User Manual: ANBERNIC RG351M Retro Game Handheld Console

Kupu Whakataki

The ANBERNIC RG351M is a portable retro game handheld console designed for an immersive gaming experience. Featuring a 3.5-inch IPS screen and powered by an RK3326 quad-core processor, it supports a wide range of classic game formats. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Nga korero haumaru

• Kaua e tukuna te taputapu ki te wera nui, te ra tika, te makuku nui ranei.
• A ape i te tuku, te tuku ranei i te taputapu ki nga paanga kaha.
• Use only the provided USB charging cable and a compatible power adapter (maximum load 2A) for charging.
• Kaua e ngana ki te wetewete, ki te whakatika ranei i te taputapu. Tirohia nga kaimahi ratonga whai tohu.
• Tiakina te taputapu mai i te wai me etahi atu wai.
• Me whakarite kia tika te hau i te wa e whakamahia ana me te utu.

Ihirangi mokete

Image: The ANBERNIC RG351M console, its retail packaging, and the included USB charging cable.

Tena koa tirohia nga mea kei roto i te kete i runga i te wetewete pouaka kia mohio kei te noho katoa nga taonga:

• 1 x RG351M Game Console
• 1 x Tauira USB
• 1 x Manual Kaiwhakamahi (tenei tuhinga)
• 1 x 64GB TF Card (pre-installed with games)

Ka mutu te huaview

Mua View

Whakaahua: Mua view of the RG351M console, highlighting the 3.5-inch IPS screen, D-pad, dual analog joysticks, and action buttons (A, B, X, Y), along with SELECT and START buttons.

• Mata IPS 3.5-inihi: Whakaaturanga whakamārama-teitei mō ngā tirohanga mārama.
• Papa-D: Directional pad for navigation and game control.
• Ngā Rākau Harikoa Analog: Dual 3D rocker sticks for precise movement.
• Patene Hohenga (A, B, X, Y): Ngā pātene tāuru petipeti paerewa.
• PONO PAIA: Used for various in-game functions and menu navigation.
• Pātene Tīmata: Used for pausing games, confirming selections, and menu navigation.

Runga me Raro Views (Ports and Controls)

Image: Top edge of the console, displaying the L1, L2, R1, R2 shoulder buttons, a Type-C OTG port, a 3.5mm earphone jack, and another Type-C port labeled OTG/DC for data transfer and charging.

Image: Bottom edge of the console, showing the TF card slot for expandable storage and the recessed Reset button.

• Ngā Pātene L1/L2/R1/R2: Shoulder buttons for additional in-game controls.
• OTG 1 (Type-C): USB Type-C port for data transfer.
• 3.5mm Waea Kaweoro: Mo te hono taringa.
• OTG 2 (Type-C / Charging Port): USB Type-C port for data transfer and charging.
• Kāniwha Kāri TF: For inserting the game TF card (supports up to 256GB).
• Patene Tautuhi Anō: A small, recessed button to restart the device if it becomes unresponsive.
• Kaikōrero: High-quality double horn stereo speakers.

Whakamuri View

Whakaahua: Hoki view of the RG351M console, displaying the ANBERNIC logo, model number (RG351M), and battery specifications (Li-Po 3500mAh).

Tatūnga

1. Whakataki Tuatahi

Before first use, fully charge the console. Connect the provided USB Type-C cable to the OTG 2 (charging) port on the top of the device and the other end to a compatible USB power adapter (not included, recommended 5V/1.3A to 2A). The charging indicator light will illuminate. A full charge typically takes about 4 hours.

2. Te Whakauru i te Kāri TF

The console comes with a 64GB TF card pre-installed with games. If you need to remove or insert the TF card, gently push it into the TF card slot on the bottom of the device until it clicks into place. To remove, push it again until it springs out.

Nga Tohutohu Whakahaere

Te Hiko / Whakaweto

• Hei Whakahiko: Press and hold the Power button (located on the left side) for a few seconds until the screen illuminates.
• Hei Whakaweto: Press and hold the Power button until a power-off menu appears on the screen. Select "Power Off" or "Shutdown". Alternatively, a quick press of the power button will put the device into sleep mode.

Te whakatere i te Pūnaha

The RG351M runs on an open-source Linux system. Use the D-pad or analog joysticks to navigate through menus and game lists. The 'A' button typically confirms selections, and the 'B' button typically goes back.

Te takaro takaro

Select a game from the main menu. The console supports various game formats including PSP, N64, NDS, PS1, CPS1, CPS2, FBA, NEOGEO, GBA, GBC, GB, SFC, FC, MD, SMS, GG, MSX, PCE, WSC, and transplant games. Refer to specific emulator controls within the system for optimal gameplay.

Hononga Wi-Fi

Image: The RG351M console showing a game in progress, with an overlay graphic indicating fast Wi-Fi connectivity (2.4GHz 802.11b/g/n).

The RG351M supports 2.4GHz Wi-Fi (802.11b/g/n) for online features, such as game updates or online multiplayer (where supported by the game/emulator).

• Whakatere ki te tahua tautuhinga pūnaha.
• Select "Network" or "Wi-Fi settings".
• Enable Wi-Fi and select your desired network from the list.
• Whakauruhia te kupuhipa mena ka akiakihia.

Image: Two RG351M consoles held by hands, illustrating the capability for Wi-Fi online combat between players.

Te tiaki

• Te horoi: Use a soft, dry cloth to clean the console's exterior. For the screen, use a microfiber cloth specifically designed for electronics. Do not use liquid cleaners directly on the screen.
• Rokiroki: When not in use for extended periods, store the console in a cool, dry place, away from direct sunlight.
• Tiaki Pūhiko: Hei whakaroa i te ora o te pākahiko, karohia te tuku katoa i te pākahiko. Me utu te taputapu i nga wa katoa, ahakoa kaore i te whakamahia, kia mau tonu te hauora o te pākahiko.
• Whakahōu Pūmanawa: Periodically check for system updates (if available through the open-source community) to ensure optimal performance and compatibility.

Raparongoā

Whakatakotoranga

Image: A composite image showing the ANBERNIC RG351M from various angles, including front, top, bottom, sides, and back, providing a comprehensive view of its design and ports.

Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the retailer or the official ANBERNIC website. Keep your proof of purchase for warranty claims. This manual provides general guidance; specific software-related issues may require consulting community forums or official support channels.