Pukapuka Kaiwhakamahi mō te Pātene PoE Adtran NetVanta 1560-48-Port

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADTRAN NetVanta 1560-48-Port, 740 Watt PoE Switch (Model 17108148PF2). This device is a fully managed rack-mountable Ethernet switch designed for enterprise-class networking, offering 48 PoE+ ports and 4 10-Gigabit SFP+ ports for high-speed connectivity. It is suitable for powering network devices such as IP phones, security cameras, and wireless access points.

2. Nga korero haumaru

Kia mau ki ngā mahi ārai haumaru e whai ake nei hei ārai i ngā whara me ngā pakaru o ngā taputapu:

• Me whakarite te turanga tika o te taputapu.
• Do not operate the switch in environments with excessive moisture or extreme temperatures.
• Use only the power supply provided or specified by the manufacturer.
• A ape i te arai i nga whakatuwheratanga hau kia kore e wera rawa.
• Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.

3. Ihirangi mokete

Manatokohia kei roto i to kete nga mea e whai ake nei:

• ADTRAN NetVanta 1560-48-Port PoE Switch (Model 17108148PF2)
• Waea hiko
• Kete Whakamau Whatanga
• Tuhinga (Arahi Timata Tere, Moohiohio Haumaru)

Mena kua ngaro, kua pakaru rānei tētahi o ngā taonga, whakapā atu ki tō kaihoko tonu atu.

4. Whakaahuatanga Tinana

The NetVanta 1560-48 is a standard 1U rack-mountable unit. Its front panel features network ports and status indicators, while the rear panel typically includes the power input and cooling fans.

4.1 Paewhiri Mua

Figure 1: Front Panel of the NetVanta 1560-48 Switch

This image displays the front panel of the Adtran NetVanta 1560-48-Port PoE Switch. It features 48 RJ45 Ethernet ports, arranged in two rows, and four 10-Gigabit SFP+ uplink ports on the right side. Status indicator LEDs (Power, System, Link/Act, Speed, PoE) are visible on the left, along with a console port and a USB port.

4.1.1 Tauranga

• 48 x 10/100/1000Base-T Ethernet Ports: RJ45 connectors supporting Power over Ethernet Plus (PoE+).
• 4 x 10-Gigabit SFP+ Ports: For high-speed fiber uplink connections.
• Tauranga Papatohu: RJ45 for local management access.
• Tauranga USB: For firmware upgrades or configuration backup/restore.

4.1.2 Tohu LED

• Arahina hiko: Ka tohu i te mana mana.
• Arahina Pūnaha: Ka tohu i te mana whakahaere o te punaha.
• Hononga/Mahi LED (ia tauranga): He tohu hononga whatunga me te mahi.
• Ngā rama tere (mō ia tauranga): Indicates connection speed (e.g., 100Mbps, 1Gbps).
• PoE LED (ia tauranga): Indicates PoE status for the respective port.

5. Tatūnga me te Tāuta

Follow these steps to properly install and connect your NetVanta 1560-48 switch.

5.1 Whakapiki Rack

1. Attach the provided rack-mount brackets to the sides of the switch using the included screws.
2. Secure the switch into a standard 19-inch equipment rack using appropriate rack screws.

5.2 Hononga Hiko

1. Connect the power cord to the AC power inlet on the rear panel of the switch.
2. Monohia tetahi pito o te taura hiko ki tetahi putanga hiko kua oti te tu.
3. Me manatoko kei te mura te rama hiko i te papa o mua.

5.3 Hononga Whatunga

1. Connect Ethernet cables from your network devices (e.g., computers, IP phones, access points) to the RJ45 ports on the switch.
2. For high-speed uplinks, insert compatible SFP+ transceivers into the SFP+ ports and connect fiber optic cables.
3. Observe the Link/Act and Speed LEDs to confirm successful connections.

6. Nga Tohutohu Whakahaere

The NetVanta 1560-48 is a managed switch, offering various configuration and monitoring options.

6.1 Te Urunga Tuatahi

The switch can be accessed via a Command Line Interface (CLI) through the console port or via a web-based Graphical User Interface (GUI).

• Urunga CLI: Connect a serial cable from your computer to the switch's console port. Use a terminal emulation program (e.g., PuTTY) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
• Web Urunga GUI: By default, the switch may obtain an IP address via DHCP or have a default static IP. Refer to the Quick Start Guide for the default IP address or DHCP discovery method. Access the GUI by entering the switch's IP address into a web pūtirotiro.

6.2 Whirihoranga Taketake

Upon initial access, it is recommended to:

• Hurihia te kupuhipa kaiwhakahaere taunoa.
• Configure the management IP address.
• Tautuhia te wa me te ra o te punaha.
• Enable necessary management protocols (e.g., SNMP, SSH, HTTPS).

6.3 PoE Operation

The switch provides 740 Watts of total PoE+ power. Connected PoE-compatible devices will automatically receive power upon connection, provided the port is enabled for PoE and sufficient power is available.

• Monitor PoE status via the front panel LEDs or the management interface.
• Configure PoE settings (e.g., power priority, power limits) through the switch's management interface.

7. Tiaki

Mā te tiaki auau ka tino pai te mahi me te roa o te ora o tō pana.

7.1 Whakahoutanga Firmware

Tirohia te tautoko a ADTRAN i ia wā website for the latest firmware versions. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware package for a safe update process.

7.2 Te horoi

• Me whakarite kua whakawetohia te pana, ā, kua momotu hoki i te pūtake hiko i mua i te horoinga.
• Whakamahia he kakahu ngohengohe, maroke hei muru i te taha waho o te pana.
• Use compressed air to clear dust from ventilation openings and ports.
• Kaua e whakamahia te horoi horoi wai, te horoi rererangi ranei.

7.3 Nga Whakaaro Taiao

Maintain the operating environment within specified temperature and humidity ranges to prevent hardware failure.

8. Te Raru

Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.

8.1 Karekau he Mana

• Tohu: Kua kati te LED Hiko.
• Mahi:
  • Manatokona kei te hono mau te aho hiko ki te pana me te putanga hiko.
  • Tirohia te putanga hiko me tetahi atu taputapu kia mohio kei te mahi.
  • Me whakarite kei te tūranga 'ON' te pana hiko (mēnā kei reira).

8.2 Kāore he Hononga Whatunga

• Tohu: Link/Act LED for a port is off.
• Mahi:
  • Me whakarite kei te hono tika te taura Ethernet ki ngā pito e rua.
  • Whakamātauria he taura Ethernet rerekē.
  • Manatokohia kei te noho te taputapu hono me te mahi tika.
  • Check port configuration in the switch's management interface.

8.3 PoE Device Not Powering On

• Tohu: PoE-compatible device does not receive power.
• Mahi:
  • Verify the device is PoE-compatible (802.3af/at).
  • Check the PoE LED for the port; if off, ensure PoE is enabled for that port in the switch configuration.
  • Ensure the total PoE power budget (740W) of the switch is not exceeded.
  • Ngāna ki te hono i te pūrere ki tētahi atu tauranga PoE.

9. Whakatakotoranga

Key technical specifications for the ADTRAN NetVanta 1560-48-Port PoE Switch:

10. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the official ADTRAN website or contact your authorized ADTRAN reseller. Keep your purchase receipt for warranty claims.

Tautoko ADTRAN: www.adtran.com/support