MINEW MWC01 Bluetooth Rechargeable Badge

Product Information

The MWC01 is a rechargeable badge created by Minew for personnel management. It is designed for check-in/out and flow monitoring purposes. The badge features a magnetic charging port, making it easy to recharge. It also includes an external button and a vibration motor, which are friendly to the visually impaired and can be used for first aid or status reports.

Key Features

• Smart magnetic charging
• Visual or auditory disability-friendly with vibration motor
• Multiple RFID frequencies
• 492 ft (150 m) broadcast distance

Market Applications

The MWC01 badge can be widely used in various applications, including:

• Personnel management in museums, aquariums, and other large indoor places
• Smart office check-ins, personnel flow monitoring, and route tracing

Product Specifications

Basic Specifications:

• Body material: ABS + PC
• Color: White
• Size (L * W * H): 86 * 55 * 6 mm
• Weight: 19 g (without accessories)
• Battery: 1 rechargeable battery, 290 mAh
• Charging time: Approximately 2 hours at room temperature with a 5 V/1 A power adapter
• Battery life: Up to 3 months (depending on usage)
• Sensor: Accelerometer
• Button: 1
• Vibration motor: 1
• LED: 1 RGB light
• RFID: LF/HF/UHF optional
• OTA: Supported
• Configuration App: BeaconSET+

Technical Specifications:

• Chip: Bluetooth version
• Broadcast frequency: 100 ms ~ 5 s
• Broadcast distance: Up to 492 ft / 150 m (open area)
• Working temperature: -20°C ~ 60°C
• Security: Password verification to change settings, restart, non-connectable mode, malicious connecting proof supported

Broadcast Specifications:

(Default settings)

• iBeacon (on)
• UUID (16 bytes): E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (configurable)
• Minor (2 bytes): 0 (configurable)
• Measured power: -59 dBm (0xC5) @1 m
• Tx power: 0 dBm
• Interval: 900 ms

Compatibilities:

• Supported systems: iOS 10.0 and above, Android 4.3 and above
• Supported models: iPhone 6/6 Plus/6S/6S Plus/7/7 Plus/8/8 Plus/X/XR/XS/XS Max/SE/SE2/11/11 Pro/11 Pro Max

Product Overview

MWC01 is a rechargeable badge created by Minew for personnel management, which allows check-in/ out and flow monitoring. The charging port is magnetic and is easy to recharge. It is equipped with an external button and a vibration motor that is friendly to the visually impaired and can be used for first aid or status reports of the wearer.

Key Features
Smart magnetic charging Visual or auditory disability-friendly with vibration motor Multiple RFID frequencies 492 ft (150 m) broadcast distance

Market Applications Personnel management
With a broadcast distance of 492 ft (150 m) and a high level of protection, MWC01 can be widely used in museums, aquariums, and other large indoor places. Wearers’ movement can be tracked so that resources can be efficiently allocated. External buttons are accompanied by vibration feedback. Functions such as first response in hospitals and task completion reports in factories can be achieved with further development.

Smart office
MWC01with built-in RFID can be used for office check-ins, personnel flow monitoring, and employees’ route tracing to human utilization geofencing function allows access control as levels of permissions for different areas can be set. Such visitor management protects company privacy to the greatest extent possible.

Product Specifications

Basic Specifications

Bluetooth-related SDKs are available, please contact our sales team for details.

Technical Specifications

Broadcast Specifications

Compatibilities

Instruction

Boot
After holding the button for 3 seconds, the blue light will be on for 3 seconds and vibrate once.

Shutdown
When on, you only can turn it off by the BeaconSET+ App. The blue light flashes 5 times means that it has been powered off.

Battery level
When the battery is lower than 20%, the red light flashes once every 3 s. When being charged, the red light remains on. When the charging is completed, the green light remains on.

App connection and disconnection
When connected the blue light will flash twice. When disconnected, the blue light will flash 3 times.

Connectable mode
MWC01 defaults to connectable mode and can be set to non-connectable mode after connecting the App. MWC01 can return to connectable mode after re-powering in non-connectable mode.

Broadcast:
Click the button once can enter the configurable mode in 1 minute. You can click the button twice or three times to trigger a broadcast. When click the button twice, the blue light flashes twice and the motor vibrates once. When click the button 3 times, the blue light flashes 3 times and the motor vibrates 2 times.

Precautions

1. When the power is low, the red light will flash to give an alarm, Please replace the battery in
2. The use time and broadcast distance fluctuate due to the environment, and the specific time is subject to the actual use.
3. The product can only be immersed in water for a short time and does not support use
4. Do not use the product above the designed working temperature to avoid
5. It is recommended to store the product under -20℃ to 40℃ while charging and discharge the product for 3 months during storage when not in use.
6. Avoid being exposed to direct sunlight for an extended period to mitigate shell
7. Minew will not be responsible for any damage resulting from disassembling

Certifications

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction

Packaging information

Details	Inner carton	External box
Pictures
Quantities	16 pcs	160 pcs
Sizes	30.5 x 11 x 7.2 cm	32 x 23.5 x 40 cm
Gross weight (with accessories )	0.57 kg	6.2 kg

Quality Assurance
The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (tests include transmission power, sensitivity, power consumption, stability, aging, etc.).

Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded).

Declaration

Statement of Rights:
The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and are protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minew’s permission, otherwise, Violators will be held accountable according to law.

Disclaimer:
Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual.

FCC Requirement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Contact Information
SHENZHEN MINEW TECHNOLOGIES CO., LTD.

•   +86 (755) 2103 8160
• www.minew.com
• info@minew.com
• www.minewstore.com
• No.8, Qinglong Road, Longhua District, Shenzhen, China

Documents / Resources

MINEW MWC01 Bluetooth Rechargeable Badge [pdf] User Manual 2ABU6-MWC01, 2ABU6MWC01, MWC01, Bluetooth Rechargeable Badge, MWC01 Bluetooth Rechargeable Badge, Rechargeable Badge, Badge

References

• User Manual