SHAD Top Master Fitting Kit for Yamaha NMAX 125/155 (Model Y0NX15ST)

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your SHAD Top Master Fitting Kit, model Y0NX15ST, designed specifically for Yamaha NMAX 125 and NMAX 155 motorcycles. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Hua Neke Atuview

The SHAD Top Master fitting kit is a specialized support system that allows for the secure mounting of a SHAD top case onto your Yamaha NMAX 125 or NMAX 155 motorcycle. This kit is engineered to integrate seamlessly with your specific motorcycle model, ensuring a high-quality, comfortable, and secure attachment point for your top case. It is designed for straightforward assembly and disassembly.

Figure 1: SHAD Top Master fitting kit with a SHAD top case mounted on a Yamaha NMAX motorcycle. The fitting kit provides a stable platform for the top case.

3. Nga korero haumaru

• Always ensure all bolts and fasteners are securely tightened according to the torque specifications (if provided in the kit's specific instructions).
• Regularly check the fitting kit for any signs of wear, damage, or loose connections, especially after long rides or off-road use.
• Do not exceed the maximum load capacity specified for your SHAD top case or the motorcycle's rear rack.
• Be aware that adding a top case can affect the motorcycle's handling, especially at high speeds or in windy conditions. Adjust your riding style accordingly.
• Professional installation is recommended to ensure correct and safe mounting.

4. Ihirangi mokete

Before beginning installation, verify that all components are present in your package:

• SHAD Top Master fitting components (specific brackets and arms)
• Ngā taputapu whakairi (ngā pūtu, ngā whakakā, ngā nati)
• Installation instructions (often a diagrammatic guide)
• Note: The top case and its specific mounting plate (grille) are sold separately and are not included with this fitting kit.

5. Tatūnga me te Tāuta

This section outlines the general steps for installing the SHAD Top Master fitting kit. Refer to the specific diagrammatic instructions included with your kit for precise bolt locations and torque specifications.

1. Whakapaia te Motopaika: Ensure the motorcycle is stable on its center stand or a paddock stand. Turn off the engine and remove the key.
2. Remove Existing Components (if necessary): Depending on your Yamaha NMAX model, you may need to remove the original grab handles or rear paneling to access the mounting points.
3. Attach Main Brackets: Identify the main support brackets of the SHAD Top Master kit. These typically attach to existing points on the motorcycle's subframe or rear fender area. Secure them loosely with the provided hardware.
4. Install Support Arms: Connect any additional support arms or cross-members to the main brackets, forming the base for the top case mounting plate. Ensure proper alignment.
5. Mount the Top Case Plate (Sold Separately): Once the fitting kit is securely installed, attach your SHAD top case's specific mounting plate (grille) to the Top Master fitting kit using the hardware provided with the top case.
6. Whakapaia nga Piripiri Katoa: Systematically tighten all bolts and nuts to the manufacturer's recommended torque specifications. Start from the main frame connections and work outwards. Double-check all connections.
7. Taki Whakamutunga: Gently shake the installed fitting kit and mounting plate to ensure it is rigid and has no excessive play.

Tuhipoka Nui: The fitting kit is not suitable for large SHAD top case mounting plates (D1B591PA) or aluminum mounting plates (D1BTRPA2 and D1BTRPA). Ensure compatibility with your chosen SHAD top case.

6. Operating (Using the Top Case)

Once the SHAD Top Master fitting kit and the top case mounting plate are installed, you can attach and detach your SHAD top case.

• Attaching the Top Case: Align the bottom of your SHAD top case with the mounting plate. Press down firmly until you hear a click, indicating it is securely locked. Always check by gently pulling upwards on the case to ensure it is fully engaged.
• Detaching the Top Case: Insert your key into the top case lock and turn it to the unlock position. Press the release button (location varies by top case model, typically near the lock or handle) and lift the top case upwards to remove it from the mounting plate.

Always ensure the top case is properly locked before riding. Distribute weight evenly inside the top case and avoid placing heavy items at the very rear.

7. Tiaki

Regular maintenance ensures the longevity and safety of your SHAD Top Master fitting kit.

• Tirohanga Ia Wa: Every few months, or before long trips, inspect all bolts, nuts, and connections for tightness. Re-tighten any loose fasteners.
• Te ma: Keep the fitting kit clean from dirt, mud, and road grime. Use a mild soap and water solution, then rinse thoroughly and dry.
• Whakahinuhinu: If any moving parts or locking mechanisms (on the top case plate) feel stiff, apply a small amount of silicone-based lubricant.
• Taki Tukino: Inspect the metal components for cracks, bends, or corrosion. Replace any damaged parts immediately.

8. Te Raru

9. Whakatakotoranga

• Tauira: Y0NX15ST
• Hototahi: Yamaha NMAX 125, Yamaha NMAX 155
• Kaihanga: TENEI
• Taumaha Hua: Tata ki te 3.38 kg (7.45 lbs)
• Rahi Hua: Approximately 0.01 x 0.01 x 0.01 cm (This dimension seems incorrect from source, likely placeholder. Refer to actual product for accurate dimensions.)
• Tae: Pango
• Huihuinga e hiahiatia ana: Ae
• I hangaia me te hanga: In Barcelona

10. Pūtāhui me te Tautoko

For warranty information, technical support, or to purchase replacement parts, please contact SHAD directly through their official webpae, kaitoha whaimana ranei. Puritia to tohu hoko mo nga kereme whakamana.

Kia mōhio: Tērā pea ka rerekē ngā tikanga me ngā herenga motuhake o te pūtāhui i runga i te rohe me te kaihokohoko.