QNIGLO Q168 Rechargeable Kids Walkie Talkies Instruction Manual

Kupu Whakataki

Thank you for choosing QNIGLO Q168 Rechargeable Kids Walkie Talkies. This manual provides essential information for the safe and effective use of your new walkie talkies. Please read it thoroughly before operation and keep it for future reference.

Nga waahanga hua

• Whakawhitiwhiti-rua: Enables clear voice transmission between units.
• Mahi VOX: Hands-free voice-activated transmission without pressing the PTT button.
• 22 FRS Channels & 99 Privacy Codes: Offers multiple communication options and enhanced privacy.
• Ko te rama rama a-roto: Provides illumination in low-light conditions or emergencies.
• USB-C Ka taea te utu: Convenient charging without removing batteries.
• Hoahoa Roa: Shockproof construction for outdoor adventures.
• Awhe Roa: Up to 200 meters communication range in open areas.
• Maukati Matua: Prevents accidental channel changes.

Ihirangi mokete

The QNIGLO Q168 package typically includes:

• QNIGLO Q168 Walkie Talkies (quantity as purchased, e.g., 4 units)
• USB-C Charging Cable(s)
• Lanyard(s)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Nga korero haumaru

• Do not attempt to disassemble or modify the walkie talkie.
• Tiakina te taputapu mai i te wai me te wera nui.
• Whakamahia anake te taura USB-C kua whakaratohia mō te utu.
• Supervise children during use, especially when operating the flashlight.
• A ape i te noho roa ki te ra tika.

Tatūnga

1. Akona Tuatahi: Before first use, fully charge the walkie talkies using the provided USB-C cable. The charging port is located on the side or bottom of the unit. A full charge typically takes approximately 2.5 hours.
2. Whakapirihia te Lanyard: Secure the lanyard to the designated attachment point on the walkie talkie for easy carrying.

Image: QNIGLO Q-168 walkie talkie connected to a USB-C charging cable for charging.

Nga Tohutohu Whakahaere

1. Te Hiko / Whakaweto

• Hei Whakahiko: Patohia me te pupuri i te MENU/Mana pēhi i te pātene kia mārama rā anō te mata.
• Hei Whakaweto: Patohia me te pupuri i te MENU/Mana pēhi i te pātene kia whakaweto rā anō te mata.

2. Whakaritea Rōrahi

• Whakamahia te + a - buttons to increase or decrease the speaker volume.

3. Kōwhiringa Hongere

1. Pehia te MENU/Mana kotahi te paatene. Ko te tau hongere kei runga i te whakaaturanga ka whiti.
2. Whakamahia te + or - nga paatene hei kowhiri i to hongere e hiahia ana koe (1-22).
3. Pehia te MENU/Mana pēhi anō i te pātene hei whakaū i te kōwhiringa hongere.
4. Ensure all walkie talkies intended for communication are set to the same channel and privacy code.

4. Te Whakatakoto i ngā Waehere Tūmataitinga (CTCSS/DCS)

Privacy codes help reduce interference from other users on the same channel. There are 99 available codes.

1. I muri i te whiriwhiri i tētahi hongere, pēhia te pātene MENU/Mana pēhia te pātene kia rua ngā wā. Ka mura te tau waehere tūmataiti.
2. Whakamahia te + or - buttons to select your desired privacy code (01-99). Code 00 means no privacy code is set.
3. Pehia te MENU/Mana pātene anō hei whakaū i te waehere tūmataiti.

5. Te Tuku me te Whiwhi

• Hei Tuku: Patohia me te pupuri i te PTT (Pana-Ki-Korero) button located on the side of the walkie talkie. Speak clearly into the microphone. Release the PTT button when finished speaking.
• Hei Whiwhi: Ensure the PTT button is not pressed. The walkie talkie will automatically receive transmissions on the selected channel and privacy code.

6. Mahi VOX (Te Whakawhitinga Reo)

VOX allows for hands-free communication. When activated, the walkie talkie will transmit automatically when it detects your voice.

1. Pehia te MENU/Mana button three times. The VOX icon and sensitivity level will flash.
2. Whakamahia te + or - buttons to select the VOX sensitivity level (1-3, with 3 being the most sensitive). Select WATE to disable VOX.
3. Pehia te MENU/Mana pātene hei whakaū.

7. Rama Rama

• Pehia te Pūrama button once to turn the LED flashlight on.
• Pehia te Pūrama button again to turn the LED flashlight off.

Image: QNIGLO Q-168 walkie talkie with its LED flashlight activated.

8. Mahi Maukati Matua

The key lock prevents accidental button presses, maintaining your selected settings.

• Hei Maukati: Patohia me te pupuri i te Maukati button until a key icon appears on the display.
• Hei Wewete: Patohia me te pupuri i te Maukati button again until the key icon disappears.

9. Monitor Function (MON)

The monitor function allows you to listen to weak signals on the current channel, overriding any set privacy codes.

• Patohia me te pupuri i te Mane button to activate the monitor function.
• Tukua te Mane pātene ki te wetehohe.

Te tiaki

• Horoia te walkie-talkie ki te wai ngohengohe,amp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.
• Penapenahia ngā waea kōrero ki te wāhi hauhautanga, maroke hoki ina kore e whakamahia.
• Me whakarite kia kati te uhi o te tauranga utu kia mau tonu te aukati wai.
• Regularly charge the units to maintain battery health, even if not used frequently.

Raparongoā

Whakatakotoranga

• Tauira: Q168
• Waitohu: QNIGLO
• Hongere: 22 FRS Channels
• Waehere Tūmataitinga: 99 Ngā Waehere CTCSS/DCS
• Maximum Talking Range: Up to 200 meters (in open areas)
• Puna Hiko: 1 pākahiko Lithium Polymer (kei roto)
• Kei te utu: USB-C
• Nga waahanga motuhake: VOX, LED Flashlight, Key Lock, Shockproof
• Ātete wai: IP65 (Atete Wai)
• Momo Tuner: UHF
• Reanga Manakohia: 3+ Tau

Ataata Hua Whaimana

Tautoko Kiritaki

For any questions or assistance with your QNIGLO walkie talkies, please contact our customer support team. We are available 24/7 and aim to respond within 24 hours.

Tirohia te QNIGLO Store on Amazon mo etahi atu korero.