NutriBullet GO Cordless Blender Instruction Manual

Kupu Whakataki

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

Nga Tiaki Nui

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, injury, or property damage.

• Read all instructions before operating the NutriBullet GO.
• Tiakina te taputapu me tana taura kia kore e taea e nga tamariki.
• Kaua e rukuhia te turanga motuka ki te wai, ki tetahi atu wai ranei.
• Avoid contact with moving parts. Keep hands and utensils out of the blending cup while blending to prevent injury.
• Do not blend hot liquids, as pressure buildup can cause the cup to burst.
• Ensure the blade assembly is securely attached to the cup and the cup is properly locked onto the motor base before operating.
• Do not operate the blender if the blade assembly is damaged or if the motor base has been dropped or damaged.
• Use only NutriBullet authorized accessories and replacement parts.
• Unplug the USB charging cord when not in use and before cleaning.

He aha kei roto

Your NutriBullet GO Cordless Blender package includes:

• (1) Motor Base
• (2) 13oz Cups
• (2) To Go Lids
• (1) Blade Cover
• (1) Tauira Whakatau USB
• User Guide with Recipes

Image: All components included with the NutriBullet GO Cordless Blender.

Tatūnga

Te Whakataki i te Pūhiko

1. Connect the USB charging cord to the charging port on the motor base.
2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

Huihuinga

1. Me whakarite kua kī katoa te turanga o te motuka.
2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
3. Securely twist the blade assembly onto the cup until it is tightly sealed.
4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

Nga Tohutohu Whakahaere

Whakaranu

1. After assembly, press the power button on the motor base to begin blending.
2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
3. Avoid blending continuously for more than 30 seconds to prevent overheating.
4. If the blender stops, gently shake the unit to redistribute ingredients and restart.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

Whai muri i te Whakaranu

1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
2. Carefully unscrew the blade assembly from the cup.
3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

Te tiaki me te horoi

Cleaning the Blade and Cups

1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
2. Whakamahia he paraihe hei horoi marie i te taha o ngā mata.
3. The cups and lids are top-rack dishwasher safe.

Cleaning the Motor Base

1. Horoia te turanga motuka me te panuiamp kakahu.
2. Kaua rawa e rumakina te turanga o te motuka ki te wai, ki tētahi atu wai rānei.
3. Me whakarite kua maroke te tauranga utu i mua i te utu.

Raparongoā

Kare te Pūhanumi e whakakā:

• Me whakarite kua kī katoa te turanga o te motuka.
• Verify the cup and blade assembly are securely twisted onto the motor base. The blender has a safety mechanism that prevents operation if not properly assembled.

Kaore i te pai te whakakotahi o nga kai:

• Add more liquid to the mixture.
• Cut larger ingredients into smaller pieces.
• Kaua e whakakī rawa te kapu ki tua atu i te rārangi MAX.
• Blend in shorter bursts and gently shake the unit.

Indicator light is red:

• This may indicate overheating. Allow the unit to cool down for at least 15 minutes before attempting to blend again.
• It could also indicate a low battery. Recharge the unit.

Whakatakotoranga

Nga korero Whakaputanga

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet webpae mo nga tikanga me nga tikanga taipitopito. Puritia to tohu hoko mo nga kereme whakamana.

Tautoko Kiritaki

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet webpae, whakapā atu ranei ki te ratonga kiritaki.

Whaimana Webpae: www.nutribullet.com