поддршка за корисници: For any questions or concerns regarding your vanity light, please contact the FDPBY customer support team via email. We aim to resolve inquiries within 24 hours.