Nga pukapuka pukapuka+

Pūnaha TELE TS6105

TELE System TS6105 DVB-T2 HEVC Digital Terrestrial Decoder

Pukapuka Kaiwhakamahi

Kupu Whakataki

This manual provides essential information for the proper installation, operation, and maintenance of your TELE System TS6105 DVB-T2 HEVC Digital Terrestrial Decoder. Please read these instructions carefully before using the device to ensure optimal performance and safety.

The TS6105 decoder is designed to receive DVB-T2 HEVC 10-bit digital terrestrial television broadcasts, offering Full HD resolution up to 1080p@60Hz. It includes features such as automatic channel scanning (AUTOSCAN), an Electronic Program Guide (EPG), and multimedia playback capabilities via USB.

Ihirangi mokete

Me mohio kei roto katoa nga mea kei roto i te kete:

Mua me te taha view o te pūwhakamātautau TELE System TS6105

This image shows the compact design of the TS6105 decoder, highlighting the TELE System logo, model number TS6105 DVB-T2 HEVC, Dolby Audio, and HDMI branding on the front, with ventilation on the side.

Tatūnga

1. Te Hononga i te Pūwhakamātautau

Before connecting, ensure your television and the decoder are turned off.

Whakamuri view o te pūwhakamātautau TELE System TS6105 e whakaatu ana i ngā tauranga hononga

This image displays the rear panel of the TS6105 decoder, featuring the ANT IN, ANT OUT, COAXIAL, HD OUT (HDMI), SCART, and DC IN ports for power and signal connections.

  1. Hononga Antenna: Honoa tō taura pūihi whenua ki te ANT KI port on the rear of the decoder. If you wish to loop the signal to another device, connect a coaxial cable from the ANTOKO PUTA port to the next device.
  2. Hononga Pouaka Whakaata (HDMI): For the best picture quality, connect an HDMI cable from the HD PUTA port on the decoder to an available HDMI input on your television. Select the corresponding HDMI input on your TV.
  3. Hononga Pouaka Whakaata (SCART): If your TV does not have an HDMI input, connect a SCART cable from the SCART te hononga i runga i te wetewaehere ki te tāuru SCART i runga i tō pouaka whakaata.
  4. Hononga Hiko: Tūhono i te pūurutau hiko ki te DC IN port on the decoder, then plug the adapter into a wall outlet.

2. First-Time Installation and Channel Scan

After connecting the decoder and turning on your TV, switch on the decoder. The first time you use it, an installation wizard will guide you through the initial setup.

  1. Tīpakonga Reo: Choose your preferred language using the remote control's navigation buttons and press OK.
  2. Tīpako Whenua: Select your country. This helps the decoder apply the correct regional settings for channel scanning.
  3. AUTOSCAN: The decoder will automatically initiate the AUTOSCAN function. This process searches for all available digital terrestrial channels and organizes them logically using the LCN (Logical Channel Number) system. This may take several minutes.
  4. Whakaoti: Once the scan is complete, the decoder will save the channels and display the first available channel.

Operating the Decoder

Mana Mamao Neke Atuview

TELE System TS6105 remote control

This image presents the remote control for the TS6105 decoder, featuring power, mute, channel, volume, navigation, EPG, media playback, and numeric buttons for comprehensive control.

Aratohu Papatono Hiko (EPG)

Pehia te EPG paatene i runga i te mana mamao ki view the Electronic Program Guide. The EPG provides information about current and upcoming programs for all channels. You can navigate through channels and time slots to see program details.

Multimedia Player (USB)

Ka taea e te TS6105 te purei i ngā rongorau maha files mai i te taputapu rokiroki USB.

  1. Insert a USB drive into the USB port on the decoder.
  2. Pehia te USB button on the remote control or navigate to the multimedia section via the MENU.
  3. Select the type of media you wish to play (Music, Photo, Video).
  4. Tirotirohia tō files ka pēhi OK ki te takaro.

Pause TV / Timeshift

The Pause TV / Timeshift function allows you to pause live television and resume viewing later. This feature requires a USB storage device connected to the decoder.

  1. I a koe e mātaki ana i tētahi hōtaka, pēhi i te pātene TATAHI button (usually represented by two vertical bars) on the remote control.
  2. Hei whakaara ano i te purei, pehia te TAKARO button (usually represented by a right-pointing triangle).
  3. You can also fast-forward or rewind using the respective buttons.

Te tiaki

Te horoi

To clean the decoder, ensure it is unplugged from the power outlet.

Whakahōu Pūmanawa

Tirohia i ia wa i te kaihanga website for available software updates. Updates can improve performance, add new features, or resolve issues. Follow the instructions provided with the update file āta.

Raparongoā

If you encounter problems with your decoder, refer to the following common issues and solutions:

Whakatakotoranga

Pūtāhui me te Tautoko

Nga korero Whakaputanga

This product comes with a manufacturer's warranty of 2 years. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Tautoko Kiritaki

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact TELE System customer support. Refer to the official TELE System website or product packaging for the most up-to-date contact information.