Milex 2 Burner Gas Braai

Kupu Whakataki

Thank you for choosing the Milex 2 Burner Gas Braai. This manual provides essential information for the safe assembly, operation, and maintenance of your new gas braai. Please read these instructions thoroughly before use and retain them for future reference.

The Milex 2 Burner Gas Braai features powerful burners for precise heat control, a sleek design, and high-quality materials for durability. It includes convenient features such as a warming rack, automatic ignition, and a gas bottle hook.

Nga Korero Haumaru Nui

• Whakamahi Waho Anake: This appliance is designed for outdoor use only. Do not operate indoors.
• Whakahau: Ensure adequate ventilation. Do not operate in an enclosed area.
• Putaka hau: Store gas cylinders in a well-ventilated area, away from heat sources.
• Rauemi mura: Keep flammable materials, liquids, or aerosols away from the appliance.
• Whakamātautau turuturu: Always perform a leak test on all gas connections before first use and after any gas cylinder change.
• Nga tamariki me nga kararehe: Keep children and pets away from the hot appliance.
• Tirohanga: Kaua rawa e waiho te taputapu karekau i te wa e whakamahia ana.
• Pānui Tohutohu: Always read and follow all instructions in this booklet before operating the appliance.

Tatūnga me te Runanga

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included assembly diagram for detailed steps.

1. Assemble the Main Body: Follow the instructions to connect the base and main grill housing.
2. Āpiti Whata Taha: Secure the side shelves to the main body using the provided hardware. These shelves offer convenient space for utensils and platters.
3. Tāuta Wīra: Attach the wheels to the designated locations on the base for easy mobility.
4. Place Cooking Grills and Warming Rack: Position the black matte enamel cast iron cooking grill and the iron wire warming rack inside the braai.
5. Connect Gas Regulator and Hose: The braai comes with a ZA regulator and 60cm PVC hose. Connect the hose to the braai's gas inlet and the regulator to your gas bottle. Ensure all connections are tight.
6. Mahi Whakamatau Leak: Before first use, apply a soapy water solution to all gas connections. Bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not use the braai if a leak is detected.

Whakaahua 1: Mua view of the Milex 2 Burner Gas Braai, illustrating its compact design and side shelves.

Nga Tohutohu Whakahaere

Whakamarama i nga Kaitahu:

1. Kapi tuwhera: Always open the braai lid before lighting.
2. Turn on Gas Supply: Ensure the gas bottle valve is fully open.
3. Ignite First Burner: Push and turn the control knob for the left burner to the "HIGH" position. Immediately push and hold the ignitor button for 3-5 seconds. You should hear a click and see the burner ignite.
4. Ignite Second Burner: Once the left burner is lit, turn its control knob to "HIGH". The right burner will automatically ignite from the flame of the left burner.
5. Whakaritea te wera: Once both burners are lit, adjust the control knobs to your desired heat level (LOW to HIGH).
6. Troubleshooting Ignition: If a burner does not light within 5 seconds, turn off the gas supply, wait 5 minutes, and repeat the lighting procedure. If ignition issues persist, refer to the Troubleshooting section.

Cooking with Your Braai:

• Whakawera mua: Close the lid and allow the braai to preheat for 10-15 minutes on medium heat before placing food on the grill.
• Mana Pawera: Use the control knobs to adjust the flame intensity for different cooking requirements. The integrated thermometer in the hood allows for accurate temperature monitoring.
• Whakawera Rack: Utilize the warming rack to keep cooked food warm or to gently toast buns.
• Te tunu kai: The black matte enamel cast iron cooking grill ensures even heat distribution for consistent results.

Figure 2: The Milex 2 Burner Gas Braai in use, demonstrating the cooking surface and side shelves.

Te Tiaki me te Tiaki

• Te horoi i nga pae kupenga tunutunu: After each use, once the braai has cooled, clean the black matte enamel cast iron cooking grill. The product care instructions specify "Hand Wash Only" for these components. Use a grill brush to remove food residue.
• Horoi o waho: Wipe down the steel hood and front panel with a damp kakahu me te horoi ngawari. A ape i nga kaihoroi awhiowhio ka kino te mutunga.
• Tiaki tahu: Periodically check burner ports for blockages (e.g., from food debris or insects). Clean with a wire brush if necessary.
• Rokiroki: When not in use for extended periods, store the braai in a dry, protected area. Disconnect the gas bottle.

Raparongoā

Whakatakotoranga Hua

• Waitohu: Milex
• Tauira: 2 Burner Gas Braai
• Tae: Pango
• Rauemi: Stainless Steel (Burner, Thermometer, Handle), Steel (Hood & Front Panel), Cast Iron (Cooking Grill), Iron Wire (Warming Rack)
• Ahu mōkihi: 79 x 58 x 44 cm
• Taumaha Tūemi: 13 kg
• Kaitahu: 2, #409 Stainless Steel
• Wehi: Aunoa Aunoa
• Nga Waahanga Kei roto: Gas Braai, ZA Regulator, 60cm PVC Hose
• Whakamahi Manakohia: Outdoor Home Use

Pūtāhui me te Tautoko

For warranty information or technical support, please contact Milex customer service. Spare part information is not available or provided directly in this manual. Please refer to the official Milex website or your retailer for further assistance.

You can visit the official Milex store for more products and information: Milex Store on Amazon.co.za