PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Nga korero haumaru

WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the product or property.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• Installation must be performed by a qualified electrician and in accordance with all local and national electrical codes.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Manatokohia ko te tuku voltage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
• Do not exceed the maximum output power of 120 Watts.

3. Ihirangi mokete

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 x AAA Battery (mo te mana mamao)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Hua Neke Atuview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Whakauru Voltage: 100-240V AC, 50/60Hz
• Mana Whakarato: 125 Watts
• Mana Putanga: 120 Watts (24V DC)
• Whakatauranga IP: IP65 (Kāore e mimiti te puehu, ā, he mea tiaki hoki i ngā rerenga wai)
• Tiwhikete: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Tatūnga me te Tāuta

I mua i te tiimata o te whakaurunga, me mohio kua momotuhia nga hiko katoa ki te waahi ara iahiko matua.

1. Whakapiki: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Waea Whakauru: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Waea Putanga: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Pūhiko Mana Mamao: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Whakahiko: Once all connections are secure and verified, restore power at the circuit breaker.

6. Nga Tohutohu Whakahaere

6.1. Whakahoahoa i te Mana Mamao

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Me whakarite kei te whakakā te hiko o te whakawhiti hiko.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

• Hiko ON/OFF: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Tīpakonga Tae: Use the color touch wheel to select desired static colors.
• Mana Tirohanga: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Kōwhiringa Aratau: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Mana Rohe: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Tiaki

• Te horoi: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Tirotiro: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Whakakapinga Pūhiko: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8. Te Raru

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webte waahi, te kohinga hua ranei.