1. Kupu Whakataki
Thank you for choosing the APLOS AP20 Scuba Dive Light. This manual provides essential information for the safe and effective operation, maintenance, and care of your dive light. Please read it thoroughly before use and retain it for future reference.
Image 1.1: The APLOS AP20 Scuba Dive Light, a compact and powerful underwater flashlight.
2. Nga Hua o te Hua
- Tirohanga Teitei: Delivers a maximum of 2000 lumens, providing illumination up to 200 meters (656 feet) underwater.
- Mahi ngawari: Features a user-friendly one-touch magnetic switch for easy control.
- IPX8 Whakatauranga parewai: Designed for underwater use up to 100 meters (328 feet) with enhanced sealed O-rings for superior water resistance.
- Hanga Roa: Crafted from aircraft-grade aluminum alloy with a tempered glass lens, offering resistance to oxidation, abrasion, and saltwater corrosion.
- Nga tono maha: Suitable for diving, fishing, camping, mountain climbing, tactical defense, and night fishing.
Image 2.1: Illustration highlighting the IPX8 waterproof capability up to 100m (328ft) and a beam distance of 210m (689ft).
Image 2.2: Close-up of the APLOS AP20 showing its compact body and the 1 XM L2-2000 lumens LED bulb with over 50,000 hours lifespan.
3. Ihirangi mokete
Upon opening your APLOS AP20 Scuba Dive Light package, please verify that all the following items are included:
- 1 x APLOS AP20 Dive Flashlight
- 1 x Rechargeable Battery (pre-installed or separate)
- 1 x Kaituku USB
- 1 x Tauira USB
- 1 x Tira Wari
- 4 x Waterproof O-rings (spare)
- 1 x Manual Kaiwhakamahi (tenei tuhinga)
Image 3.1: All items included in the APLOS AP20 Scuba Dive Light package, laid out next to the product box.
4. Product Structure and Components
Familiarize yourself with the different parts of your APLOS AP20 dive light:
Whakaahua 4.1: Pahū view diagram of the APLOS AP20 showing its main components: AL-6061-T6 aircraft-grade aluminum body, high transparent tempered glass lens, one-touch switch, and waterproof O-rings.
- Upoko: Contains the LED emitter and tempered glass lens.
- Tinana: Houses the battery and internal circuitry. Made from AL-6061-T6 aircraft-grade aluminum with military regulations III hard anodized finish for abrasion and seawater corrosion resistance.
- One-Touch Magnetic Switch: Located on the body for easy mode selection and power control.
- Pōtae hiku: Secures the battery and provides a point for the wrist strap.
- Waterproof O-rings: Two O-rings ensure a watertight seal for underwater operation.
5. Tatūnga me te Whakatau
5.1 Tāuta Pūhiko
- Unscrew the tail cap of the dive light by turning it counter-clockwise.
- Insert the rechargeable battery with the positive (+) terminal facing towards the head of the flashlight.
- Carefully screw the tail cap back on clockwise until it is fully tightened. Ensure the O-rings are properly seated to maintain the waterproof seal.
5.2 Te Whakataki i te Pūhiko
- Remove the battery from the dive light.
- Place the battery into the provided USB charger, ensuring correct polarity.
- Connect the USB charger to a power source using the supplied USB cable.
- Ko te rama tohu kei runga i te riihi ka whakaatu i te mana o te utu (hei tauira, he whero mo te utu, he kakariki mo te whakakii katoa).
- Once fully charged, disconnect the charger and remove the battery.
6. Mahi
6.1 Te Whakamahinga Taketake
- Whakakā/Weto: Rotate the magnetic switch to turn the light on or off.
- Kōwhiringa Aratau: Continue rotating the magnetic switch to cycle through different brightness modes (if applicable). The APLOS AP20 features a simple one-touch magnetic switch for ease of use.
Video 6.1: This video demonstrates the APLOS AP20 Scuba Dive Light, showcasing its components, waterproof capabilities, and simple magnetic switch operation. It also shows the light in an underwater environment.
6.2 Underwater Use
Before each dive, ensure the tail cap is securely tightened and the O-rings are clean and properly lubricated to maintain the IPX8 waterproof rating. The light is designed to operate reliably up to 100 meters (328 feet) underwater.
7. Tiaki
- Whai muri i ia ruku: Rinse the dive light thoroughly with fresh water to remove salt, sand, and other debris.
- Tiaki O-mowhiti: Periodically inspect the O-rings for any signs of damage, cracks, or wear. Clean them and apply a thin layer of silicone grease to maintain their elasticity and waterproof seal. Replace damaged O-rings immediately using the provided spares.
- Tiaki Pūhiko: Store the battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to approximately 50% capacity every few months to prolong its lifespan.
- Te horoi: Wipe the body of the flashlight with a soft, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Rokiroki: Store the dive light in a dry, cool place away from direct sunlight and extreme temperatures.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Kua mate te pākahiko, kua he ranei te whakaurunga. | Charge the battery or re-install it with correct polarity. |
| Ka whiti te marama, ka pouri ranei. | He iti te pākahiko, he hononga kore ranei. | Recharge the battery. Ensure the tail cap is fully tightened. |
| Te urunga wai. | Ngā mowhiti-O kua pakaru, kua kore rānei i te tika te whakanoho. | Inspect and clean O-rings. Apply silicone grease. Replace damaged O-rings. Ensure tail cap is securely tightened. |
| Switch is stiff or unresponsive. | Debris or corrosion in the switch mechanism. | Rinse the switch area with fresh water. If problem persists, contact customer support. |
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tauira | AP20 |
| Putanga Maama | 2000 Lumens (Mōrahi) |
| Momo Puna Maama | LED (1 x XM L2) |
| Tawhiti Kurupae | Tae atu ki te 210 mita (689 putu) |
| Whakatauranga parewai | IPX8 (Submersible up to 100 meters / 328 feet) |
| Puna Mana | Pūhiko Rechargeable |
| Rauemi | Aircraft-grade Aluminum Alloy (AL-6061-T6) |
| Āhuahira Motuhake | Durable, Rechargeable |
10. Pūtāhui me te Tautoko
APLOS provides a worry-free 24-month warranty for the AP20 Scuba Dive Light. For any questions, concerns, or warranty claims, please contact APLOS customer service.
Mōhiohio Whakapā:
- Īmēra: sales@aploslight.com
- Webpae: www.aploslight.com
- Waea: 0086 - 15361877162
- Wāhi noho: 89 Hao 3 Zhuang 3433 Shi, Shuang Gao Lu, Gao Chun Jing Ji Kai Fa Qu, Nan Jing Shi, Haina 2113166
Image 10.1: Back of the product packaging showing manufacturer contact details and compliance certifications (FC, CE, RoHS, UKCA).