Kupu Whakataki
The ACEBEAM EC90 is a high-performance Everyday Carry (EDC) flashlight designed for various applications, offering a powerful beam, long range, and robust construction. This manual provides essential information for the safe and effective use of your EC90 flashlight.
Image: The ACEBEAM EC90 flashlight, showcasing its SFT-90X LED, magnetic tail, rechargeable battery, and USB-C charging capabilities, along with its 573-meter beam distance and 4300 lumens output.
He aha kei roto i te Pouaka
Upon unboxing your ACEBEAM EC90 flashlight, please verify that all the following components are included:
- EC90 Flashlight (Battery Included) x 1
- Hooru x 1
- Raina x 1
- O-rings x 2 (Spare)
- USB Cable (Type-C) x 1
- Pukapuka Kaiwhakamahi x 1
Ngā āhuatanga
- Mahinga Nui: Utilizes a single SFT-90X LED, delivering up to 4300 lumens and a 573-meter beam distance.
- Papa aukume: Allows for hands-free operation by attaching to most metal surfaces.
- Rechargeable & Replaceable Battery: Features convenient USB-C charging and a user-replaceable battery for extended runtime.
- Tohu Pūhiko: Integrated indicator provides timely reminders for recharging.
- Hanga Roa: IP68 rated for dustproof and waterproof performance, with 1.5m drop resistance.
- Hoahoa Kiato: Weighs approximately 8.15 oz (231g) for easy portability.
- Two-Way Clip: Offers flexible vertical or horizontal attachment options.
Image: The EC90 flashlight submerged in water, illustrating its IP68 rating, and an image showing it dropped from 1.5 meters, highlighting its impact resistance.
Tatūnga
1. Tāuta Pūhiko
The EC90 flashlight comes with a battery pre-installed. Before first use, you must remove the insulating film from the battery. Unscrew the tail cap, remove the battery, peel off the protective film, and reinsert the battery with the positive (+) end facing towards the head of the flashlight. Screw the tail cap back on securely.
2. Whakataki Tuatahi
It is recommended to fully charge the battery before the first use to ensure optimal performance and battery longevity. Refer to the 'Charging' section for detailed instructions.
Nga Tohutohu Whakahaere
The EC90 flashlight is operated via a single side switch. Familiarize yourself with the following operations:
Image: A diagram illustrating the various operational modes and controls of the EC90 flashlight, including lock/unlock, brightness levels, Ultra Low, Turbo, and Strobe modes.
Te Hiko / Whakaweto
- Whakakā: Kotahi te pehi i te pana taha.
- Whakaweto: Single press the side switch when the light is on.
Tīpakonga Taumata Tirohanga
When the flashlight is on, press and hold the side switch to cycle through brightness levels: Ultra-Low → Low → Med1 → Med2 → High. Release the switch to select the desired level. The flashlight will memorize the last used brightness level (except Turbo and Strobe).
Aratau Motuhake
- Ultra Low Mode: From OFF, press and hold the side switch for 0.5 seconds to activate Ultra Low mode (5 lumens).
- Aratau Turbo: Double press the side switch from any state (ON or OFF) to activate Turbo mode (4300 lumens). Double press again to return to the previous mode.
- Aratau Strobe: Triple press the side switch from any state (ON or OFF) to activate Strobe mode (4300 lumens). Single press to turn off.
Maukati/Wewete Mahi
- Maukati: From OFF, press and hold the side switch for 3 seconds. The light will flash three times, indicating it is locked.
- Wewete: When locked, press and hold the side switch for 3 seconds. The light will flash three times and enter Ultra Low mode, indicating it is unlocked.
Te utu
The EC90 features a convenient USB-C charging port. Ensure the flashlight is turned off before charging.
- Kimihia te tauranga utu USB-C i te tinana o te rama.
- Connect the provided USB-C cable to the flashlight and plug the other end into a USB power source (e.g., wall adapter, computer, power bank).
- The indicator light on the switch will show the charging status:
- Maama Whero: Kei te haere tonu te utu.
- Maama Kariki: Kua oti te utu.
- Kia oti te utu, momotuhia te taura USB-C.
Image: The EC90 flashlight with its USB-C charging port highlighted, showing the indicator light in red for charging and green for fully charged.
Tohu Taumata Pūhiko
The indicator light on the switch also displays the battery level when the flashlight is in use:
- Marama kahurangi: Te taumata pākahiko > 30%.
- Maama Whero: Battery level 30% - 10% (low battery warning).
- Red Flash Light: Battery level < 10% (critical battery level).
Image: The EC90 flashlight displaying its battery level indicator, with explanations for blue, red, and flashing red lights corresponding to different charge percentages.
Te tiaki
- Te horoi: Horoia te tinana o te rama rama ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Whakahinuhinu: Apply silicone grease to the O-rings periodically to maintain waterproof sealing. Replace O-rings if they appear damaged or worn.
- Tiaki Pūhiko: If the flashlight will not be used for an extended period, remove the battery to prevent leakage. Store the battery in a cool, dry place.
- Miro: Keep the threads of the tail cap clean and lubricated to ensure smooth operation and good electrical contact.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te rama e ka ana | Kua iti, kua pau ranei te pākahiko Insulating film not removed I hē te whakauru o te pākahiko Potae hiku wewete Flashlight is locked | Me utu te pākahiko Remove insulating film Reinsert battery with positive (+) end towards head Whakapaia te potae hiku Unlock the flashlight (press and hold switch for 3s) |
| Ka whiti te marama, ka tapahia ranei | Potae hiku wewete Hoapā paru He iti te pākahiko | Whakapaia te potae hiku Clean battery and flashlight contacts Me utu, whakakapi ranei te pākahiko |
| Kaore e taea te utu | Ko te taura USB kaore i te hono tika He taura USB he, he puna hiko ranei take pākahiko | Ensure secure connection Whakamātauria he taura USB rereke, he puna hiko ranei Whakakapihia te pati ina he tika |
Whakatakotoranga
Image: A table detailing the technical parameters of the EC90 flashlight, including lumens, runtime, distance, and intensity for various modes (Ultra-Low, Low, Med1, Med2, High, Turbo, Strobe), as well as submersible depth and impact resistance.
| Tawhā | Uara |
|---|---|
| LED | 1 x SFT-90X LED |
| Putanga Morahi | 4300 Lumens |
| Tawhiti Kurupae Morahi | 573 Mita |
| Puna Mana | Pūhiko Lithium-Ion Ka taea te utu (Kei roto) |
| Tauranga Whakatau | USB-C |
| Rauemi | Konumohe |
| Ātete wai | IP68 (Submersible up to 2 meters) |
| Atete Paanga | 1.5 Mita |
| Nga Ahinga (D x W x H) | 1.09" x 1.57" x 5.4" (27.8mm x 40mm x 137.5mm) |
| Taumaha | 8.15 oz (231g) (tae atu ki te pākahiko) |
Pūtāhui me te Tautoko
ACEBEAM offers a 10-year warranty on the EC90 flashlight, covering manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or inquiries, please contact ACEBEAM customer service through their official webte waahi, te kaihokohoko ranei i hokona ai te hua.