FCI GAMEWELL E3ID2-C Inner Door Assembly User Manual

1. Hua Neke Atuview

The FCI GAMEWELL E3ID2-C is an inner door assembly designed for use within a 2-bay 'C' size command center. This component provides a structured mounting surface for various control and monitoring modules, ensuring a secure and organized installation within the fire safety system enclosure.

This image displays the FCI GAMEWELL E3ID2-C Inner Door Assembly, a black rectangular panel with multiple cutouts designed for mounting components within a 2-bay 'C' size command center. The panel features various mounting points around the edges of the cutouts and along its perimeter.

2. Nga korero haumaru

• Always disconnect power to the command center before installing or servicing the inner door assembly.
• Ensure all connections are secure and properly terminated according to local electrical codes and manufacturer specifications.
• Only qualified personnel should perform installation and maintenance procedures.
• Mau taputapu whakamarumaru whaiaro (PPE) e tika ana i te wa e whakauru ana.
• Refer to the main command center manual for additional safety guidelines.

3. Ihirangi mokete

Manatokohia kei te noho katoa nga waahanga me te kore e pakaru i te wa e wetewete ana.

• 1 x FCI GAMEWELL E3ID2-C Inner Door Assembly
• Mounting hardware (if included with the assembly)

4. Tatūnga me te Tāuta

Follow these steps to properly install the inner door assembly into your command center:

1. Prepare the Command Center: Ensure the command center enclosure is securely mounted and all power is disconnected. Open the main door of the command center.
2. Tautuhia nga Piko Whakapiki: Locate the designated mounting points or rails within the 2-bay 'C' size command center where the inner door assembly will be installed.
3. Position the Assembly: Carefully align the FCI GAMEWELL E3ID2-C inner door assembly with the mounting points inside the command center. The cutouts should face outwards, ready to receive modules.
4. Tiakina te Runanga: Use the provided mounting hardware (screws, standoffs, etc.) to firmly attach the inner door assembly to the command center frame. Ensure it is level and stable. Do not overtighten.
5. Tāutahia ngā Kōwae: Once the inner door is secured, proceed to install the necessary control and monitoring modules into the designated cutouts on the assembly. Refer to the individual module's installation guide for specific instructions.
6. Manatokohia te Tāutatanga: Double-check all connections and ensure the inner door assembly and installed modules are secure before restoring power to the command center.

5. Mahi

The FCI GAMEWELL E3ID2-C inner door assembly is a passive component designed to house and organize active modules. Its primary function is to provide a stable and accessible platform for these modules within the command center. Operation of the overall system is dependent on the modules installed on this assembly.

• Access to the modules is gained by opening the main command center door.
• Ensure the inner door assembly remains securely fastened to prevent accidental dislodgement of installed modules.

6. Tiaki

Regular maintenance ensures the longevity and proper functioning of the inner door assembly and the modules it supports.

• Te horoi: Periodically clean the surface of the inner door assembly with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Tirotiro: Annually inspect the mounting hardware for tightness. Ensure there are no signs of corrosion or damage to the assembly.
• Module Check: While inspecting the inner door, also check the security of all modules mounted on it.
• Nga Tikanga Taiao: Ensure the command center environment remains within specified temperature and humidity ranges to prevent damage to the assembly and internal components.

7. Te Raru

As a passive component, the inner door assembly itself rarely experiences