Thrustmaster eSwap S Wired Pro Controller User Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Thrustmaster eSwap S Wired Pro Controller. Designed for competitive gaming, this controller offers advanced modularity and precision for an enhanced gaming experience on Xbox Series X/S and PC.

Whakaahua 1: Mua view of the Thrustmaster eSwap S Wired Pro Controller, showcasing its modular design and detachable mini-sticks.

2. Ihirangi mokete

Me whakarite kei roto i tō kete hua ngā tūemi katoa e whai ake nei:

• eSwap S Pro Controller
• Tauira USB
• Pukapuka Kaipupuri (tenei tuhinga)

Whakaahua 2: Whakamuri view of the controller, highlighting the USB cable connection point and programmable back paddles.

3. Tatūnga

Follow these steps to set up your Thrustmaster eSwap S Wired Pro Controller:

1. Honoa te Taura USB: Plug the USB-C end of the provided cable into the port on the top of the controller.
2. Hono atu ki te Papatohu/Rorohiko: Plug the USB-A end of the cable into an available USB port on your Xbox Series X/S console or PC.
3. Āhukahuka Pūnaha: Your system should automatically detect and install the necessary drivers for the controller.
4. Modular Component Installation (Optional): The eSwap S controller features hot-swap technology for its mini-sticks and D-pad. To install or replace a module, align it with the corresponding slot on the controller and gently push until it clicks into place. No tools are required.

Figure 3: Illustration of the hot-swap technology, demonstrating how mini-stick modules can be easily removed and replaced.

4. Nga waahanga matua

• Hoahoa Tauira: The controller allows for tool-free replacement of mini-stick modules, offering flexibility and extended lifespan.
• Enhanced Mini-Sticks: Equipped with next-generation S5 NXG mini-sticks, providing a lifespan of 2 million activations and improved precision through advanced dead zone management.
  

  Figure 4: Visual highlighting the high precision and durability of the mini-sticks.
• Ergonomic Mechanical D-pad: A newly designed D-pad ensures superior precision, comfort, and control, particularly for diagonal inputs.
  

  Figure 5: Focus on the D-pad, emphasizing its responsiveness for diagonal movements.

• Super-Responsive Mechanical Buttons: Action buttons are significantly faster than standard membrane buttons, with a lifespan exceeding 5 million activations and a reduced activation distance of 0.01 inches (0.3 mm).

5. Nga Tohutohu Whakahaere

Once connected, the Thrustmaster eSwap S Wired Pro Controller functions as a standard Xbox or PC controller. Specific advanced functionalities and button remapping can be managed via the dedicated Thrustmaster software (available for download from the official Thrustmaster webpae).

Refer to the software's user interface for detailed instructions on:

• Button remapping (including the back paddles)
• Adjusting mini-stick dead zones
• Nga whakatikatika tairongo
• Whakahoutanga firmware

6. Tiaki

Hei whakarite i te roa o te ora me te mahi tino pai o tō pūmana, whai i ēnei aratohu tiaki:

• Te horoi: Whakamahia he kakahu ngohengohe, maroke hei muru i te kaiwhakahaere. Mo te paru maro, paku dampen te kakahu ki te wai. A ape i te whakamahi i nga matū kino, i nga horoi horoi ranei.
• Rokiroki: Store the controller in a clean, dry place away from direct sunlight and extreme temperatures.
• Tiaki taura: Avoid sharp bends or kinks in the USB cable. Always grasp the plug, not the cable, when disconnecting.
• Ngā Wāhanga Āhuahira: When swapping modules, handle them gently to avoid damaging the connectors.

7. Te Raru

If you encounter issues with your Thrustmaster eSwap S Wired Pro Controller, try the following solutions:

• Kāore i te Mōhiotia te Kaiwhakahaere:
  • Me whakarite kei te hono tika te taura USB ki te kaiwhakahaere me te papatohu/rorohiko.
  • Ngāna ki te hono i te pūmana ki tētahi atu tauranga USB.
  • Tīmata anō i tō papatohu, i tō PC rānei.
  • Check for any pending system updates for your console or PC.
• Buttons/Mini-sticks Unresponsive:
  • Ensure modular components (mini-sticks, D-pad) are correctly seated and clicked into place.
  • Clean around the buttons and mini-sticks to remove any debris.
  • Update the controller's firmware using the Thrustmaster software.
• Inaccurate Inputs:
  • Calibrate the controller through your system's settings or the Thrustmaster software.
  • Adjust dead zone settings in the Thrustmaster software if mini-sticks exhibit drift.

Mena ka mau tonu te raruraru, tirohia te wāhanga Pūtāhui me te Tautoko mō ētahi atu āwhina.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Thrustmaster offers a one-year warranty on parts and labor for all its products, effective from the date of purchase.

For any product issues, technical support, or questions not covered in this manual, please feel free to reach out to the official Thrustmaster Customer Support. You can find contact information and additional resources, including the full PDF user manual, on the official Thrustmaster website or through the links provided with your product purchase.

Rauemi taapiri:

• Aratohu Kaiwhakamahi (PDF): Tikiake Aratohu Kaiwhakamahi
• Pukapuka Kaiwhakamahi (PDF): Tikiake Manual Kaiwhakamahi