mifa WildBox Bluetooth Speaker 60W Bluetooth 5.3 Wireless User Guide

POWER ON

BLUETOOTH CONNECTION

MODE SWITCH

PLAY

LIGHT

PARTYADD

1. Connect WildBox with your smart phone and laptop and then play music, then it becomes the master speaker
2. Short press the button of the master speaker and other  speaker to enter Party Add mode, the white indicator of the  button will always on and the music will be played  simultaneously after connected successfully.

TWS

1. Press and hold the button of two speakers  there will be a sound “TWS connected” to indicate pairing is complete.
2. When the connection is successful, the button indicator of the master speaker is breathing and flashing, the button indicator of the slave speaker  is always on.(The master speaker is the left channel,  the slave one is the right channel.)

BATTERY

POWER BANK

Technical Specification

Speaker: Outputpower: Frequencyresponse: SNR: Batterytype: Charginginterface: USBoutput: Chargingtimeofbattery: Musicplayingtime: Bluetoothversion: Playableformat: Protectionfunction: Dynamiclight: Dimensionofproduct Weightofproduct: Woofer,2×Φ70mm,Tweeter2×Φ20mm 2×20WRMSWoofer,2×10WRMSTweeter 50Hz~20kHz >80dB Lithiumbattery(3.7V5000mAh)×2 USBType-C 5V/1A Approx.4hours(5V/3A) Approx.24hours(dependingonvolumeandaudiocontent, withdynamiclightoff ) 5.3 MP3,WMA,WAC,FLAC,APE(MicroSDCard) IP67dust-proofandmoisture-proof RGBambientlighting W293mm*H165.8mm*D121.8mm/W11.53”×H6.5”×D4.79” 1.58kg

Documents / Resources

mifa WildBox Bluetooth Speaker 60W Bluetooth 5.3 Wireless [pdf] User Guide WildBox Bluetooth Speaker 60W Bluetooth 5.3 Wireless, WildBox, Bluetooth Speaker 60W Bluetooth 5.3 Wireless, 60W Bluetooth 5.3 Wireless, Bluetooth 5.3 Wireless

References

• User Manual