Nau mai haere mai
Thank you for choosing the Warmco M02 Rechargeable Hand Warmers. This device is designed to provide reliable warmth and convenient portable charging for your electronic devices. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Nga waahanga matua
- Hoahoa Autō Hou: Two detachable units can be used independently or attached for combined warmth.
- Long-lasting Warmth: Each 5000mAh unit provides up to 9 hours of heat on the lowest setting.
- Tautuhinga Pawera Whakaritea: Three adjustable temperature levels for personalized comfort.
- Taumahinga Puke Hiko: Doubles as a portable charger for your USB-C compatible devices.
- Whakataki Tere: Supports USB-C 10W (5V/2A) fast charging.
- Kiato me te Kawe: Designed for easy carrying in pockets or bags.
Ihirangi mokete
Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:
- 2 x Warmco M02 Electric Hand Warmers
- 1 x 2-in-1 USB Charging Cable (USB-A to 2 USB-C)
- 1 x Peke Kawe
- 1 x Pukapuka Kaiwhakamahi
Image: Contents of the Warmco M02 package, including two hand warmers, a charging cable, a portable pouch, and the user manual.
Tatūnga
Charging the Hand Warmers
Before first use, fully charge both hand warmers. It is recommended to use the provided 2-in-1 USB charging cable for optimal performance.
- Honoa te pito USB-A o te taura utu ki tētahi urutau hiko USB hototahi (kāore i roto).
- Connect the two USB-C ends of the cable to the charging ports on each Warmco M02 hand warmer.
- The LED indicators on the hand warmers will illuminate to show charging status.
- Tata ki te 3.5 haora te wa utu mo te utu katoa.
- Once fully charged, disconnect the hand warmers from the charging cable.
Image: Two Warmco M02 hand warmers connected to a single power adapter via the included 2-in-1 USB-C charging cable, indicating they are charging.
Nga Tohutohu Whakahaere
Te Hiko / Whakaweto
- To power on the hand warmer, press and hold the side button for three seconds. The LED indicators will light up.
- To power off, press and hold the side button for three seconds again.
Te Whakatikatika i nga Tautuhinga Pawera
The Warmco M02 offers three temperature settings:
- Taumata 1 (Iti): 104~113℉ (40~45℃) - Up to 9 hours of warmth per unit.
- Taumata 2 (Waenga): 113~122℉ (45~50℃) - Up to 7.5 hours of warmth per unit.
- Taumata 3 (Teitei): 122~136℉ (50~58℃) - Up to 5.5 hours of warmth per unit.
To cycle through the temperature settings, short press the side button while the device is on. The number of illuminated LED indicators will correspond to the current heat level (1 LED for low, 2 for medium, 3 for high).
Image: Diagram illustrating the three temperature settings (low, medium, high) and their respective operating times for a single hand warmer unit.
Ma te whakamahi hei peeke hiko
Each Warmco M02 unit can also function as a portable power bank to charge your USB-C compatible devices.
- Ensure the hand warmer is powered on.
- Connect your device's USB-C charging cable to the USB-C port on the hand warmer.
- The hand warmer will automatically begin charging your device.
- A single unit can charge a phone over 1.5 times.
Image: Two Warmco M02 hand warmers connected via USB-C cables to charge a smartphone and wireless earbuds, demonstrating their power bank capability.
Hononga aukume
The Warmco M02 features a unique magnetic design, allowing the two units to snap together for easy storage or to provide 360-degree warmth when held together.
Image: Two Warmco M02 hand warmers shown magnetically attracting each other, highlighting their 2-in-1 design for easy packing and use.
Te tiaki
- Te horoi: Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Rokiroki: Store the hand warmers in a cool, dry place when not in use. Use the provided portable pouch to protect them from scratches and dust.
- Tiaki Pūhiko: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not used for extended periods.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Hand warmer not turning on. | Kua weto te pākahiko iti, te taputapu ranei. | Charge the hand warmer fully. Press and hold the power button for 3 seconds. |
| Hand warmer not heating up. | Not in heating mode or low battery. | Ensure the device is powered on and in a heating mode (LEDs illuminated). Recharge if necessary. |
| Device not charging when connected. | Taura he, urutau hiko ranei. | Whakamātauria tētahi atu taura USB-C, tētahi atu urutau hiko rānei. Me whakarite kia mau te hononga. |
| Hand warmer not charging external device. | Hand warmer battery is low or external device is incompatible. | Ensure the hand warmer is sufficiently charged. Verify the external device is USB-C compatible. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Ingoa Tauira | M02 |
| Waitohu | Warmco |
| Pūhiko Raukaha | 5000mAh x 2 (Total 10000mAh) |
| Momo Pūhiko | Lithium-Ion or Lithium-Polymer |
| Whakataunga Whakauru | 5V/2A (10W USB-C) |
| Waa Whakatau | Approx. 3.5 haora |
| Tautuhinga Pawera | 3 Levels: 104~113℉, 113~122℉, 122~136℉ |
| Operating Time (Single Unit) | Low: 9 hours, Medium: 7.5 hours, High: 5.5 hours |
| Dimensions (Each Unit) | 3.70 x 1.18 x 1.18 inihi (9.4 x 3 x 3 cm) |
| Taumaha (Ia Waeine) | 0.26 lbs |
| Rauemi | Battery, Metal, Acrylonitrile Butadiene Styrene (ABS) |
| Tae | Pango |
Ataata Hua Whaimana
Video: An official product video from WarmcoDirect showcasing the Warmco Rechargeable Hand Warmers, highlighting their features and portability.
Pūtāhui me te Tautoko
The Warmco M02 Rechargeable Hand Warmers come with a 2-tau iti pūtāhui. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accident, unauthorized modifications, or improper maintenance.
For warranty claims, technical support, or any inquiries, please contact Warmco customer service. Refer to the contact information provided in your product packaging or visit the official Warmco webpae mo te awhina.