Kupu Whakataki
This manual provides essential instructions for the safe and effective use of your X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker. Please read this manual thoroughly before assembly and operation, and retain it for future reference.
Image: The X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker, featuring a black padded seat with integrated RGB LED lighting strips along the sides, designed for floor-level gaming and relaxation.
Nga korero haumaru
Kia mau ki nga aratohu haumaru e whai ake nei hei aukati i te whara, i te kino ranei o te hua:
- This product may have a maximum weight capacity of 120 kg (265 lbs). Do not exceed this limit to ensure safe and proper use.
- Kia matara atu i nga tamariki nga rauemi takai katoa.
- Kia mahara kia noho haumaru nga hononga katoa i mua i te whakamahinga.
- Kaua e tukuna te hua ki te wera nui, ki te makuku ranei.
- Avoid placing sharp objects on the chair.
- Use only the provided or recommended power adapters for charging.
Ihirangi mokete
I te whakatuwheratanga o te kete, tirohia koa kei te noho nga waahanga katoa me te kore e pakaru:
- X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker
- Tauira Whakatau USB
- Audio Connection Cable (if applicable)
- Pukapuka Kaiwhakamahi (tenei tuhinga)
Mena kua ngaro, kua pakaru rānei ētahi o ngā taonga, whakapā atu ki te ratonga kiritaki.
Tatūnga
1. Turanga Tuatahi
Place the X Rocker Orbit 2.0 on a flat, stable surface. Ensure there is enough space around the chair for comfortable use and to prevent obstruction of the LED lighting.
2. Charging the Internal Battery
The chair features a built-in rechargeable battery for the Neo Motion LED lighting. Before first use, fully charge the battery.
- Locate the USB charging port on the chair, typically found near the control panel.
- Connect the provided USB charging cable to the chair's USB port.
- Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a power bank (not included).
- Allow the chair to charge until the charging indicator light (if present) signals a full charge. A full charge can provide up to 2 hours of LED operation.
Note: The chair can be used while charging, but for optimal battery life, it is recommended to fully charge before initial use.
3. Audio Connection (if applicable)
If your model includes audio features, connect it to your audio source:
- Hononga Waea: Use the provided audio cable to connect the chair's audio input port to the audio output of your gaming console, TV, or other device.
- Hononga Ahokore (Nihokikorangi): Refer to the operating section for Bluetooth pairing instructions if your model supports it.
Nga Tohutohu Whakahaere
1. Te Whakakaha/Weto
Locate the power button on the control panel. Press and hold for a few seconds to turn the chair's LED lighting and audio (if applicable) on or off.
2. Neo Motion LED Lighting Control
The X Rocker Orbit 2.0 features Neo Motion LED technology with multiple lighting effects.
- Patene Aratau: Press the 'Mode' button (or similar) on the control panel to cycle through the available lighting effects and color options. There are up to 30 different light effects and color options across the full RGB spectrum.
- Mana Tirohanga: If available, use dedicated buttons to adjust the brightness of the LED lights.
3. Audio Control (if applicable)
If your chair has integrated audio, use the control panel to manage sound:
- Mana Rōrahi: Adjust the master volume using the dedicated volume dial or buttons.
- Tauira Nihokikorangi: If your model supports Bluetooth, activate Bluetooth on your device and on the chair (usually by pressing a 'Bluetooth' button or holding the power button). Select "X Rocker Orbit" (or similar) from your device's Bluetooth list to pair.
Te tiaki
Proper maintenance ensures the longevity and performance of your X Rocker Orbit 2.0.
- Te horoi: Wipe the surface of the chair with a soft, damp kakahu. Mō ngā paru uaua, whakamahia he hopi ngawari, kātahi ka murua ki te wai ma,amp kakahu. A ape i te kai horoi, te whakarewa ranei.
- Rokiroki: When not in use, store the chair in a cool, dry place away from direct sunlight.
- Tiaki Pūhiko: To maintain battery health, avoid completely draining the battery frequently. Recharge when the LED lights dim or turn off.
- Whakaha Uepu: Ensure all cables are neatly arranged and not pinched or tangled to prevent damage.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ko nga rama LED e kore e ka. | Kua pau te pākahiko. | Connect the chair to a power source using the USB charging cable and allow it to charge. |
| Ko nga rama LED he pouri. | Te taumata pākahiko iti. | Recharge the chair's battery. |
| No audio (if applicable). | Incorrect audio connection or low volume. | Check all audio cables are securely connected. Ensure the volume on both the chair and the audio source is turned up. If using Bluetooth, re-pair the device. |
| Chair does not rock smoothly. | He mata kore ōrite, he ārai rānei. | Ensure the chair is on a flat, level surface. Check for any objects underneath the chair that might impede rocking motion. |
Whakatakotoranga
- Tauira: Whakawhitiwhiti 2
- Momo Hua: RGB Neo Motion Floor Rocker
- Hangarau LED: Neo Motion RGB (up to 30 effects)
- Puna Hiko: Rechargeable USB (internal battery)
- Battery Life (LED): Tae atu ki te 2 haora (approx.)
- Taumaha Morahi: 120 kg (265 lbs)
- Ahu mōkihi: 74 x 68 x 42 cm
- Taumaha Tūemi: 9.6 kg
- ASIN: B0BVMNW77P
Pūtāhui me te Tautoko
For warranty information, technical support, or to purchase replacement parts, please visit the official X Rocker webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to tohu hoko mo nga kereme whakamana.
Webpae: www.xrockeruk.com (Exoample, tūturu URL may vary by region)