MiBOXER logoiRGB+CCT Full Touch Remote
Model No.: FUT088

Features

This product adopt worldwide used 2.4GHz frequency, GFSK control method, with the features of low power consumption, long-distance transmitting, strong anti-interference, and fast communication rate. Adopt high-precision touching IC Touching is more stable and sensitive, can control specified Mi-Light / MiBoxer smart light with color, color temperature, saturation, and brightness changing.

Parameters

MiBOXER FUT088 RGB+CCT Full Touch Remote - Parameters

Model No.: FUT088
Working Voltage: 3V(AAA Battery*2PCS)
Transmitting Power: 6dBm
Standby Power: 20uA
Working Temperature: -20~60°C
Radio Frequency: 2400-2483.5MHz
Modulation Method: GFSK
Control Distance: 30m
Size: 47*16.5*134mm

Products Key Diagram

MiBOXER FUT088 RGB+CCT Full Touch Remote - Products Key Diagram

MiBOXER FUT088 RGB+CCT Full Touch Remote - KeyTouch the color ring to change colors.
Under white light mode, adjust color temperature;
Under color light mode, change color saturation.
Slide the brightness slider to adjust the brightness.
Touch the ON button, turn on the linked device.
Touch the OFF button, turn off the linked device.
Press the button to get white light.
Static Red Light.
Static Green Light.
Static Blue Light.

MiBOXER FUT088 RGB+CCT Full Touch Remote - Key 1Dynamic mode switching button.
Slow the speed under the present dynamic mode.
Under static mode, Long press for 2 seconds, the light shine once, the light will be off after 60 seconds.
Accelerate the speed under the present dynamic mode.
Under static mode, Long press for 2 seconds, the light shine once, the light will be off after 10 minutes.

Linking&Unlinking

Remark: The light can be working after linking with the remote.
Linking Instructions

  1. Switch off the light, after 10 seconds switch on again
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 1
  2. When the light is on, short press press ” ON ” 3 times within 3 seconds
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 2
  3. The light blinking 3 times slowly means the linking is done successfully.
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 3MiBOXER FUT088 RGB+CCT Full Touch Remote -warningIf the light does not blink slowly, the linking failed, Pls switch off the light again, and follow the above steps again.

Unlinking Instructions

  1. When the light on, short press ” ON ” 5 times within 3 seconds
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 1
  2. Switch off the light, after 10 seconds switch on again
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 2
  3. The light blinking 10 times quickly, means the unblinking successfully.
    MiBOXER FUT088 RGB+CCT Full Touch Remote - Linking Instructions 3MiBOXER FUT088 RGB+CCT Full Touch Remote -warningIf the light does not blink quickly, the unlink failed, pls switch off the light again, and follow the above steps to unlink again.

Attention

  1. This remote only controls specified Mi-Light / Miboxer products; not all Mi-Light / Miboxer series can work on this remote.
  2. In the use of the remote, if the indicated lamp blinking quickly, pls change the battery in time. Pls, don’t use poor-quality batteries to avoid the leaking of battery liquid to damage the remote.
  3. This 2.4GHz remote is a precise electronic product; don’t use it in humid, high temperature, dust, and high voltage environment; Save it indoors, dry, and no static electricity environment.
  4. Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.

MiBOXER FUT088 RGB+CCT Full Touch Remote -ce

Made in China

Documents / Resources

MiBOXER FUT088 RGB+CCT Full Touch Remote [pdf] User Guide
FUT088, RGB CCT Full Touch Remote

Leave a comment

Your email address will not be published.