Klipsch Reference Premiere RP-1400SW 14-inch Subwoofer

1. Kupu Whakataki

Mauruuru koe mo te hokoasing the Klipsch Reference Premiere RP-1400SW 14-inch High Excursion Subwoofer. This subwoofer is designed to deliver powerful and accurate low-frequency sound, enhancing your home theater or music listening experience. This manual provides essential information for proper setup, operation, and care of your new subwoofer.

Figure 1.1: Klipsch Reference Premiere RP-1400SW Subwoofer (Grille Removed)

2. Nga Korero Haumaru Nui

Please read all safety instructions before operating this product. Keep these instructions for future reference.

• Puna Hiko: Connect the subwoofer only to a power supply of the type described in the operating instructions or as marked on the appliance.
• Whakahau: Kia tika te hauhautanga. Kaua e ārai i ngā pūaha hauhautanga. Tāutahia kia rite ki ngā tohutohu a te kaihanga.
• wera: Kaua e whakauruhia ki te taha o nga puna wera penei i nga radiators, nga rehita wera, nga umu, me etahi atu taputapu (tae atu ki ampkaiwhakaora) e whakaputa ana i te wera.
• Te wai me te makuku: Kaua e whakamahia tenei taputapu tata ki te wai me te makuku.
• Te horoi: Horoia ki te kakahu maroke anake.
• Ratonga: Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu. Ka hiahiatia he ratonga ina kua pakaru nga taputapu i tetahi huarahi, penei i te taura hiko, te mono ranei kua pakaru, kua maringi te wai, kua taka ranei nga taonga ki roto i te taputapu, kua kitea te taputapu ki te ua, ki te makuku ranei, kaore e mahi noa. , kua tukuna ranei.
• Mea Taumaha: This subwoofer is heavy (85 lbs). Exercise caution when moving to prevent injury.

3. He aha kei roto i te Pouaka

Manatokona kei te noho nga waahanga katoa:

• Klipsch Reference Premiere RP-1400SW Subwoofer
• Waea hiko
• Pukapuka Tohutohu (tenei tuhinga)

4. Tatūnga

4.1 Whakanohoa Subwoofer

The Klipsch RP-1400SW features a front-firing driver and Aerofoil front slot port, allowing for flexible placement within your room. Experiment with different locations to find the optimal bass response for your listening environment. Generally, corner placement can enhance bass output, while placement along a wall can provide a more balanced sound. The shock-absorbing rubber feet help isolate the subwoofer from the floor.

Figure 4.1: Front-Firing Driver and Aerofoil Front Slot Port

Figure 4.2: Subwoofer Design Features (Rounded Corners, Shock-Absorbing Feet)

4.2 Hononga

Your RP-1400SW subwoofer offers both wired and wireless connectivity options.

Figure 4.3: Subwoofer Rear Panel Connections and Controls

1. Wired Connection (RCA/LFE):

   Connect an RCA cable from the LFE output of your AV receiver to the LFE input on the subwoofer's rear panel. If your receiver does not have an LFE output, use a standard RCA stereo cable to connect the receiver's pre-out (subwoofer output) to both the left and right RCA inputs on the subwoofer.

2. Wireless Connection (Optional WA-2 Kit):

   For wireless operation, you can connect your subwoofer with a Klipsch WA-2 Wireless Subwoofer Kit (sold separately). This allows for flexible placement without the need for long RCA cables. Refer to the WA-2 kit's instructions for pairing and setup.

   

   Figure 4.4: Wireless Connectivity with Optional WA-2 Kit
3. Hononga Hiko:

   Once audio connections are made, plug the supplied power cord into the subwoofer's power inlet and then into a suitable wall outlet.

5. Te whakahaere i to Subwoofer

5.1 Mana Whakahaereview

The rear panel of your subwoofer features several controls to fine-tune its performance:

Figure 5.1: Easy-to-Use Controls on Rear Panel

• GAIN (Rōrahi): Ka whakarerekē i te taumata putanga o te subwoofer. Tīmata ki te tautuhinga iti, ka piki haere mārire kia uru pai te oro o te papa ki ō kaikorero matua.
• LOW-PASS (Crossover): This control sets the upper frequency limit for the subwoofer. If using an AV receiver with LFE output, set this to LFE (or bypass if available on your receiver). If connecting via stereo RCA, adjust this to blend with your main speakers' low-frequency cutoff.
• WĀHANGA (0°/180°): Adjusts the phase of the subwoofer output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass.
• POWER (ON/AUTO/OFF):
  • ON: Ka noho tonu te subwoofer ki runga.
  • MOTO: Subwoofer automatically turns on when an audio signal is detected and enters a low-power standby mode after a period of inactivity.
  • WATE: Kua whakawetohia te pūoro iti.

  The 1/2-watt standby mode in AUTO setting ensures exceptional efficiency and reduces energy costs.

5.2 Te Whakakā me te Whakatikatika Tuatahi

1. Me whakarite kia mau nga hononga katoa.
2. Set the GAIN control to its minimum position.
3. Set the LOW-PASS control to LFE if using an AV receiver, or to a suitable frequency (e.g., 80Hz) if connecting via stereo RCA.
4. Set the PHASE switch to 0°.
5. Set the POWER switch to AUTO.
6. Play some audio with significant bass content. Gradually increase the GAIN control until the subwoofer output blends with your main speakers.
7. Experiment with the PHASE switch (0° vs. 180°) to determine which setting provides the most impactful and seamless bass response in your listening position.

For optimal performance, consider using your AV receiver's automatic room correction system (if available) after initial setup.

5.3 Product Video: Reference Premiere Subwoofers

6. Tiaki

To ensure the longevity and optimal performance of your Klipsch RP-1400SW subwoofer, follow these simple maintenance guidelines:

• Te horoi: Dust the cabinet regularly with a dry, soft cloth. Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the ebony vinyl finish.
• Turanga: Avoid placing the subwoofer in direct sunlight or near heat sources, which can cause discoloration or damage to the cabinet.
• Whakahau: Me whakarite ko te muri amplifier panel has adequate airflow. Do not block the heat sink.
• Tunu: The durable woven cloth grille can be gently cleaned with a soft brush or vacuum cleaner attachment to remove dust.

7. Te Raru

If you experience issues with your subwoofer, consult the following table for common problems and solutions:

If the problem persists after trying these solutions, please contact Klipsch customer support.

8. Whakatakotoranga

Key technical specifications for the Klipsch Reference Premiere RP-1400SW Subwoofer:

Figure 8.1: Subwoofer Dimensions

9. Raihana me te Tautoko

9.1 Nga Korero Whakaputanga

The Klipsch Reference Premiere RP-1400SW Subwoofer comes with a limited warranty:

• Hikohiko: E rua (2) tau
• Woofer, Cabinet, and Non-Electrical Mechanics: E rima (5) tau

Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the official Klipsch webpae, whakapā atu ranei ki te tautoko a te kaihoko.

9.2 Tautoko Kiritaki

For further assistance, technical support, or warranty inquiries, please visit the official Klipsch website or contact their customer service department. Contact details can typically be found on the Klipsch website under the "Support" or "Contact Us" section.