mooas Flip Square 3-in-1 Fast Wireless Charger Nightlight User Manual

1. Hua Neke Atuview

The mooas Flip Square is a versatile 3-in-1 wireless charging station designed to charge your smartphone, wireless earphones, and smartwatch simultaneously. It also features an integrated nightlight with adjustable brightness levels.

This device supports fast wireless charging, providing up to 15W for smartphones, 5W for earphones, and 3W for smartwatches. Its dual-coil design allows for flexible phone placement, and the adjustable stand enhances usability while charging.

Image: The mooas Flip Square charging a smartphone, wireless earbuds, and a smartwatch simultaneously. The device is shown in a clean desk environment.

2. Ihirangi mokete

Tena koa tirohia kei roto nga taonga katoa kei roto i te kete:

• mooas Flip Square 3-in-1 Wireless Charger
• USB Type-C Cable (color-matched to the charger)
• Pukapuka Kaiwhakamahi

Note: A 9V/3A PD or QC 3.0 adapter is required for fast charging and is not included. A 5V adapter is not supported.

3. Tohutohu Tatūnga

1. Tūhono Pūurutau Hiko: Connect the provided USB Type-C cable to the charging port on the back of the mooas Flip Square.
2. Puna Hiko: Plug the other end of the USB Type-C cable into a compatible 9V/3A Power Delivery (PD) or Quick Charge (QC 3.0) wall adapter. Ensure the adapter meets these specifications for optimal performance and fast charging. Do not use a 5V adapter.
3. Turanga: Whakatakotoria te teihana utu ki runga i tētahi mata pumau, papatahi.

Image: Close-up of the USB Type-C port on the mooas Flip Square, showing a cable connected. The port is designed for convenient plugging in any direction.

4. Nga Tohutohu Whakahaere

4.1 Pūrere Whakataki

• Te Whakautu Waea Atamai: Place your compatible smartphone on the upright charging pad. The dual charging coil allows for both horizontal and vertical placement. Ensure the phone is centered on the charging area for proper connection.
• Te Waea Whakataki: Place your wireless earphone case on the designated flat charging area.
• Smartwatch Charging: Place your compatible smartwatch on the dedicated watch charging stand.

Image: The mooas Flip Square demonstrating a smartphone charging horizontally and vertically, highlighting the dual charging coil feature.

4.2 Te Tu Whakaritea

The smartphone charging stand can be adjusted to various angles. Gently push or pull the stand to achieve your desired viewing angle. This allows for comfortable use of your smartphone while it charges.

Image: A diagram illustrating the range of adjustable angles for the smartphone charging stand on the mooas Flip Square.

4.3 Mahinga Rarama o te po

The integrated nightlight offers two brightness levels. To operate the nightlight:

• Whakakā/Whakatika: Touch the designated sensor button (usually indicated by a light icon) on the front of the device. The light will cycle through low brightness, high brightness, and off with each touch.
• Tautuhinga Taunoa: The default setting when first turned on is low brightness.

Image: The mooas Flip Square with its nightlight feature active, showing the warm and soft light with two brightness levels.

5. Charging Compatibility

The mooas Flip Square is compatible with a wide range of devices. For optimal charging, ensure your device supports wireless charging.

Image: A detailed compatibility chart for various smartphones, earphones, and smartwatches with their respective charging wattages on the mooas Flip Square.

6. Āhuatanga Haumaru

The mooas Flip Square is equipped with multiple safety mechanisms to protect your devices and ensure safe operation:

• Te Rapu Ahanoa Awa (FOD): Prevents charging when metal objects are detected on the charging surface, reducing heat and potential damage.
• Whakawhanatage Parenga (OVP): Safeguards connected devices from excessive voltage urunga.
• Temperature Sensor Control (TSC): Monitors the device's temperature and prevents overheating.
• Te werawera: An air hole on the bottom of the charger helps release heat, further preventing overheating.
• Non-slip Silicone Pad: Located on the bottom, this pad keeps the charger securely in place.

Image: Visual representation of the mooas Flip Square's safety features, including Foreign Object Detection (FOD), Overvoltage Protection (OVP), and Temperature Sensor Control (TSC).

Whakaahua: He taipitopito view of the bottom of the mooas Flip Square, highlighting the nonslip silicone pad and the air hole for heat dissipation.

7. Tiaki

• Te horoi: Momotuhia te rihi mai i te puna hiko i mua i te horoi. Whakamahia he kakahu ngohengohe, maroke hei muru i te mata. Kaua e whakamahia nga kai horoi wai, aerosol ranei.
• Rokiroki: Whakaorangia te taputapu ki te waahi makariri, maroke atu i te ra tika me te wera nui.
• Te whakahaere: A ape i te tuku i te taputapu, te tuku ranei ki nga paanga kaha.

8. Te Raru

9. Whakatakotoranga

Image: An infographic detailing the key features and technical specifications of the mooas Flip Square 3-in-1 wireless charger.

10. Pūtāhui me te Tautoko

The mooas Flip Square 3-in-1 Fast Wireless Charger Nightlight comes with a 1 tau te whakamana a te kaiwhakanao mai i te ra o te hokonga.

For warranty claims, technical support, or any inquiries regarding your product, please contact mooas customer service through the retailer's platform or the official mooas webpae.

Tena koa pupurihia to tohu mo te hoko mo te whakamana whakamana.