Pukapuka Kaiwhakamahi mō ngā Kutikuti Makawe Ahokore VGR 001 Ngaio

Kupu Whakataki

Thank you for choosing the VGR 001 Professional Cordless Hair Clippers. This manual provides essential information for the safe and effective use, maintenance, and care of your new hair clipper. Please read these instructions thoroughly before first use and keep them for future reference.

Image: The VGR 001 Professional Cordless Hair Clippers, showcasing its sleek design and LED display.

Tatūnga

1. Wewete pouaka me nga Waahanga

Kia ata tangohia nga mea katoa mai i te kete. Me mohio kei te noho nga waahanga katoa:

• 1 Katopenga makawe
• 10 Limiting Combs (1.5/3/4.5/6/9/12/15/18/21/24 mm)
• 1 Te pounamu hinu
• 1 Papa Whakatau
• 1 Paraihe horoi
• 1 Taura Whakahaehae
• 1 US Standard Charging Head
• 1 Pukapuka Kaiwhakamahi

Image: All included accessories for the VGR 001 Hair Clipper, including combs, oil, brush, charging base, and cables.

2. Whakataki Tuatahi

Before first use, fully charge the hair clipper. The device is equipped with a 4600mAh rechargeable lithium-ion battery.

1. Connect the charging cable to the charging base and plug the US standard charging head into a power outlet.
2. Place the hair clipper onto the charging base.
3. Ko te whakaaturanga LED ka tohu i te mana utu. Tata ki te 3 haora te roa o te utu katoa.
4. Once fully charged, the display will show the maximum operating time (e.g., 260 minutes) and emit 3 beeping sounds.

Image: Diagram showing charging instructions and estimated charging times for the VGR 001 Hair Clipper.

3. Te Whakapiri i nga Heru Aratohu

Select the desired limiting comb (1.5mm to 24mm) and securely attach it to the clipper blade. Ensure it clicks into place.

Image: The VGR 001 Hair Clipper shown with its 10 limiting combs, illustrating the range of cutting lengths available.

Nga Tohutohu Whakahaere

1. Te Whakakaha/Weto

Press the ON/OFF button located on the front of the clipper to turn the device on or off. The LED display will activate upon powering on.

2. Adjusting Speed (RPM)

The VGR 001 features a high-performance motor with speeds ranging from 7,000 RPM to 9,000 RPM. Turn the center rotary knob to adjust the speed in 100 RPM increments. The LED display will show the current RPM.

Image: The VGR 001 Hair Clipper highlighting its powerful motor and the rotary knob for speed adjustment, with RPM displayed on the screen.

3. Adjusting Taper Lever

The clipper has a 5-position adjustable taper lever, allowing for fine-tuning of cutting lengths from 1.0 mm to 3.0 mm without a comb. This is ideal for blending and fading.

Image: The VGR 001 Hair Clipper showing the adjustable taper lever and its five settings for precise cutting lengths.

4. Te Whakamahi i te Rama LED

Press the front lighting button to activate a light directly above the blade. This feature assists in precise haircutting, especially in dimly lit conditions.

Image: The VGR 001 Hair Clipper with its LED light activated, illuminating the blade area for improved visibility during use.

5. General Hair Cutting Tips

• Me whakarite kia ma, kia maroke hoki te makawe i mua i te tapahi.
• Always start with a longer comb length than desired and gradually reduce it.
• Nekehia te kutikuti ki te ahunga e tupu ai te makawe kia ōrite te tapahi.
• Overlap strokes to avoid missed spots.
• Use the taper lever for blending and detailing around the ears and neckline.

Te tiaki

1. Te horoi i nga Matatahi

Mā te horoi auau ka tino pai te mahi, ā, ka roa ake te ora o tō kutikuti.

1. Turn off and unplug the clipper before cleaning.
2. Whakamahia te paraihe horoi kua whakaratohia hei tango i ngā huruhuru marere mai i ngā mata.
3. For a more thorough cleaning, the blades can be carefully detached (refer to the diagram in the manual for blade removal).
4. Ensure blades are completely dry before reattaching.

2. Whakahinuhia nga Matatahi

Apply a few drops of the included lubricating oil to the blades after each use, or as needed, to maintain sharpness and smooth operation.

1. Ringihia kia 1-2 pata hinu ki te tihi o ngā mata.
2. Whakakāhia te kutikuti mō ētahi hēkona ruarua kia tohatoha ōrite te hinu.
3. Horoia nga hinu i te taikaha ki te kakahu ngohengohe.

3. Tiaki Pūhiko

• Kaua e tukua kia pau rawa te pākahiko i ngā wā katoa kia roa ai tōna ora.
• Whakaorangia te tope ki te wahi matao, maroke ina kore e whakamahia.
• If storing for an extended period, charge the battery to about 50% every few months.

Raparongoā

Whakatakotoranga

• Ingoa Tauira: VGR 001
• Rauemi Mata: Waro maitai
• Tere Motini: 7,000 - 9,000 RPM (21 speed adjustments)
• Pūhiko: 4600mAh Lithium-katote
• Wā Whakataki: Tata ki te 3 haora (tere tere)
• Wā Mahi: Tae atu ki te 260 meneti
• Minimum Cutting Length: 1 mm
• Te Roa Tapahi Morahi: 27 mm (with guide combs)
• Taper Lever Settings: 5 positions (1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm)
• Whakaatu: Large LED Digital Display (shows RPM, remaining operating time)
• Nga waahanga motuhake: Cordless operation, LED light, Smart Clip technology
• Nga Waahanga Kei roto: Hair clipper, 10 guide combs, oil, cleaning brush, charging base, charging cable, US standard charging head.

Pūtāhui me te Tautoko

The VGR 001 Professional Cordless Hair Clippers come with a pūtāhui kotahi tau from the date of purchase. For any issues or inquiries, please contact VGR customer support. We offer 24-hour support to assist you.

For further assistance, please visit the official VGR store or contact your retailer.

Ka mutu te huaview Ataata