Kupu Whakataki
This instruction manual provides detailed guidance for the assembly, safe operation, and maintenance of your ZINUS Shalini Upholstered Fabric Bed Frame. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and to maximize the lifespan of your product. Keep this manual for future reference.
Nga korero haumaru
- Always use a mattress with a thickness of 15 cm (6 inches) or more to ensure the longevity and structural integrity of the bed frame.
- Do not use a futon directly on the bed frame. Direct body pressure on the slats may lead to damage.
- Avoid jumping on the bed frame or concentrating weight on a single point, as this can cause damage to the frame.
- Assembly is recommended for two or more adults.
- During assembly, ensure sufficient space and protect the floor with a mat or similar material.
- This product is intended for household furniture use. Do not use it for purposes other than its original intent, as this may lead to unexpected accidents or injuries.
Ihirangi mokete
Before beginning assembly, verify that all parts listed below are present and undamaged. Some screw parts may be pre-installed on the main unit; please check in advance.
Image: All components of the bed frame laid out for assembly, including the headboard, side rails, center support, and hardware.
Refer to the assembly video for a visual guide to all included parts.
Nga Tohutohu Huihuinga
Estimated assembly time: 30-50 minutes (2 adults recommended). All necessary tools are included.
Step 1: Attach Headboard Legs
Secure the headboard legs to the main headboard panel using the provided bolts and washers. Ensure they are tightly fastened.
Image: A person attaching the headboard legs to the headboard using an Allen wrench, bolts, and washers.
Hipanga 2: Huihuia nga Raera Taha
Connect the two sections of each side rail and attach the corner brackets and support legs. Ensure all connections are secure.
Image: A person attaching a corner bracket to a side rail section using bolts and an Allen wrench.
Step 3: Connect Side Rails to Headboard
Align the side rails with the headboard legs and secure them using the provided hardware. Repeat for both sides.
Image: A person securing a side rail to a headboard leg using an Allen wrench.
Hipanga 4: Tāutahia te Pae Tautoko Pokapū
Assemble the center support bar and attach it to the side rails. This provides crucial stability for the bed frame.
Image: A person fastening the center support bar to the bed frame using an Allen wrench.
Step 5: Place Slats
Unroll the wooden slats and place them evenly across the bed frame. Secure them in place using the provided fasteners. The slats include silent tape for noise reduction.
Image: A person securing a wooden slat to the bed frame with a plastic fastener.
Aratohu Ataata Huihuinga
For a comprehensive visual guide, please watch the official assembly video:
Video: Detailed assembly instructions for a fabric bed frame, demonstrating each step from unboxing to final setup. This video is provided by YaheetechJP.
Nga Tohutohu Whakahaere
Once assembled, your ZINUS Shalini bed frame is ready for use. Place your mattress (minimum 15cm thickness recommended) directly onto the wooden slats. The design provides robust support and ventilation for your mattress.
Image: A fully assembled ZINUS Shalini bed frame in light gray with a diamond-quilted headboard, complete with a mattress and bedding, ready for use.
The bed frame features 16cm of under-bed storage space, ideal for storing clothes or other items in bins or containers.
Image: A ZINUS Shalini bed frame with a mattress and bedding, highlighting the available space underneath the bed for storage.
Te tiaki
To keep your bed frame in optimal condition:
- Te horoi: Wipe the frame with a dry cloth to remove dust. For fabric parts, use a soft brush or vacuum cleaner to remove dust and debris. Spot clean any stains with a mild fabric cleaner, testing on an inconspicuous area first.
- Takitaki auau: Tirohia ngā pūtu me ngā hononga katoa i ia wā, i ia wā, kia mau tonu ai. Whakamaua anō mēnā e tika ana kia mau tonu ai te pumau, kia kore ai hoki e tangi te tangi.
- Whakahau: Ensure adequate air circulation around and under the bed to prevent moisture buildup, especially in humid environments.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| E wiri ana, e haruru ana rānei te anga moenga. | Nga tutaki, nga hononga ranei. | Check and re-tighten all bolts and screws using the provided Allen wrench. Ensure all parts are correctly aligned. |
| Slats are moving or making noise. | Slats not properly secured or silent tape worn. | Ensure all slats are correctly seated in their positions and fasteners are tight. The slats are equipped with silent tape to minimize noise. |
| Kua ngaro nga waahanga kua pakaru ranei i te taenga mai. | He kino te hanga, he kino ranei te kaipuke. | Contact ZINUS customer support immediately with your purchase details for assistance. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tauira | AJ-FDPB-LG-D |
| Rahi | Ruarua |
| Tarahinga Hua Hua (L x W x H) | 195 cm x 140 cm x 102.7 cm (with headboard) |
| Bed Frame Dimensions (L x W x H) | 195 cm x 140 cm x 35 cm (without headboard) |
| Teitei o te Rokiroki i raro i te moenga | 16 cm |
| Taumaha Hua | 36.8 kg |
| Maximum Recommended Weight Capacity | 180 kg |
| Rauemi Matua | Steel, Plywood, Polyester, High-density Urethane |
| Nga papa | Wooden slats with silent tape |
| Tae | Kerei Maama |
| Kāhua | Diamond Quilt Upholstered |
Image: A diagram illustrating the dimensions of the Shalini Fabric Bed Frame for Single, Semi-Double, and Double sizes, including height, width, and length measurements.
Nga korero Whakaputanga
Ka whakaratohia e ZINUS he 5 tau te whakamana a te kaiwhakanao for this product. This warranty covers manufacturing defects for both mattresses and frames, ensuring peace of mind for our customers. Please retain your proof of purchase for warranty claims.
Image: A green circular badge indicating "WARRANTY 5 YEAR QUALITY ASSURANCE" with the ZINUS logo.
Tautoko Kiritaki
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact ZINUS customer support. For the most up-to-date contact information, please visit the official ZINUS webpaetukutuku, tirohia rānei ō tuhinga hoko.
Online resources and FAQs may also be available on the ZINUS brand store page: Toa Waitohu ZINUS
