Kupu Whakataki
The LifePro Rejuvacure Duet Infrared Sauna is designed to provide a personal wellness experience in your home. This 2-person sauna incorporates advanced features such as low EMF carbon-fiber heaters, red light therapy, and 9 chromotherapy modes. Constructed from Canadian Hemlock wood, it also includes integrated Bluetooth speakers and a magazine rack for enhanced comfort and convenience.
He hua mana kei rungaview whakaaturanga ataatacasing the features and benefits of the LifePro Rejuvacure Duet Infrared Sauna.
Tohutohu Tatūnga
Careful assembly is crucial for the proper function and longevity of your sauna. It is recommended that two people perform the assembly.
- Wewete Waenga: Carefully open all boxes and remove components. Inspect all parts for damage.
- Install Base and Back Panel: Place the base panel in the desired location. Install the back panel by aligning it with the base.
- Tāutahia ngā Paewhiri Taha: Attach the left and right side panels, ensuring they securely hook into place.
- Connect Heater Cables: Inside the sauna, connect the power cables for the heater panels.
- Install Bench Panel: Place the bench panel inside the sauna and secure it with the provided screws.
- Tāutahia te Paewhiri o Mua: Attach the front panel, ensuring all walls are securely connected.
- Install Roof Panel: Carefully place the roof panel on top of the sauna structure. Connect the control panel cables and any other wiring on the roof.
- Attach Roof Cover: Secure the roof cover using the provided screws.
- Install Oxygen Ionizer: Mount and connect the oxygen ionizer inside the sauna.
- Install Additional Modules: Attach the magazine rack and towel hook as desired.
- Install Door Handles: Securely attach the door handles to the tempered glass door.
Visual guide illustrating the six main steps for sauna assembly.
This video demonstrates the step-by-step assembly process for the LifePro Rejuvacure Duet Infrared Sauna, from unpacking to final setup.
All components included in the package for sauna assembly.
Nga Tohutohu Whakahaere
Te Hiko / Whakaweto
Locate the main power switch, typically on the exterior control panel. Press to turn the sauna on or off.
Mana Pawera
Use the control panel to set your desired temperature. The sauna operates within a range of 86°F to 140°F (30°C to 60°C). Allow time for the sauna to preheat to the set temperature.
Wātū Matawā
Set the duration of your sauna session using the timer function on the control panel. Sessions can be set from 1 to 60 minutes.
Whakamarama Whero Whero
The sauna is equipped with red light therapy. Activate this feature via the control panel. Red light therapy uses specific light wavelengths (400nm - 882nm) to support skin health and overall wellness.
A couple enjoying the benefits of red light therapy within the sauna.
Chromotherapy Modes
Select from 9 chromotherapy modes to enhance your sauna experience. Each color offers different ambient effects. Adjust the color settings using the control panel.
A woman relaxing in the sauna with green chromotherapy light active.
Nga Kaikorero Nihokikorangi
Connect your device to the sauna's built-in Bluetooth speakers to enjoy music or podcasts during your session. Refer to your device's Bluetooth pairing instructions.
Haora Ionizer
The integrated oxygen ionizer helps purify the air inside the sauna. Activate it as desired for a fresher environment.
Te tiaki
Te horoi o roto
- Wipe down the interior wood surfaces with a clean, damp cloth after each use to remove sweat and residue.
- For deeper cleaning, use a mild, non-toxic wood cleaner. Avoid harsh chemicals or abrasive materials that could damage the wood.
- Ensure the sauna is completely dry before closing the door to prevent mold or mildew growth.
Tiaki Rakau
- The Canadian Hemlock wood is naturally resistant to warping and cracking. However, avoid exposing the sauna to excessive moisture or direct sunlight.
- Do not apply any stains, sealants, or paints to the interior wood, as these can release harmful fumes when heated.
Heater Panels
- Do not touch the heater panels directly when the sauna is in operation or immediately after use, as they will be hot.
- Keep the heater panels clear of any obstructions to ensure proper heat distribution.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te sauna e whakakā. | Power cord not plugged in, circuit breaker tripped, or main power switch off. | Ensure the power cord is securely plugged into a working outlet. Check your home's circuit breaker. Verify the sauna's main power switch is in the 'On' position. |
| Kāore i te rawaka te wera o te sauna. | Temperature setting too low, heater cables loose, or door not fully closed. | Increase the temperature setting on the control panel. Check all heater cable connections. Ensure the sauna door is securely latched to prevent heat loss. |
| Kāore te papa whakahaere e aro mai. | Control panel cables loose or power interruption. | Check the connections of the control panel cables on the roof. Power cycle the sauna by turning it off and on again. |
| Nihokikorangi kaore i te hono. | Device not in pairing mode, or too far from the sauna. | Ensure your device's Bluetooth is on and in pairing mode. Move your device closer to the sauna. Restart both the sauna and your device. |
Whakatakotoranga
- Tau tauira: LP-RJVCRDT-LEMF
- Rahi Hua: 47.3 x 74.8 x 47.3 inihi (R x T x W)
- Taumaha Tūemi: 275 pauna
- Momo Whakawera: Low EMF Carbon-Fiber Heaters
- EMF Level: As low as 0.02µT
- Awhe Pawera: 86°F ki te 140°F (30°C ki te 60°C)
- Momo Rakau: Te Rakau Hemlock o Kānata
- Rahi nohoanga: 2 Tangata
- Hauora Maama: Red Light Therapy, 9 Chromotherapy Modes
- Ororongo: Nga Kaikorero Nihokikorangi
- Ētahi atu āhuatanga: USB Port, Magazine Rack, Oxygen Ionizer
Dimensions of the LifePro Rejuvacure Duet Infrared Sauna.
Information regarding the ultra-low EMF magnetic fields of the sauna.
Key product features at a glance.
Pūtāhui me te Tautoko
Your LifePro Rejuvacure Duet Infrared Sauna comes with a 30-day easy return policy. For any questions, technical assistance, or warranty claims, please contact LifePro Customer Service. When contacting support, please have your order ID and phone number ready to ensure smooth service.
For further assistance, visit the official LifePro webpaetukutuku tirohia ranei ki nga korero whakapiri kua whakaratohia me to hoko.