Oviala Scandinavian 4-Door Buffet L160 cm Light Wood Instruction Manual

Kupu Whakataki

Thank you for choosing the Oviala Scandinavian 4-Door Buffet. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Nga korero haumaru

WHAKATŪPATO: Furniture tipping hazard. To prevent serious injury, this furniture must be securely attached to the wall using the provided anti-tip hardware. Always assemble with caution and ensure the unit is stable before use. Do not allow children to climb on or hang from the furniture.

• Kaua e taea e nga tamariki nga taputapu huihui katoa.
• Ensure all connections are tightened securely before use.
• Do not overload shelves or drawers.
• Place the buffet on a level, stable surface.

Ihirangi mokete

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Oviala customer support.

• Buffet panels (top, bottom, sides, back, shelves)
• 4 tatau
• 4 Hevea wood legs
• Central support leg
• Assembly hardware (screws, dowels, hinges, push-to-open mechanisms, anti-tip kit)
• He pukapuka tohutohu

Whakaritenga me nga Tohutohu Huihuinga

Assembly requires two people. Please follow these steps carefully. A Phillips head screwdriver and a hammer may be required (not included).

1. Hipanga 1: Whakaritehia nga Paewhiri
   Unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify the top, bottom, side, and back panels.
   

   Whakaahua: Mua view of the assembled Oviala Scandinavian 4-Door Buffet, showcasing its light wood finish and four doors.

2. Step 2: Attach Side Panels and Internal Dividers
   Connect the side panels to the bottom panel using the provided hardware (dowels and cam locks/screws). Insert the internal vertical dividers.
   

   Whakaahua: Roto view of the buffet showing multiple shelving compartments, indicating the structure after internal dividers and shelves are installed.

3. Hipanga 3: Tāuta Whata
   Place the adjustable shelves into the desired positions using the shelf pins. Ensure they are level and secure.
   

   Image: The buffet with all four doors open, revealing the internal shelving structure. Each section contains one adjustable shelf.
4. Step 4: Attach Top Panel and Back Panel
   Secure the top panel to the assembled frame. Carefully attach the back panel using small nails or screws, ensuring the unit is square.
   

   Whakaahua: Rear view of the Oviala Scandinavian 4-Door Buffet, showing the back panel and the structure of the unit from behind.

5. Hipanga 5: Tāuta Waewae
   Attach the four Hevea wood legs to the bottom panel. Install the central support leg for added stability. Ensure all legs are firmly tightened.
   

   Whakaahua: He tata view of one of the buffet's legs, showing its round, solid wood design and an adjustable foot for leveling.

6. Step 6: Attach Doors and Push-to-Open Mechanisms
   Mount the hinges to the doors and then attach the doors to the buffet frame. Install the push-to-open mechanisms according to their specific instructions. Adjust hinges for proper door alignment.
   

   Image: The buffet with one door partially open, revealing an internal shelf and the hinge mechanism.
7. Step 7: Secure to Wall (Anti-Tip)
   Using the provided anti-tip kit, securely fasten the buffet to a wall stud. This step is crucial for safety and prevents the furniture from tipping over.

Nga Tohutohu Whakahaere

• Mahi kuaha: The buffet features a push-to-open mechanism. Gently press the center of the door to release the latch and open. To close, push the door until it clicks into place.
• Whakatikatika Papa: The internal shelves are adjustable. To change shelf height, remove items, lift the shelf, reposition the shelf pins to the desired height, and then place the shelf back on the pins.
• Whakataumata: The legs are equipped with adjustable feet. If the buffet is uneven, rotate the feet clockwise or counter-clockwise to achieve a stable, level position.

Te Tiaki me te Tiaki

• Te horoi: Horoia nga mata ki te ngohengohe, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the wood finish.
• Maringi: Me horoi tonu nga pakaru kia kore ai e poke te wai ranei.
• Te Ra: A ape i te noho roa ki te ra tika, ka memenge, ka rereke ranei te tae.
• Te wera me te makuku: Keep the buffet away from direct heat sources and areas of high humidity.
• Pūmārō: Takitaki ia ia nga wa katoa nga wiri me nga hononga kia mau tonu. Whakapikihia ano e tika ana.

Raparongoā

Whakatakotoranga

Pūtāhui me te Tautoko

Oviala products are manufactured to high-quality standards. For information regarding warranty coverage, missing parts, or technical assistance, please contact Oviala customer support. Keep your purchase receipt as proof of purchase.

For customer support, please visit the official Oviala webpaetukutuku tirohia ranei ki nga korero whakapiri kua whakaratohia me to hoko.