RAVEMEN AOM02 Aluminum Alloy Cycle Computer Mount Instruction Manual

Kupu Whakataki

Thank you for choosing the RAVEMEN AOM02 Aluminum Alloy Cycle Computer Mount. This mount is designed to securely attach your cycle computer and other accessories to your bicycle handlebars, enhancing your cycling experience. Please read this manual carefully before installation and use to ensure proper function and safety.

Nga waahanga hua

Hototahi whanui: Supports Garmin standard devices (e.g., XOSS G/G+ GPS computers, Garmin Edge series 530, 830, 1000, 1030, 130 Plus, Explore, Touring 1040) and includes an adapter for Wahoo cycle computers.
Versatile Accessory Mounting: Allows simultaneous attachment of a cycle computer and a headlight or action camera using the integrated GoPro adapter. Compatible with RAVEMEN FR160 and K-series lights.
Tāutatanga ngawari: Designed for straightforward attachment to 31.8mm road bike handlebars with the included hex wrench.
Hanga Konumohe Roa: Made from lightweight yet robust aluminum alloy, weighing approximately 49.7 grams, ensuring secure device placement.
Hoahoa Ergonomic: The extended mount's angle is engineered to avoid interference with your cycling posture or view.

Hunga Hua

Refer to the image below for detailed dimensions of the RAVEMEN AOM02 mount and its components.

RAVEMEN AOM02 mount with dimensions, GoPro part, and interchangeable Wahoo/Garmin mounts — Image: Detailed dimensions of the RAVEMEN AOM02 mount, including its length (129mm), handlebar clamp diameter (31.8mm), and the dimensions of the GoPro adapter (21.8mm) and interchangeable computer mounts (33.7mm).

Ihirangi mokete

Tena koa tirohia nga mea katoa e whai ake nei kei roto i to kete:

RAVEMEN AOM02 Cycle Computer Mount
GoPro Screw
Wahoo Adapter Parts
Hex Waea

Whakatakotoranga

Waitohu	RAVEMEN
Tau tauira	AOM02
Rauemi	Aluminum Aluminum
Tae	Pango
Taumaha	Approx. 49.7 karamu
Momo Whakaeke	Handlebar (31.8mm diameter)
Hototahi Pūrere	Garmin standard cycle computers, Wahoo cycle computers (with adapter), GoPro-compatible action cameras, RAVEMEN FR160/K-series lights
Whenua Taketake	Haina

Tatūnga me te Tāuta

Follow these steps to install the RAVEMEN AOM02 mount on your bicycle handlebars:

Whakaritea te Paewhiri: Ensure the handlebar area where you intend to install the mount is clean and free of obstructions. The mount is designed for 31.8mm diameter handlebars.
Whakaturia te Maunga: Whakatuwheratia te clamp of the mount and place it around your handlebar. Position it centrally or as desired for optimal viewing and access to your devices.
Tiakina te Maunga: Use the included hex wrench to tighten the screws on the clamp. Tighten them evenly to ensure a secure fit without over-tightening, which could damage your handlebar.
Attach Cycle Computer: Align your Garmin-compatible cycle computer with the mount's interface and twist it clockwise until it locks securely into place. If using a Wahoo device, first attach the Wahoo adapter to the mount, then attach your Wahoo cycle computer.
Attach Other Accessories (Optional): If you wish to attach a GoPro-compatible action camera or a RAVEMEN light, use the GoPro screw to secure it to the adapter located underneath the cycle computer mount.

Installation steps for RAVEMEN AOM02 mount — Image: Step-by-step guide showing how to install the RAVEMEN AOM02 mount onto a bicycle handlebar and attach a cycle computer.

Nga Tohutohu Whakahaere

Once installed, the RAVEMEN AOM02 mount provides a stable platform for your devices:

Cycle Computer Usage: Your cycle computer will be positioned optimally for easy viewing during your ride. Ensure it is securely locked before starting.
Whakamahi apatoko: Any attached action camera or light can be operated according to its own instruction manual. The mount provides a stable base for these devices.

RAVEMEN AOM02 mount with cycle computer and action camera — Image: The RAVEMEN AOM02 mount shown with a cycle computer and an action camera simultaneously attached, demonstrating its versatility.

Te tiaki

To ensure the longevity and optimal performance of your RAVEMEN AOM02 mount, follow these maintenance guidelines:

Te horoi: Horoia te maunga i ia wā ki te wai ngohengohe,amp kakahu hei tango i te paru me te paru. Kaua e whakamahi i ngā matū kaha, i ngā kaihoroi whakakoi rānei.
Tirotiro: Periodically check all screws and connections to ensure they are tight. Re-tighten if necessary, but do not over-tighten.
Rokiroki: When not in use for extended periods, store the mount in a clean, dry place away from direct sunlight and extreme temperatures.

RAVEMEN AOM02 mount being sprayed with water, demonstrating durability — Image: The RAVEMEN AOM02 mount being exposed to water, illustrating its durable and stable construction, including resistance to scratches, shaking, and rain.

Raparongoā

If you encounter any issues with your RAVEMEN AOM02 mount, consider the following:

Ka wetewete te maunga: Kia tino mārama te kakauamp screws are tightened securely with the hex wrench. Do not overtighten.
Device not locking securely: Check if the device is correctly aligned with the mount interface and twisted fully into place. For Wahoo devices, ensure the Wahoo adapter is properly installed.
Hotokoretanga: Verify that your cycle computer or accessory is compatible with Garmin standard mounts or the provided Wahoo/GoPro adapters.

If problems persist, please contact RAVEMEN customer support.

Pūtāhui me te Tautoko

The RAVEMEN AOM02 mount comes with a 1 tau te whakamana kounga mai i te ra o te hokonga. Ka hipokina e tenei raihana nga koha hanga me nga koha rawa i raro i te whakamahinga noa.

For any questions, concerns, or warranty claims, please contact RAVEMEN customer support. Our team is dedicated to providing assistance and ensuring your satisfaction.

Tena koa pupuri i to tohu hoko mo te ratonga whakamana.