MIZUDO Pairing with LetSmart App
Specifications
- Product Name: Water Filtration System
- App Name: LetSmart App
- Network Compatibility: 2.4 GHz Wi-Fi
Product Usage Instructions
Quick Start Guide
Pairing with the LetSmart App
Getting Started
Welcome to the LetSmart App for controlling your Water Filtration System!
Pairing with the LetSmart App
Step 1: Download the LetSmart App
Scan the QR code below or search “LetSmart” in your app store:
Step 2 Pair with the Water Filtration System
Wi-Fi connection must use a 2.4 GHz network. If your Wi-Fi router supports both 2.4 GHz and 5 GHz but you can only find the 5 GHz network, the device will automatically connect to the 2.4 GHz network.
- Open the App, sign or log in to your account. Enable Bluetooth and Wi-Fi permissions on your phone.
- Make the device ready for pairing, indicated by the Wi-Fi icon
flashing on the device display.- When powered on, the device automatically enters pairing mode.
- If the Wi-Fi icon is not flashing, click the WiFi button.
- If your device has been paired, press and hold the WiFi button for 5 seconds.
- On the homepage, click the “+” icon at the top right (Figure 1-1), then click “Add Device” (Figure 1-2). Enter the WiFi configuration page, select your home Wi-Fi, enter the password, and click “Next” (Figure 1-3). Wait for about a minute for the pairing to complete (Figure 1-4).
These pages are for reference only. Features and interfaces may change without notice.
Troubleshooting
- The Wi-Fi and Bluetooth permissions for the LetSmart App are enabled.
- Wi-Fi network supports 2.4 GHz.
- Wi-Fi name consists of English characters and numbers.
- Wi-Fi password is correct.
Unlinking Your Water Filtration System:
Press and hold the WiFi button for 5 seconds. Release the button when the Wi-Fi icon starts flashing.
Still need help?
- In the LetSmart App device panel, click “FAQ & Feedback” and send us your feedback.
- Contact our customer service team at 1-781-887-0291 or service@mizudo.com.
FAQs
Q: How do I unlink my Water Filtration System from the LetSmart App?
A: To unlink the system, press and hold the WiFi button for 5 seconds until the Wi-Fi icon starts flashing.
Q: What if I need further assistance?
A: If you still need help or encounter issues during pairing, please contact our customer support for assistance.
Documents / Resources
 | MIZUDO Pairing with LetSmart App [pdf] User Guide 800GPD, B0F8JX5GDW, B0DHGK9CL5, B0F6K7M1RS, B0F6JKKGRQ, Pairing with LetSmart, Pairing with LetSmart App, App |