Pukapuka Tohutohu mō te Pūoko Nekehanga Ngaruiti LEDONE

1. Hua Neke Atuview

The LEDONE Microwave Motion Sensor is designed for commercial lighting applications, offering advanced motion detection and 0-10V dimming capabilities. This sensor provides reliable performance across a wide range of environmental conditions, contributing to energy efficiency and automated lighting control.

Mua view of the LEDONE Microwave Motion Sensor, a white rectangular device with a small black sensor window and a white adjustment knob, with wires extending from one end.

Whakaahua 1: Mua view of the LEDONE Microwave Motion Sensor.

Āhuatanga matua:

0-10V Moamamaru: Compatible with most popular dimmers for commercial projects.
360° Wide Angle Detection: Detects movement up to 20 feet from any angle.
Stable and Reliable: Operates effectively in temperatures from -40°F to 158°F.
Tiaki Pungao: Automatic on/off functionality based on detected movement.

2. Tatūnga me te Tāuta

Proper installation is crucial for optimal performance. This device is designed for wall mount installation and requires a corded electric connection. Consult a qualified electrician for wiring if you are unfamiliar with electrical installations.

Te taha view of the LEDONE Microwave Motion Sensor showing multiple colored wires (red, black, white, grey, purple) extending from one end, indicating electrical connections.

Whakaahua 2: Taha view of the sensor with wiring connections.

Hipanga Tāuta:

Momotu Hiko: Ensure power to the installation area is turned off at the circuit breaker before beginning any wiring.
Whakapiki: Securely mount the sensor to a wall using appropriate hardware. Ensure the sensor has an unobstructed view o te waahi kitea.
Waea waea: Connect the sensor to the power supply and lighting fixture according to local electrical codes and the wiring diagram provided with the product packaging. The sensor supports 0-10V dimming; ensure proper connections for this functionality if desired.
Hononga Hiko: Once all connections are secure, restore power to the circuit.
Whakamātautau Tuatahi: Perform an initial test to ensure the sensor powers on and the connected lights respond.

Whirihoranga:

The sensor can be configured using either DIP switches or a remote control (sold separately). Refer to the specific instructions included with your product for detailed settings related to detection sensitivity, hold time, and daylight harvesting.

3. Nga Tohutohu Whakahaere

The LEDONE Microwave Motion Sensor operates by detecting movement within its 360-degree detection zone. Once configured, the sensor will automatically control connected lighting based on presence detection and ambient light levels (if daylight harvesting is enabled).

Mahi Aunoa:

When motion is detected, the sensor will activate the connected lighting.
If no motion is detected for a pre-set "hold time," the sensor will either dim the lights (if 0-10V dimming is configured) or turn them off completely.
The detection range is up to 20 feet, covering a wide area.

Whakatika Tautuhinga:

Settings such as sensitivity, hold time, and dimming levels can be adjusted via the DIP switches on the unit or through a compatible remote control. Consult the specific configuration guide for your model to understand each setting's function and how to adjust it.

4. Tiaki

The LEDONE Microwave Motion Sensor is designed for minimal maintenance. Regular checks can help ensure continued optimal performance.

Te horoi: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Avoid using abrasive cleaners or solvents.
Tirotiro: Annually inspect the wiring connections for any signs of wear or damage. Ensure the sensor is securely mounted.
Ngā Āhua Taiao: Ensure the sensor is not obstructed by new installations or objects that could interfere with its detection field.

5. Te Raru

If you encounter issues with your LEDONE Microwave Motion Sensor, refer to the following common troubleshooting steps:

Raruraru	Take pea	Rongoā
Lights do not turn on with motion.	Kāore he hiko e tukuna ki te pūoko. Waea hape. Sensor sensitivity set too low. Ārai i te ara kimi.	Takina te wehenga ara iahiko me nga hononga hiko. Manatoko waea ki te hoahoa. Increase sensor sensitivity via DIP switch or remote. Tango i nga arai.
Lights remain on or turn on without motion.	Sensor sensitivity set too high. Interference from external sources (e.g., HVAC, vibrations). Hold time set too long.	Decrease sensor sensitivity. Hurihia te pūoko, te tautuhi ranei i te puna o te pokanoa. Adjust hold time setting.
Kāore te mahi whakaitiiti e mahi.	Incorrect 0-10V wiring. Incompatible dimmer or fixture.	Verify 0-10V wiring connections. Ensure connected fixture and dimmer are 0-10V compatible.

If the problem persists after attempting these solutions, contact LEDONE customer support for further assistance.

6. Whakatakotoranga

Āhuahira	Taipitopito
Waitohu	LEDONE
Tau tauira	0-10V DIMMING (LOD-BRI810-B-D)
Tae	Mā
Puna Mana	Corded Electric (120-277 Vac)
Awhe Morahi	20 Puawai
Momo Whakaeke	Maunga Taiepa
Koki Rapu	360 Waeine
Te Waahi Mahi	-40°F ki te 158°F
Hunga Hua	4.17 x 1.6 x 1.46 inihi
Taumaha Tūemi	1 pauna

7. Nga Korero Whakaputanga

LEDONE products are manufactured to high standards. For specific warranty terms and conditions applicable to your Microwave Motion Sensor, please refer to the documentation included with your purchase or visit the official LEDONE website. LEDONE is based in California and aims to provide quality products and services.

8. Tautoko Kiritaki

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LEDONE Microwave Motion Sensor, please contact LEDONE customer support.

You can typically find contact information on the LEDONE official webpae, ma te kaihokohoko ranei i hokona ai te hua.

Rauemi ipurangi: Tirohia te LEDONE Store on Amazon mo etahi atu korero hua me te tautoko.

LEDONE 0-10V DIMMING (LOD-BRI810-B-D)