AIYIMA A05

AIYIMA A05 TPA3221 Power AmpAwhina Kaiwhakamahi lifier

Tauira: A05

1. Kupu Whakataki

Thank you for choosing the AIYIMA A05 TPA3221 Power Amplifier. This compact 2.0 channel stereo amplifier is designed to deliver high-fidelity audio to passive speakers, featuring both Bluetooth and RCA input options. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Nga Tohutohu Haumaru

  • Tuku Hiko: Use only the specified power adapter (DC 12-32V) to prevent damage. Ensure the power outlet voltage he hototahi.
  • Whakahau: Whakanohoia te amplifier in a well-ventilated area. Do not block ventilation openings. Avoid placing it on soft surfaces that may obstruct airflow.
  • makuku: Keep the device away from water, humidity, and liquids. Do not operate with wet hands.
  • wera: Avoid direct sunlight, heat sources, or extreme temperatures.
  • Te horoi: Momotuhia te hiko i mua i te horoi. Whakamahia he kakahu ngohengohe, maroke. Kaua e whakamahi i te wai, i te horoi aerosol ranei.
  • Ratonga: Kaua e ngana ki te whakatika, ki te wetewete ranei i te waahanga. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.
  • Tamariki: Kaua e taea e nga tamariki.

3. Ihirangi mokete

Tena koa tirohia te kete mo nga mea e whai ake nei:

  • AIYIMA A05 Bluetooth 5.0 Ampwhakarara x 1
  • Antenna Nihokikorangi x 1
  • Pukapuka Kaiwhakamahi x 1
  • Kaari Raati x 1
  • Pūurutau Hiko 32V DC x 1
AIYIMA A05 Amplifier Package Contents

Whakaahua 3.1: Contents of the AIYIMA A05 amplifier package, including the amplifier unit, Bluetooth antenna, user manual, warranty card, and power adapter.

4. Hua Neke Atuview

4.1 Mana Paewhiri Mua

AIYIMA A05 Front Panel Controls

Whakaahua 4.1: Front panel of the AIYIMA A05 amplifier, showing the power switch, input indicator, treble, bass, and volume controls.

  • Whakawhiti Hiko (KA/OFF): Takahuri ai i te ampmana whakaahuru.
  • BT/RCA Indicator: Displays the active input source. Green indicates Bluetooth (BT) input, Red indicates RCA input.
  • Mana Takitoru: Whakaritea te putanga ororongo auau teitei.
  • Mana Panguru: Whakaritea te putanga ororongo iti-auau.
  • Mana Rōrahi: Adjusts the overall audio output level.
Close-up of AIYIMA A05 Power Switch and Input Indicator

Whakaahua 4.2: Kati-ake view of the power switch and the BT/RCA input indicator on the front panel.

Close-up of AIYIMA A05 Treble, Bass, and Volume Knobs

Whakaahua 4.3: Kati-ake view of the Treble, Bass, and Volume control knobs.

4.2 Hononga Paewhiri Whakamuri

AIYIMA A05 Rear Panel Connections

Whakaahua 4.4: Rear panel of the AIYIMA A05 amplifier, showing the Bluetooth antenna port, RCA audio input, speaker outputs, and DC power input.

  • ANT (Bluetooth Antenna Port): Connect the included Bluetooth antenna here for wireless audio reception.
  • AUDIO IN (RCA Input): Connect audio sources (e.g., CD player, TV, DAC) using RCA cables.
  • SPEAKER (Audio Output): Connect passive speakers using speaker wires. Ensure correct polarity (+ to + and - to -).
  • DC 24-32V (Power Input): Connect the provided DC power adapter.

5. Tohutohu Tatūnga

Whāia ēnei mahi hei whakarite i tō AIYIMA A05 ampKaiwhakaora:

  1. Honoa te Pūihi Nihokikorangi: Screw the included Bluetooth antenna into the ANT port on the rear panel.
  2. Tūhono Kaikōrero: Connect your passive speakers to the SPEAKER output terminals on the rear panel. Ensure the positive (+) terminal of the amplifier connects to the positive (+) terminal of the speaker, and the negative (-) terminal connects to the negative (-).
  3. Connect Audio Source (RCA): If using a wired audio source, connect it to the AUDIO IN (RCA) ports on the rear panel using appropriate RCA cables.
  4. Hono Hono: Connect the DC power adapter to the DC 24-32V input port on the rear panel, then plug the adapter into a wall outlet.
  5. Whakahiko: Flip the power switch on the front panel to the "ON" position. The input indicator will light up.
AIYIMA A05 Rear Panel with Cables Connected

Whakaahua 5.1: Te papa o muri o te amplifier with Bluetooth antenna, RCA cables, speaker wires, and power adapter connected.

6. Nga Tohutohu Whakahaere

6.1 Kei te Hiko / Weto

Ki te mana i runga i te amplifier, flip the front panel switch to the "ON" position. To power off, flip the switch to the "OFF" position.

6.2 Hononga Nihokikorangi

  1. Me whakarite te amplifier is powered on and the BT/RCA indicator is green, indicating Bluetooth mode. If it's red, ensure no RCA cable is connected or disconnect it.
  2. On your mobile device (phone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Tīpakohia "AIYIMA A05" mai i te rārangi o ngā pūrere hei hono.
  4. Once paired, the indicator light will remain green, and you can play audio from your device through the ampkaikawe

6.3 RCA Input Usage

  1. Connect your audio source to the RCA input ports on the rear panel.
  2. Me whakarite te amplifier is powered on. The BT/RCA indicator should be red, indicating RCA input mode.
  3. If the indicator is green (Bluetooth mode), ensure Bluetooth is disconnected on any paired device, or turn off Bluetooth on your mobile device to switch to RCA input.
Important Note on Input Priority: When both Bluetooth and RCA inputs are connected, the Bluetooth input has priority. After Bluetooth is connected, the RCA input is automatically disconnected. When analog (RCA) input is required, please turn off the Bluetooth function on your mobile device to switch inputs.

6.4 Te Whakatikatika i te Ororongo

  • Rōrahi: Rotate the "VOL" knob clockwise to increase volume and counter-clockwise to decrease.
  • Takitoru: Rotate the "TREBLE" knob to adjust high-frequency sounds to your preference.
  • Paoro: Rotate the "BASS" knob to adjust low-frequency sounds to your preference.

7. Tiaki

  • Te horoi: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the amplifier. Do not use harsh chemicals or abrasive materials.
  • Rokiroki: If not in use for an extended period, store the amppenapena ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
  • Hononga: Ia wa, tirohia nga hononga taura katoa kia noho haumaru, kia kore e pirau.

8. Te Raru

Mena ka pāngia koe e ngā raruraru me tō AIYIMA A05 amplifier, tirohia nga raru me nga otinga e whai ake nei:

RaruraruTake peaRongoā
Kaore he putanga oro
  • Karekau te hiko i hono, ka weto ranei.
  • Kua he te whakaurunga i tohua.
  • Kua wetekina nga waea orooro, kua he ranei te hono.
  • He iti rawa te rōrahi.
  • take puna ororongo.
  • Ensure power adapter is connected and switch is ON.
  • Verify BT/RCA indicator shows the desired input. Disconnect Bluetooth on device if using RCA.
  • Tirohia ngā hononga waea kaikorero mō te tika o te polarity me te piripono.
  • Whakanuia te rōrahi i runga i ampkaiwhakarewa me te puna ororongo.
  • Whakamātauria ki tētahi atu pūtake oro.
Distorted or buzzing sound
  • Hononga wetekina.
  • He kaha rawa te tohu tāuru.
  • Operating in cold temperatures.
  • Pūtake oro hapa, taura rānei.
  • Tirohia nga hononga taura katoa.
  • Whakaitihia te rōrahi o te pūtake oro.
  • Me whakarite te amplifier is operating within a reasonable temperature range (above 40°F/4°C).
  • Whakamātauria he puna ororongo rereke, he taura ranei.
Nihokikorangi kore hono
  • Ampkarekau i te aratau takirua.
  • He tawhiti rawa te taputapu ampkaikawe
  • Bluetooth already connected to another device.
  • Te pokanoa.
  • Whakaritea amplifier is powered on and indicator is green.
  • Nukuhia to taputapu kia tata atu ki te ampkaikawe
  • Momotu mai i ētahi atu taputapu Nihokikorangi.
  • Tīmata anō te rua amplifier me to taputapu Nihokikorangi.
Loud noise/ticking on startup
  • Normal power-up sequence (brief).
  • Te take tuku hiko.
  • Te take o roto.
  • A brief noise during power-up may be normal. If persistent or excessive, check power supply.
  • Ensure power supply is stable and correct voltage.
  • If noise persists or is severe, contact customer support.

If the problem persists after trying these solutions, please contact AIYIMA customer support for further assistance.

9. Whakatakotoranga

AIYIMA A05 Ampte rahinga whakaahuru

Whakaahua 9.1: Ngā Ahu o te AIYIMA A05 amplifier: 107mm (4.2in) width, 87mm (3.4in) depth, 36mm (1.4in) height.

ĀhuahiraWhakatakotoranga
TauiraA05
Te Mana Putanga105 Watts (at 4 Ω)
Te maha o nga hongere2.0 (Tirotoro)
Putanga NihokikorangiQCC3034 APTX Bluetooth 5.0
TiwhiketeTPA3221
Voltage12 Volts (DC)
Tukunga Mōrahi Voltage32 Volts (DC)
Taumaha Tūemi500 Karamu
Ahu (Ahua)107mm (W) x 87mm (D) x 36mm (H)

10. Pūtāhui me te Tautoko

The AIYIMA A05 amplifier comes with a warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact AIYIMA customer service through the retailer where the product was purchased or visit the official AIYIMA webpae.

Rauemi ipurangi: For additional information and support, you may visit the AIYIMA store page: AIYIMA Official Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.