STANLEY Quencher H2.0 FlowState Stainless Steel Vacuum Insulated Tumbler (30 oz) - User Manual

Kupu Whakataki

This manual provides comprehensive instructions for the safe and effective use, care, and maintenance of your STANLEY Quencher H2.0 FlowState Stainless Steel Vacuum Insulated Tumbler. Designed for durability and optimal temperature retention, this 30 oz tumbler is suitable for a variety of beverages, keeping them cold, iced, or hot for extended periods.

Nga waahanga hua

• Double-Wall Vacuum Insulation: Keeps beverages cold, iced, or hot for hours, reducing the need for frequent refills.
• Advanced FlowState Lid: Features a rotating cover with three positions: a straw opening with a splash-resistant seal, a direct drink opening, and a full-cover top for enhanced leak resistance.
• Ergonomic Comfort-Grip Handle: Designed for easy and comfortable carrying.
• Hanga Roa: Made from 90% recycled, BPA-free stainless steel for long-lasting use and environmental responsibility.
• Haumaru te horoi rihi: All components are safe for cleaning in a dishwasher.
• Car Cup Holder Compatible: The narrow base fits most car cup holders (excluding 64oz models).
• Reusable Straw Included: For convenient sipping.

Tatūnga

1. Wewete: Kia ata tangohia nga waahanga katoa mai i te kete.
2. Te horoi tuatahi: Before first use, wash the tumbler, lid, and straw thoroughly with warm, soapy water or place them in a dishwasher. Rinse completely and allow to air dry.
3. Huinga taupoki: Ensure the silicone gasket is properly seated within the lid. Insert the reusable straw into the straw opening if desired.

Nga Tohutohu Whakahaere

1. Whakakī: Whakakīia te ipu ki te inu e hiahiatia ana e koe. Kaua e whakakī rawa; waiho he wāhi mō te taupoki.
2. Te Tiaki i te Upi: Place the FlowState lid onto the tumbler and twist clockwise until it is securely tightened.
3. Lid Positions: The rotating cover on the lid offers three positions:
   • Straw Opening: For use with the reusable straw. The seal helps resist splashes and holds the straw in place.
   • Drink Opening: For direct sipping without the straw.
   • Full-Cover Top: Rotate the cover to fully close both openings for maximum leak resistance during transport.
4. E mau ana: Use the ergonomic handle for convenient transport. The narrow base is designed to fit most standard car cup holders.

Te Tiaki me te Tiaki

• Te horoi Riu: All components of the STANLEY Quencher H2.0 FlowState Tumbler are dishwasher safe. Place them on the top rack for best results.
• Horoi ringa: For hand washing, use warm water and mild dish soap. A bottle brush may be helpful for cleaning the interior of the tumbler. Ensure all parts, especially the lid and straw, are thoroughly cleaned to prevent residue buildup.
• whakamaroke: Allow all components to air dry completely before reassembly or storage to prevent odors and mildew.
• A ape i te Abrasive: Do not use abrasive cleaners or scrubbers, as these can damage the finish of the tumbler.

Raparongoā

• Liquid Not Staying Hot/Cold:
  • Ensure the lid is securely tightened and the rotating cover is in the full-cover position when not actively drinking.
  • Check that the silicone gasket in the lid is properly seated and free from damage or debris.
• turuturu:
  • Verify the lid is fully tightened.
  • Confirm the rotating cover is in the full-cover position for maximum leak resistance. Note that the straw opening is designed to resist splashes but may not be entirely leak-proof if inverted.
  • Inspect the silicone gasket for proper placement and any signs of wear or damage.
• He uaua te horoi:
  • For stubborn stains or odors, a mixture of baking soda and water can be used. Let it sit for a few hours before scrubbing and rinsing.
  • Ensure all parts of the lid are cleaned, including under the rotating cover.

Whakatakotoranga

Whakaahua Hua

Ataata Hua

Pūtāhui me te Tautoko

For warranty information, product support, or to contact customer service, please refer to the official STANLEY webpaetukutuku, ngā tuhinga rānei kua whakaurua mai i roto i tō hoko. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui.