OREiN 4500LM/30W Motion Sensor Outdoor Flood Light Instruction Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 4500LM/30W Motion Sensor Outdoor Flood Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Image 1: OREiN 4500LM/30W Motion Sensor Outdoor Flood Light, front view with three adjustable light heads and a motion sensor below.

2. Nga korero haumaru

WHAKATŪPATO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

• Me whakarite kua whakawetohia te pūhiko i mua i te tīmatanga o te tāutanga.
• Use only approved connectors and wiring suitable for outdoor use.
• Kaua e ngana ki te whakarerekē i te taputapu. Mā ngā whakarerekētanga katoa ka whakakorea te pūtāhui, ā, ka puta he tūponotanga mō te haumaru.
• Me korero ki tetahi tohunga hiko ki te kore koe e tino mohio mo tetahi waahanga o te tukanga whakauru.
• This fixture is designed for outdoor use and is IP65 waterproof rated.

3. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• Maama (1)
• Whakapuru (1)
• Ngā tīwiri (mō te whakairinga)
• Wire Nuts (for electrical connections)
• Pukapuka Tohutohu (1)

4. Nga Hua o te Hua

• High Brightness & Efficiency: 4500 Lumens output with 30W power consumption, offering 150LM/W efficiency.
• Pūoko Nekehanga Whakarite: 180° wide sensing angle with a detection range up to 50 feet.
• E toru nga momo mahi: TEST Mode, AUTO Mode, and Dusk-to-Dawn (D2D) Mode for versatile lighting control.
• Maama me te Taurangi: IP65 waterproof rating, constructed from polycarbonate material for resistance against rain, dust, snow, and extreme temperatures.
• Tāuta Hangore: Supports both wall mounting and soffit mounting.
• Mahunga Maama Whakaritea: Three light heads can be independently adjusted to direct illumination where needed.
• Paemahana Tae: 5000 Kelvin (white light).

Image 2: Illustration demonstrating the IP65 waterproof rating, showing the flood light enduring rain, snow, and wind.

Image 3: Diagram showing the flexible adjustment angles of the three light heads (up to 340° horizontally, 90° vertically) and the motion sensor (up to 270° horizontally, 120° vertically).

5. Tatūnga me te Tāuta

This flood light is hardwired and requires connection to your home's electrical system. Professional installation is recommended.

1. Whakaweto Hiko: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
2. Taiapa Whakaeke Haumaru: Āpitihia te whāriki whakairi ki te pouaka hononga mā te whakamahi i ngā tīwiri kua whakaratohia. Kia tino mau te whakau.
3. Tūhono Waea: Connect the household wiring to the light fixture's wires using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green (ground).
4. Whakaorangia te Maama: Mount the light fixture onto the mounting bracket, ensuring a tight and secure fit.
5. Insert Waterproof Plug: Ensure any necessary waterproof plugs are properly inserted to maintain the IP65 rating.
6. Whakaritea nga Upoko Maama: Position the three light heads to cover the desired illumination area.

Image 4: Step-by-step diagram illustrating the hardwired installation process, including securing the mounting bracket, connecting wires, and attaching the light fixture.

Whakaahua 5: Examples of the flood light installed in both wall-mounted and soffit-mounted configurations.

6. Nga Tohutohu Whakahaere

The OREiN flood light features an adjustable motion sensor with three distinct operating modes:

Atahanga 6: Whakatata view of the motion sensor controls, showing dials for TIME (1/5/10 minutes), SENSITIVITY (10ft/20ft/30ft/Max 50ft), and a switch for MODE (TEST/AUTO/D2D).

Kōwhiringa Aratau:

• TEST Mode: The light turns on for a fixed 5-second duration when motion is detected, regardless of ambient light. This mode is used for testing the sensor's coverage area during installation.
• Aratau Aunoa: The light activates only at night when motion is detected. The duration the light stays on and the sensitivity of the sensor can be adjusted.
• D2D (Dusk-to-Dawn) Mode: The light automatically turns on at dusk and turns off at dawn, providing continuous illumination throughout the night. Motion sensing is not active in this mode.

Image 7: Visual explanation of the three operating modes: Test Mode (light on for 5s with motion), D2D Mode (light on all night), and Auto Mode (light on at night with motion for adjustable time).

Adjusting Settings (AUTO Mode):

• TIME Dial: Adjusts how long the light stays on after motion is detected. Options typically include 1, 5, or 10 minutes.
• SENSITIVITY Dial: Adjusts the detection range of the motion sensor. Options typically include 10ft, 20ft, 30ft, or Max (up to 50ft). A higher sensitivity setting means a longer detection distance.

7. Tiaki

Regular maintenance ensures optimal performance and longevity of your flood light.

• Te horoi: Horoia te rama me te arotahi o te pūoko nekehanga i ia wā ki te whakamahi i te wai ngohengohe.amp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Tirotiro: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening. Address any issues promptly.
• Kore Whakakapi Purama: This LED fixture does not require bulb replacement. The integrated LEDs are designed for long-term use.

8. Te Raru

If you encounter issues with your OREiN flood light, refer to the following common problems and solutions:

• Kare te rama e ka ana:
  • Ensure power is supplied to the fixture and the circuit breaker is not tripped.
  • Check the mode setting. In AUTO mode, it will only activate at night. In D2D mode, it will only activate at dusk.
  • Verify the motion sensor is not obstructed.
• Ka mau tonu te rama:
  • If in D2D mode, this is normal operation.
  • If in AUTO mode, reduce the SENSITIVITY setting. Environmental factors like moving branches or passing vehicles can trigger the sensor.
  • Ensure the TIME dial is set correctly.
• Motion sensor is not detecting:
  • Increase the SENSITIVITY setting.
  • Me whakarite kia ma te arotahi o te pūoko, kia kore ai he arai.
  • Verify the sensor is aimed correctly towards the desired detection area.

9. Whakatakotoranga

Image 8: Comparison table showing specifications for different OREiN 3-head flood light models, including the 4500LM/30W version.

10. Pūtāhui

This OREiN flood light is covered by a 24-marama whakamana mai i te ra o te hokonga. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana. Ka kapi te raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa.

11. Tautoko

For any questions, technical assistance, or warranty inquiries, please contact OREiN customer support:

• Tautoko Waea: 1-844-506-1530 (available during working hours)
• Āwhina ipurangi: 7 days a week, 24 hours a day. Please refer to the official OREiN website or contact through the Amazon platform for online support options.