ROCAM CR1028EM Loud Vibrating Alarm Clock User Manual

Kupu Whakataki

The ROCAM CR1028EM Loud Vibrating Alarm Clock is designed to provide a reliable wake-up solution for heavy sleepers, individuals with hearing impairment, and anyone needing a robust alarm. It features a large LED digital display, dual alarms, adjustable brightness, a nightlight, and a bed shaker for enhanced wake-up effectiveness.

This manual provides detailed instructions for setting up, operating, and maintaining your alarm clock to ensure optimal performance.

Ihirangi mokete

• 1x ROCAM CR1028EM Alarm Clock
• 1x Kaiwhakahaere Hiko (DC 5V / 2A)
• 1x Bed Shaker (Length: 1.8m/6ft)
• 1x Tiki Panui USB XNUMXx
• 1x Manual Kaiwhakamahi

Ka mutu te huaview & Mana

Familiarize yourself with the alarm clock's components and control buttons:

Whakaahua: Mua view of the ROCAM CR1028EM alarm clock, showing the large LED display with time and day indicators.

Ngā Pātene o te Paewhiri Runga:

• TIME/DIM: Press to set time and date. Long press to adjust display brightness.
• AL1: Short press to turn Alarm 1 on/off. Long press to set Alarm 1.
• AL2: Short press to turn Alarm 2 on/off. Long press to set Alarm 2.
• - / +: Adjust values during setting modes.
• VOL / 12/24H DST: Adjust alarm volume. Short press to switch between 12/24 hour format. Long press to activate/deactivate Daylight Saving Time (DST).
• SNOOZE/OK/LIGHT: Press to snooze a sounding alarm (9 minutes). In normal mode, short press to adjust nightlight brightness. Long press to confirm settings.

Image: Diagram showing the layout and functions of the control buttons on the top of the alarm clock.

Rear Panel Ports & Switches:

• Wāhanga Pūhiko: Holds 2x AAA batteries (not included) for time memory and alarm backup during power outages.
• Kaikōrero: For audible alarm sound.
• Vibration Intensity Switch (H/M/L): Adjusts the strength of the bed shaker.
• DC IN Tauranga: Ka hono ki te urutau hiko.
• USB Output Port (5V 1A): Mō te utu i ngā taputapu o waho pērā i ngā waea atamai.
• Bed Shaker Power Port: Connects the bed shaker.
• Day Selection Switches (MON-SUN, MON-FRI, SAT-SUN): Set alarm days for Alarm 1 and Alarm 2 independently.

Image: Diagram illustrating the ports, switches, and battery compartment on the rear panel of the alarm clock.

Tatūnga

1. Hononga Hiko: Connect the power adapter to the DC IN port on the back of the alarm clock, then plug the adapter into a standard wall outlet.
2. Tāutanga Pūhiko (Whiringa): Open the battery compartment on the rear and insert 2x AAA batteries. These batteries serve as a backup for time settings and alarm functionality during power interruptions. The display will turn off when running on battery power only, but the alarm will remain active.
3. Hononga Moenga Ruruu: Plug the bed shaker cable into the Bed Shaker Power Port on the rear of the alarm clock. Place the bed shaker under your pillow or mattress for optimal vibration.
4. Tautuhinga Wā Tuatahi:
   • Patohia me te pupuri i te TIME/DIM button until the time digits start flashing.
   • Whakamahia te + or - nga paatene hei whakatika i te haora. Perehi TIME/DIM again to move to minutes.
   • Whakamahia te + or - nga paatene hei whakatika i nga meneti. Perehi TIME/DIM again to move to the day of the week.
   • Whakamahia te + or - nga paatene hei kowhiri i te ra o naianei.
   • Perehi TIME/DIM or SNOOZE/OK/LIGHT hei whakaū me te puta atu i te aratau tautuhinga wā.

Nga Tohutohu Whakahaere

Setting Alarms (AL1 & AL2):

1. Pēhi me te pupuri rānei AL1 or AL2 button until the alarm time digits start flashing.
2. Whakamahia te + or - buttons to adjust the hour. Press the respective AL button again to move to minutes.
3. Whakamahia te + or - buttons to adjust the minutes. Press the respective AL button again to select the alarm mode (Buzzer Only, Vibration Only, or Both).
4. Whakamahia te + or - buttons to choose the desired alarm mode.
5. Pēhia te tēnā AL pātene ranei SNOOZE/OK/LIGHT to confirm and save the alarm setting.

Turning Alarms On/Off:

• Perehi poto AL1 or AL2 button to toggle the alarm on or off. The corresponding alarm icon will appear/disappear on the display.
• To completely cancel an alarm for the next day, press and hold the respective AL button until the alarm indicator disappears.

Mahinga Tohu:

• Ka tangi ana te whakaoho, paatohia te SNOOZE/OK/LIGHT button to activate snooze. The alarm will temporarily stop and ring again after 9 minutes. This can be repeated up to 9 times.

Whakaritea te Tirohanga Whakaatu:

• In normal time display mode, short press the TIME/DIM button to cycle through 5 levels of display brightness (L05 being brightest, L01 being dimmest).

Using the Nightlight:

• In normal time display mode, short press the SNOOZE/OK/LIGHT button to cycle through 3 levels of nightlight brightness (High, Medium, Low, Off).

Whakaritea Te Kaha Wiri:

• On the rear panel, slide the Vibration Intensity Switch to H (High), M (Medium), or L (Low) to set the desired strength of the bed shaker.

Kei te utu i nga taputapu o waho:

• Connect your mobile device's USB charging cable (not included) to the USB Output Port (5V 1A) on the rear of the alarm clock.

Whakaurunga Pāpāho

Image: The ROCAM CR1028EM alarm clock displayed next to its bed shaker, highlighting the dual wake-up functionality.

Image: The ROCAM CR1028EM alarm clock on a nightstand, showing a smartphone charging via its built-in USB port.

Image: The ROCAM CR1028EM alarm clock with its nightlight feature illuminated, providing a soft glow.

Raparongoā

• Alarm not sounding/vibrating: Ensure the alarm is enabled (icon visible on display) and the volume/vibration intensity is set appropriately. Check power connection and battery backup.
• Display too bright/dim: Adjust display brightness using the TIME/DIM pātene.
• Time incorrect: Re-set the time following the "Initial Time Setting" instructions. Check DST setting if applicable.
• Bed shaker not working: Ensure the bed shaker is securely plugged into its dedicated port and the vibration intensity switch is not set to 'Off' or 'Low' if a stronger vibration is desired.

Whakatakotoranga

Pūtāhui me te Tautoko

Your ROCAM CR1028EM Loud Vibrating Alarm Clock comes with:

• 18-Marama Pūtāhui: If the product has any quality issues, please contact ROCAM for a replacement or partial refund.
• Lifetime Free Customer Support: ROCAM provides lifelong free customer support. If you have any questions or concerns, please do not hesitate to reach out.

For support, please contact ROCAM via:

• Īmēra: Support@yelaw.net
• Webpae: http://www.yelaw.net