HORI NSW-499U

HORI Nintendo Switch Wireless HORIPAD (Teal) Instruction Manual

Tauira: NSW-499U

1. Kupu Whakataki

Mauruuru koe mo te hokoasing the HORI Nintendo Switch Wireless HORIPAD. This controller is officially licensed by Nintendo and designed to enhance your gaming experience with the Nintendo Switch. It features Bluetooth wireless technology, a built-in rechargeable lithium-ion battery, and full motion control capabilities through its accelerometer and gyroscope. Please read this manual thoroughly to ensure proper setup and operation.

2. Ihirangi mokete

Kia tino whakaurua ngā taonga katoa kua whakarārangihia i raro nei ki roto i tō kete:

  • HORI Nintendo Switch Wireless HORIPAD (Teal)
  • USB-C Uira Whakatau

3. Nga Wahanga Tohu

Familiarize yourself with the various parts and controls of your Wireless HORIPAD.

Mua view of the HORI Nintendo Switch Wireless HORIPAD in teal, showing the joysticks, D-pad, A, B, X, Y buttons, Home button, Plus, Minus, and Capture buttons.

Whakaahua 3.1: Mua View of the Wireless HORIPAD

Te taha view of the HORI Nintendo Switch Wireless HORIPAD in teal, highlighting the ergonomic grip and shoulder buttons.

Whakaahua 3.2: Taha View of the Wireless HORIPAD

Hoki/Runga view of the HORI Nintendo Switch Wireless HORIPAD in teal, showing the ZL, ZR, L, R buttons and the USB-C charging port.

Figure 3.3: Back/Top View of the Wireless HORIPAD with USB-C Port

3.1 Patene Tahora

  • Rakau Analog Mauī: Mo te nekehanga me te whakahaere kamera.
  • Rakau Analog Matau: Mō te whakahaere kāmera me te whai i te arotahi.
  • Papa-D: Tāuru aronga.
  • Patene A/B/X/Y: Ngā pātene mahi.
  • Ngā Pātene L/R: Pātene pakihiwi.
  • Ngā Pātene ZL/ZR: Ngā pātene whakaoho.
  • Pātene KĀINGA: Ka hoki ki te Tahua KĀINGA o Nintendo Switch.
  • Pātene + (Tāpiri): Pātene Tīmata/Tatari.
  • - Pātene (Tango): Tīpakohia te paatene.
  • Patene Hopu: Takes screenshots or video clips.
  • Tauranga USB-C: Hei utu i te kaiwhakahaere.

4. Tatūnga

4.1 Te Whakataki i te Kaiwhakahaere

Before initial use, fully charge the Wireless HORIPAD. A full charge provides approximately 15 hours of playtime.

  1. Connect the included USB-C charging cable to the USB-C port on the top of the controller.
  2. Connect the other end of the USB-C cable to a USB port on your Nintendo Switch Dock or a compatible USB wall adapter.
  3. The LED indicator on the controller will illuminate to show charging status. It will turn off or change color when fully charged.

4.2 Whakahoahoa me Nintendo Whakawhiti

Follow these steps to wirelessly connect your HORIPAD to your Nintendo Switch console:

  1. Mai i te Nintendo Switch HOME Tahua, tohua Kaiwhakahaere > Hurihia te Pumau/Whakaraupapa.
  2. While on the Change Grip/Order screen, press and hold the Pātene tukutahi on the top of the Wireless HORIPAD for a few seconds until the player LEDs begin to flash.
  3. Once the controller is successfully paired, the player LED(s) corresponding to its player number will remain lit.
  4. Pehia te He Pihi to confirm and exit the pairing screen.

The controller will automatically attempt to reconnect to the last paired Nintendo Switch console when powered on.

5. Nga Tohutohu Whakahaere

5.1 Mana Taketake

The Wireless HORIPAD functions like a standard Nintendo Switch Pro Controller. Use the analog sticks for movement and camera control, the D-pad for directional input, and the A/B/X/Y buttons for in-game actions. The L/R and ZL/ZR buttons provide additional input options, commonly used for attacking, defending, or special abilities.

5.2 Ngā Mana Nekehanga

This controller is equipped with an accelerometer and gyroscope, enabling full motion control in compatible Nintendo Switch games. Tilt, shake, or rotate the controller to interact with games that support these features. Ensure the controller is calibrated correctly within the Nintendo Switch system settings if you experience issues with motion sensing.

5.3 Te Ora Pūhiko

The built-in rechargeable lithium-ion battery provides over 15 hours of gameplay on a single charge. Battery life may vary depending on usage and game type. When the battery is low, the player LEDs may flash to indicate that charging is required. Connect the USB-C cable to recharge.

6. Tiaki

6.1 Te horoi

To clean your Wireless HORIPAD, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the controller's finish and internal components. Avoid getting moisture into any openings.

6.2 Rokiroki

Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid placing heavy objects on the controller. If storing for an extended period, ensure the battery is partially charged (around 50%) to help maintain its longevity.

7. Te Raru

If you encounter any issues with your Wireless HORIPAD, please refer to the table below for common problems and solutions.

Putanga Rongoā
Controller does not connect to Nintendo Switch.
  • Me mohio kei te utuhia te kaiwhakahaere.
  • Whakahokia te tukanga takirua (Wahanga 4.2).
  • Ensure the Nintendo Switch console is updated to the latest system software.
  • Try restarting the Nintendo Switch console.
Kāore te kaiwhakahaere e utu.
  • Verify the USB-C cable is securely connected to both the controller and the power source.
  • Whakamātauria he taura USB-C rereke, he puna hiko ranei.
  • Ensure the power source is providing sufficient power.
Taurua te takamuri, nga patene/rakau kore urupare ranei.
  • Ensure the controller is within the 32-foot wireless range of the console.
  • Whakaitihia te pokanoa mai i etahi atu taputapu ahokore.
  • Tirohia te taumata pākahiko o te kaiwhakahaere.
  • Recalibrate the analog sticks and motion controls in the Nintendo Switch system settings.
Motion controls are not working correctly.
  • Calibrate the motion controls in the Nintendo Switch system settings (HOME Menu > System Settings > Controllers and Sensors > Calibrate Motion Controls).
  • Ensure the game you are playing supports motion controls.

8. Whakatakotoranga

Technical details for the HORI Nintendo Switch Wireless HORIPAD (Model NSW-499U):

Āhuahira Taipitopito
Tau tauira NSW-499U
Hononga Nihokikorangi Ahokore
Mokowoko Korekore Tae atu ki te 32 putu (tata ki te 10 mita)
Momo Pūhiko Ka taea te whakakore i te Lithium-katote
Ora Pūhiko Approx. 15+ hours per charge
Tauranga Whakatau USB-C
Mana Motini Accelerometer, Gyroscope
Taumaha 1.18 pauna (tata ki te 0.54 kg)
Ahu mōkihi 7.05 x 6.22 x 3.03 inihi (tata ki te 17.9 x 15.8 x 7.7 cm)
Kaihanga HORI
Raihana Mana Officially Licensed by Nintendo

9. Raihana me te Tautoko

For warranty information, technical support, or further assistance with your HORI Nintendo Switch Wireless HORIPAD, please visit the official HORI website or contact their customer support directly. Details regarding product warranty periods and service procedures are typically available on the manufacturer's official support pages.

Tena koa pupurihia to tohu mo te hoko mo etahi kereme whakamana.