KCO W1032-C

KCO Lighting W1032-C Vanity Wall Sconce Instruction Manual

Model: W1032-C | Brand: KCO

1. Вовед

Thank you for choosing the KCO Lighting W1032-C Vanity Wall Sconce. This modern wall light features a brushed brass finish and a clear bubble glass globe, designed to provide a balanced lighting source for various indoor settings. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: РИЗИК ОД СТРУЕН УДАР. Исклучете го напојувањето на кутијата со осигурувачи или прекинувачот пред инсталација или сервисирање.

  • Внимателно прочитајте ги сите упатства пред да започнете со инсталацијата.
  • All electrical connections must be in accordance with local codes, ordinances, or national electrical code (NEC).
  • Консултирајте се со квалификуван електричар ако не сте сигурни во врска со ожичувањето или процедурите за инсталација.
  • Не го инсталирајте овој светилник на влажни места. Само за внатрешна употреба.
  • Осигурајте се дека светилката е безбедно монтирана на структурниот елемент од зградата.
  • Користете го само наведениот тип на сијалица и ватиtage (E26, max 60 watts).
  • Do not touch the bulb directly with bare hands; use a clean cloth or gloves.

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:

  • Wall Sconce Fixture (Brushed Brass with Clear Bubble Glass Globe)
  • Комплет за монтирање (вклучува монтажна плоча, завртки, жичени навртки)
  • Прирачник за инсталација
  • Note: E26 bulb is not included.

4. Спецификации

КарактеристикаДетал
БрендKCO
Број на моделW1032-C
БојаGold + Clear
МатеријалСтакло, Метал
СтилМодерен
Форма на светлечки телаSconce
Тип на собаLiving room, dining room, bedroom, bathroom, kitchen, hallway, coffee shop, stairway, corridor
Извор на енергијаЕлектричен со кабел
Извор на светлинаLED (Светилката не е вклучена)
Број на извори на светлина1
Voltage100-220 Volts (Worldwide compatible)
ВатtageМаксимум 60 вати
Основа за сијалицаЕ26
Тип на монтирањеМонтирање на ѕид
Тип на инсталацијаHardwired (Flush Mount)
Задолжително собраниеДа
Димензии на ставката (Д x Ш x В)8.2" x 5.9" x 23.2" (21 см x 15 см x 59 см)
Дијаметар на глобус5.9" (15 см)
Дијаметар на крошна4.7" (12 см)
Тежина на ставката2.1 фунти

5. Поставување и инсталација

This wall sconce is designed for hardwired installation. Please follow these steps carefully. It is recommended to have a qualified electrician perform the installation.

  1. Подгответе се за инсталација:
    • Исклучете го напојувањето на прекинувачот или кутијата со осигурувачи за да избегнете електричен удар.
    • Погрижете се површината за монтирање да биде чиста, сува и структурно стабилна.
    • Распакувајте ги сите компоненти и проверете ги според листата со содржината на пакувањето.
  2. Assemble the Fixture (Pre-installation):
    • Unscrew the fixing screws from the lamp држач.
    • Carefully install the E26 bulb (not included) into the lamp држач.
    • Place the clear glass lampshade over the bulb and secure it by screwing the fixing screws back into place.
    • Attach any extension poles if necessary, ensuring they are securely tightened.
    • Install the chassis (mounting plate) to the fixture, ensuring the wires are correctly routed.
    Video: Assembly steps for the KCO Lighting Wall Sconce, demonstrating bulb and lampshade installation, and chassis attachment.
  3. Монтирање на тела:
    • Attach the mounting plate to the junction box in your wall using the provided screws.
    • Поврзете ги жиците на светилката со жиците во куќата:
      • Поврзете ја црната жица (под напон) од светилката со црната жица од разводната кутија.
      • Поврзете ја белата жица (нулта) од светилката со белата жица од разводната кутија.
      • Поврзете ја зелената или гола бакарна жица (заземјување) од светилката со жицата за заземјување од разводната кутија.
      • Прицврстете ги сите врски со жичани навртки и електрична лента.
    • Внимателно заглавете ги сите жици во разводна кутија.
    • Align the fixture's canopy with the mounting plate and secure it with the decorative nuts or screws.
  4. Конечна проверка:
    • Проверете дали сите врски се цврсти и сигурни.
    • Вратете ја струјата на прекинувачот или кутијата со осигурувачи.
    • Тестирајте го светилката.
Детално view of KCO Lighting Vanity Wall Sconce components including US E26 Socket, Clear Glass Lampshade, Iron Canopy, and Gold Textured Lamp Тело.
Слика: Детална view of the sconce components, highlighting the E26 socket, clear glass lampshade, iron canopy, and gold textured lamp тело.
KCO Lighting Vanity Wall Sconce dimensions, showing height of 23.2 inches (59cm), width of 8.2 inches (21cm), globe diameter of 5.9 inches (15cm), and canopy diameter of 4.7 inches (12cm).
Image: Dimensions of the KCO Lighting Vanity Wall Sconce, including overall height, width, globe diameter, and canopy diameter.

6. Упатства за работа

Once properly installed and powered, the KCO Lighting W1032-C Vanity Wall Sconce operates via a standard wall switch (not included). Ensure the bulb is correctly installed before turning on the power.

  • За да го вклучите светлото, префрлете го поврзаниот ѕиден прекинувач во положба „ВКЛУЧЕНО“.
  • За да го исклучите светлото, префрлете го поврзаниот ѕиден прекинувач во положба „ИСКЛУЧЕНО“.
Image showing the KCO Lighting Vanity Wall Sconce with the E26 bulb base, illustrating the light in both off and on states.
Image: The E26 bulb base and the sconce in both off and illuminated states.

7. Одржување

Regular maintenance will help preserve the appearance and functionality of your wall sconce.

  • Чистење: Always disconnect power before cleaning. Use a soft, dry cloth to wipe the metal and glass surfaces. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Замена на сијалицата: Ensure power is off and the bulb has cooled completely before attempting to replace it. Unscrew the glass globe, then carefully unscrew the old E26 bulb and replace it with a new one (max 60 watts). Reattach the glass globe securely.
  • Инспекција: Периодично проверувајте за лабави врски или знаци на абење. Доколку се пронајдат проблеми, консултирајте се со квалификуван електричар.

8 Смена на проблеми

If your KCO Lighting Vanity Wall Sconce is not functioning as expected, refer to the following common issues and solutions:

ПроблемМожна причинаРешение
Светлото не се вклучува.
  • Напојувањето е исклучено на прекинувачот.
  • Сијалицата е лабава или изгорена.
  • Wiring connections are loose or incorrect.
  • Проверете го прекинувачот и осигурајте се дека напојувањето е вклучено.
  • Затегнете ја или заменете ја сијалицата E26.
  • Turn off power, then check and secure all wiring connections. Consult an electrician if needed.
Светлината трепери.
  • Лабава сијалица.
  • Лабава врска со жици.
  • Некомпатибилен прекинувач за затемнување (доколку е применливо).
  • Затегнете ја сијалицата.
  • Turn off power, then check and secure all wiring connections.
  • Ensure your dimmer switch is compatible with LED bulbs (if using LED).
Glass globe is loose.
  • Fixing screws are not tightened.
  • Gently press the globe into the base and ensure the fixing screws are tightened.

9. Гаранција и поддршка

KCO Lighting offers a 1-year professional after-sales service for this product. If you receive a broken, damaged, or cracked glass lampshade, a damaged lamp body, or are missing any parts, please communicate with the seller via your order number. We will send you a replacement as soon as possible.

For further assistance or inquiries, please refer to your purchase platform or contact KCO Lighting customer service directly.

© 2026 KCO Lighting. Сите права се задржани.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.